Royal Enfield Meteor 350 — Example photo: UliBe43, CC0, Wikimedia Commons

Have this bike? Send a photo or the manual's service chart

Royal Enfield · Royal Enfield UCE / J / twins (2008-)

Meteor 350

Library entry covers 2020-2026

19 factory 31 guideline

Published source

Royal Enfield Meteor 350 Owner's Manual (USA), Part No. RAM01272/A, 2nd December 2025

Factory owner's handbook. Covers Meteor 350 USA manual, 2 Dec 2025.

Open the source

50 items for a 2026 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)

Engine cycle: Four-stroke
Engine lubrication: Wet sump (oil in crankcase)
Oil filtration: Replaceable cartridge or spin-on filter
Valve gear: Overhead cam, screw/locknut adjusters
Ignition: Electronic (CDI / transistor / ECU)
Charging: Alternator / stator with rectifier
Battery: Wet cell (flooded lead-acid, needs topping up)
Fuel system: Fuel injection
Cooling: Air / oil cooled
Primary drive: Gear or chain inside engine, shares engine oil
Gearbox oil: Shares engine oil
Clutch control: Hand lever, cable
Final drive: Chain
Front suspension: Telescopic fork
Rear suspension: Swingarm, twin shocks
Front brake: Disc, hydraulic
Rear brake: Disc, hydraulic
Wheels: Spoked, tubed
Sidecar: No sidecar

Maintenance schedule

2026 Royal Enfield Meteor 350

On the road: every 300 mi

2 items

Check lights, horn, brake light switches

Pre-ride / on the road

Guideline
Check tire pressures

Pre-ride / on the road

Guideline

On the road: every 600 mi

1 item

Check chain slack and rear wheel alignment

Pre-ride / on the road

Guideline

On the road: every 621 mi

2 items

Check engine oil level

Pre-ride / on the road

Factory

Manual: Engine oil level. Factory: Check every 1,000 km and top up.
Lubricate drive chain

Pre-ride / on the road

Factory

Manual: Rear wheel drive chain. Factory: Clean and lubricate every 1,000 km; clean, lube, adjust every 5,000 km.

Every 621 mi

2 items

Adjust clutch free play, lubricate cable and lever pivot

Primary and gearbox

Factory

Manual: Clutch lever/cable free play. Factory: Adjust every 1,000 km or earlier.
Lubricate control cables and lever pivots

Controls and cables

Factory

Manual: Hand levers and foot levers. Factory: Lubricate every 1,000 km or earlier.

Every 3,000 mi or 6 months

5 items

Clean / inspect air filter

Fuel and air

Factory

Manual: Air filter element. Factory: C at 0.5k and odd 5k columns.
Clean battery terminals, check charge and strap

Ignition and electrics

Factory

Manual: Battery terminals (apply petroleum jelly). Factory: C every column.
Grease and check center / side stand and springs

Rear suspension and frame

Factory

Manual: Pivots: side/center stand, footrest, shifter, brake pedal, levers. Factory: L every column.
Check brake pads and discs

Brakes

Factory

Manual: Brake pads, front and rear. Factory: I every column.
Inspect tire tread, sidewalls and date codes

Wheels and tires

Factory

Manual: Tire wear pattern, front and rear. Factory: I every column.

Every 3,000 mi or 12 months

6 items

Clean drive chain thoroughly (remove and soak, re-lube)

Final drive

Guideline

Non O-ring chains on old machines: remove, clean, soak in hot chain grease or lube, refit with the master link clip closed end leading.
Inspect chain and sprockets for wear (measure stretch)

Final drive

Guideline
Inspect fork seals, stanchions and fork boots

Front end

Guideline
Check footrests, pegs, rear brake and gear lever pivots

Rear suspension and frame

Guideline
Check spoke tension and wheel true

Wheels and tires

Guideline
Check wheel bearings for play

Wheels and tires

Guideline

Every 3,107 mi

3 items

Check throttle cable(s) free play and return

Fuel and air

Factory

Manual: Throttle cable. Factory: Adjust every 5,000 km or earlier.
Check steering head bearing adjustment

Front end

Factory

Manual: Steering ball races play. Factory: Inspect/adjust; lubricate every 5,000 km or earlier.
Grease swingarm pivot

Rear suspension and frame

Factory

Manual: Swing arm pivot bush and spacer. Factory: Lubricate every 5,000 km or earlier if required.

Every 4,000 mi or 12 months

1 item

Inspect, clean and gap spark plugs

Engine

Guideline

Every 6,000 mi or 12 months

7 items

Change engine oil

Engine

Factory

Manual: Engine oil (level check/replace). Factory: R I R I... from 0.5k km; cols 5k km/3k mi/6 mo apart.
Replace oil filter

Engine

Factory

Manual: Engine oil filter element. Factory: 6 R marks over 11 columns, matched to oil-change columns.
Replace air filter element

Fuel and air

Factory

Manual: Air filter element. Factory: R at 10, 20, 30, 40, 50k km.
Check charging voltage and regulator / cut-out

Ignition and electrics

Guideline
Check swingarm bushes for play

Rear suspension and frame

Guideline
Inspect rear shocks for leaks and damping

Rear suspension and frame

Guideline
Lubricate speedometer / tachometer cables, check drive

Controls and cables

Guideline

A dry speedo cable whips the needle and eventually kills the instrument.

Every 6,214 mi or 12 months

1 item

Throttle body cleaning

Engine

Factory

Factory: Remove, clean with dry microfiber cloth; no solvents.

Every 8,000 mi or 2 years

1 item

Check and adjust valve clearances

Engine

Guideline

Every 10,000 mi or 2 years

1 item

Compression test (or leak-down)

Engine

Guideline

Every 12,000 mi or 2 years

3 items

Synchronize throttle bodies

Fuel and air

Guideline
Change fork oil

Front end

Factory

Manual: Front fork oil. Factory: R at 20k and 40k km; I otherwise.
Replace brake fluid

Brakes

Factory

Manual: Brake fluid level, front and rear disc. Factory: R at 20k and 40k km; I otherwise.

Every 16,000 mi or 4 years

1 item

Replace spark plugs

Engine

Guideline

Every 18,000 mi

1 item

Replace chain and sprockets (wear based)

Final drive

Guideline

Every 20,000 mi or 4 years

2 items

Repack / replace steering head bearings

Front end

Guideline

Many old machines use loose balls in cups and cones. Taper roller conversions are common.
Repack / replace wheel bearings

Wheels and tires

Guideline

Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 24,000 mi or 4 years

2 items

Evaporative emission rubber hoses and drain: replace

Engine

Factory

Factory: R at 40k km column only; I elsewhere.
Replace fuel filter

Fuel and air

Guideline

Every 25,000 mi or 6 years

1 item

Replace swingarm bushes / bearings

Rear suspension and frame

Guideline

Every 30,000 mi or 6 years

1 item

Rebuild forks: seals, bushes, springs

Front end

Guideline

Every 2 years

2 items

Inspect wiring, bullet connectors and ground points

Ignition and electrics

Guideline
Inspect frame, welds and lugs for cracks

Rear suspension and frame

Guideline

Every 4 years

3 items

Replace fuel lines

Fuel and air

Guideline

Old rubber and modern ethanol fuel do not mix well.
Inspect brake hoses; replace old rubber

Brakes

Guideline
Rebuild calipers and master cylinders (seals)

Brakes

Guideline

Every 6 years

2 items

Replace inner tubes and rim tape with tires

Wheels and tires

Guideline
Replace tires on age (regardless of tread)

Wheels and tires

Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.