No photo of this model in the library yet.

Have this bike? Send a photo or the manual's service chart

Royal Enfield · Shim-adjusted overhead-cam four-stroke, wet sump, gearbox shares engine oil, chain drive

Shotgun 650

Library entry covers 2024-2025

28 factory 29 guideline

Published source

Royal Enfield Shotgun 650 Owner's Manual (India), Periodic Maintenance Chart

Factory owner's handbook. Covers Shotgun 650, India edition 29 January 2025 (Part No. RAM00627/A), km only.

57 items for a 2025 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)

Engine cycle: Four-stroke
Engine lubrication: Wet sump (oil in crankcase)
Oil filtration: Replaceable cartridge or spin-on filter
Valve gear: Overhead cam, shim adjusted (incl. desmo)
Ignition: Electronic (CDI / transistor / ECU)
Charging: Alternator / stator with rectifier
Battery: Wet cell (flooded lead-acid, needs topping up)
Fuel system: Fuel injection
Cooling: Air / oil cooled
Primary drive: Gear or chain inside engine, shares engine oil
Gearbox oil: Shares engine oil
Clutch control: Hand lever, cable
Final drive: Chain
Front suspension: Telescopic fork
Rear suspension: Swingarm, twin shocks
Front brake: Disc, hydraulic
Rear brake: Disc, hydraulic
Wheels: Cast / alloy, tubeless
Sidecar: No sidecar

Maintenance schedule

2025 Royal Enfield Shotgun 650

On the road: every 200 mi

1 item

Check engine oil level

Pre-ride / on the road

Guideline

Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 300 mi

2 items

Check lights, horn, brake light switches

Pre-ride / on the road

Guideline
Check tire pressures

Pre-ride / on the road

Guideline

On the road: every 311 mi

1 item

Lubricate drive chain

Pre-ride / on the road

Factory

Manual: Rear wheel drive chain. Factory: Clean, lubricate and adjust every 500 km or earlier as required.

On the road: every 600 mi

1 item

Check chain slack and rear wheel alignment

Pre-ride / on the road

Guideline

Every 621 mi

3 items

Engine oil: check level and top up

Engine

Factory

Factory: As printed: Check level at every 1000 km or earlier and top up as required
Adjust clutch free play, lubricate cable and lever pivot

Primary and gearbox

Factory

Manual: Clutch cable / lever free play. Factory: Adjust every 1000 km or earlier as required.
Lubricate control cables and lever pivots

Controls and cables

Factory

Manual: Clutch lever & front brake lever pivots. Factory: Lubricate every 1000 km or earlier as required.

Every 3,000 mi or 12 months

4 items

Clean drive chain thoroughly (remove and soak, re-lube)

Final drive

Guideline

Non O-ring chains on old machines: remove, clean, soak in hot chain grease or lube, refit with the master link clip closed end leading.
Inspect chain and sprockets for wear (measure stretch)

Final drive

Guideline
Inspect fork seals, stanchions and fork boots

Front end

Guideline
Check wheel bearings for play

Wheels and tires

Guideline

Every 3,107 mi or 6 months

16 items

All mounting fasteners in vehicle for tightness: I

Engine

Factory

Factory: As printed: mark in all 11 columns (0.5, 5, 10 ... 50 x1000 km)
Evaporative emission equipment rubber hoses: I

Engine

Factory

Factory: As printed: mark in all 11 columns (0.5, 5, 10 ... 50 x1000 km)
HT lead: I

Engine

Factory

Factory: As printed: mark in all 11 columns (0.5, 5, 10 ... 50 x1000 km)
Rider and pillion footrest pivot: L / I

Engine

Factory

Factory: As printed: mark in all 11 columns (0.5, 5, 10 ... 50 x1000 km); L at 0.5 through 40, I at 45 and 50
Rubber hose, Inlet manifold / Adapter: I

Engine

Factory

Factory: As printed: mark in all 11 columns (0.5, 5, 10 ... 50 x1000 km)
Check throttle cable(s) free play and return

Fuel and air

Factory

Manual: Throttle cable. Factory: Adjust every column (0.5, 5, 10 ... 50 x1,000 km).
Clean / inspect air filter

Fuel and air

Factory

Manual: Air filter element. Factory: Clean at 500 km and 5,000 km columns between replacements.
Rubber hose, Air filter to throttle body: I

Fuel and air

Factory

Factory: As printed: mark in all 11 columns (0.5, 5, 10 ... 50 x1000 km)
Vent pipe under air filter box: I

Fuel and air

Factory

Factory: As printed: mark in all 11 columns (0.5, 5, 10 ... 50 x1000 km)
Clean battery terminals, check charge and strap

Ignition and electrics

Factory

Manual: Battery terminals (apply petroleum jelly). Factory: Inspect every column.
Check steering head bearing adjustment

Front end

Factory

Manual: Headstock bearings. Factory: Inspect every column.
Check footrests, pegs, rear brake and gear lever pivots

Rear suspension and frame

Factory

Manual: Rear brake pedal and gear change pedal pivot. Factory: Lubricate every column.
Grease and check center / side stand and springs

Rear suspension and frame

Factory

Manual: Side stand & center stand pivots. Factory: Lubricate every column.
Check brake pads and discs

Brakes

Factory

Manual: Brake pads - Front and Rear. Factory: Inspect every column.
Inspect brake hoses; replace old rubber

Brakes

Factory

Manual: Brake hose and banjo bolt - Front and rear. Factory: Inspect every column.
Inspect tire tread, sidewalls and date codes

Wheels and tires

Factory

Manual: Tire wear pattern front and rear. Factory: Inspect every column.

Every 4,000 mi or 12 months

1 item

Inspect, clean and gap spark plugs

Engine

Guideline

Every 6,000 mi or 12 months

5 items

Earth wire eyelet tightness (inspect)

Engine

Factory

Factory: I at 10000, 20000, 30000, 40000, 45000 and 50000 km Re-read from Royal Enfield Shotgun 650 owner's manual (India) pages 116-117, periodical maintenance chart
Check charging voltage and regulator / cut-out

Ignition and electrics

Guideline
Check swingarm bushes for play

Rear suspension and frame

Guideline
Inspect rear shocks for leaks and damping

Rear suspension and frame

Guideline
Lubricate speedometer / tachometer cables, check drive

Controls and cables

Guideline

A dry speedo cable whips the needle and eventually kills the instrument.

Every 6,214 mi or 12 months

1 item

Replace air filter element

Fuel and air

Factory

Manual: Air filter element. Factory: R every 10,000 km / 12 months, whichever earlier.

Every 10,000 mi or 2 years

1 item

Compression test (or leak-down)

Engine

Guideline

Every 12,000 mi or 2 years

3 items

Synchronize throttle bodies

Fuel and air

Guideline
Grease swingarm pivot

Rear suspension and frame

Guideline
Rear wheel cush rubbers (inspect)

Wheels and tires

Factory

Factory: I at 20000 km / 24 months and 40000 km / 48 months Re-read from Royal Enfield Shotgun 650 owner's manual (India) pages 116-117, periodical maintenance chart

Every 12,427 mi or 2 years

2 items

Replace spark plugs

Engine

Factory

Manual: Spark plug. Factory: R at 20,000 km / 24 months and 40,000 km; inspect other columns.
Replace brake fluid

Brakes

Factory

Manual: Brake fluid - Front and Rear. Factory: R at 20,000 km / 24 months and 40,000 km.

Every 15,000 mi or 3 years

1 item

Change fork oil

Front end

Guideline

Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 15,000 mi or 4 years

1 item

Check valve clearances (shim adjusted)

Engine

Guideline

Every 18,000 mi

1 item

Replace chain and sprockets (wear based)

Final drive

Guideline

Every 20,000 mi or 4 years

2 items

Repack / replace steering head bearings

Front end

Guideline

Many old machines use loose balls in cups and cones. Taper roller conversions are common.
Repack / replace wheel bearings

Wheels and tires

Guideline

Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 24,000 mi or 4 years

1 item

Replace fuel filter

Fuel and air

Guideline

Every 25,000 mi or 6 years

1 item

Replace swingarm bushes / bearings

Rear suspension and frame

Guideline

Every 30,000 mi or 6 years

1 item

Rebuild forks: seals, bushes, springs

Front end

Guideline

Every 12 months

3 items

Change engine oil

Engine

Factory

Manual: Engine oil. Factory: After first service, replace every 12 months regardless of km; chart km columns not verified.
Check and adjust valve clearances

Engine

Factory

Manual: Inlet and exhaust valve clearance. Factory: After first service, adjust every 12 months regardless of km.
Replace oil filter

Engine

Factory

Manual: Engine oil filter. Factory: After first service, replace every 12 months regardless of km.

Every 2 years

2 items

Inspect wiring, bullet connectors and ground points

Ignition and electrics

Guideline
Inspect frame, welds and lugs for cracks

Rear suspension and frame

Guideline

Every 4 years

2 items

Replace fuel lines

Fuel and air

Guideline

Old rubber and modern ethanol fuel do not mix well.
Rebuild calipers and master cylinders (seals)

Brakes

Guideline

Every 6 years

1 item

Replace tires on age (regardless of tread)

Wheels and tires

Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.