
Skymax (124 cc)
Library entry covers 2016-2021
Published source
Skyteam ST 125-6 Operation Instruction Manual, Periodic maintenance chart p.27, key p.28 (ManualsLib 3830008 page 16)
Factory owner's handbook. Covers Skyteam ST 50-6 / ST 110-6 / ST 125-6 operation instruction manual, undated; the manual does not use the name Skymax (ST 125-6 is listed as the Skymax by a vehicle listing site).
65 items for a 2017 model, grouped by interval the way a factory chart is laid out.
How this bike is built (what the schedule is based on)
- Engine cycle
- Four-stroke
- Engine lubrication
- Wet sump (oil in crankcase)
- Oil filtration
- Replaceable cartridge or spin-on filter
- Valve gear
- Overhead cam, screw/locknut adjusters
- Ignition
- Electronic (CDI / transistor / ECU)
- Charging
- Alternator / stator with rectifier
- Battery
- Wet cell (flooded lead-acid, needs topping up)
- Fuel system
- Fuel injection
- Cooling
- Air / oil cooled
- Primary drive
- Gear or chain inside engine, shares engine oil
- Gearbox oil
- Shares engine oil
- Clutch control
- Hand lever, cable
- Final drive
- Chain
- Front suspension
- Telescopic fork
- Rear suspension
- Swingarm, twin shocks
- Front brake
- Disc, hydraulic
- Rear brake
- Disc, hydraulic
- Wheels
- Spoked, tubed
- Sidecar
- No sidecar
2017 Skyteam Skymax (124 cc)
On the road: every 300 km
1 item-
Check engine oil levelPre-ride / on the roadGuideline
Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.
On the road: every 500 km
3 items-
Check lights, horn, brake light switchesPre-ride / on the roadGuideline
-
Check tire pressuresPre-ride / on the roadGuideline
-
Lubricate drive chainPre-ride / on the roadGuideline
Lube warm, ideally at the end of the riding day so it soaks in overnight. Sooner after rain.
On the road: every 1,000 km
1 item-
Check chain slack and rear wheel alignmentPre-ride / on the roadGuideline
Every 1,600 km or 6 months
1 item-
Inspect tire tread, sidewalls and date codesWheels and tiresGuideline
Every 2,000 km
17 items-
All fasteners (check)EngineFactory
Factory: Periodic maintenance chart (p.27): check at 1,000 km (initial); check at 1,600 km; check at 3,000 km; check at 5,000 km; check at every 2,000 to 3,000 km afterwards. Printed as "all parts for fixing". Codes: C = check; CL = clean; A = adjustment; R = replace; O = oil. Items marked * are for an authorized Skyteam dealer or qualified service personnel. The interval filed is the lower end of "every 2,000 to 3,000 km".
-
Engine mounting bolts and nuts (check)EngineFactory
Factory: Periodic maintenance chart (p.27): check at 1,000 km (initial); check at 1,600 km; check at 3,000 km; check at 5,000 km; check at every 2,000 to 3,000 km afterwards. Marked *. Codes: C = check; CL = clean; A = adjustment; R = replace; O = oil. Items marked * are for an authorized Skyteam dealer or qualified service personnel. The interval filed is the lower end of "every 2,000 to 3,000 km".
-
Oil filter mesh screen (check)EngineFactory
Factory: Periodic maintenance chart (p.27): check at 1,000 km (initial); check at 1,600 km; check at 3,000 km; check at 5,000 km; check at every 2,000 to 3,000 km afterwards. Codes: C = check; CL = clean; A = adjustment; R = replace; O = oil. Items marked * are for an authorized Skyteam dealer or qualified service personnel. The interval filed is the lower end of "every 2,000 to 3,000 km".
-
Spark plug (check)EngineFactory
Factory: Periodic maintenance chart (p.27): check at 1,000 km (initial); check at 1,600 km; check at 3,000 km; check at 5,000 km; check at every 2,000 to 3,000 km afterwards. Codes: C = check; CL = clean; A = adjustment; R = replace; O = oil. Items marked * are for an authorized Skyteam dealer or qualified service personnel. The interval filed is the lower end of "every 2,000 to 3,000 km".
-
Valve clearance, cold (check, adjust)EngineFactory
Factory: Periodic maintenance chart (p.27): check at 1,000 km (initial); check at 1,600 km; check at 3,000 km; adjust at 5,000 km; check and adjust at every 2,000 to 3,000 km afterwards. Note 4: check the valves every 1,500 km; cold clearance 0.05 mm. Marked *. Codes: C = check; CL = clean; A = adjustment; R = replace; O = oil. Items marked * are for an authorized Skyteam dealer or qualified service personnel. The interval filed is the lower end of "every 2,000 to 3,000 km".
-
Air cleaner (clean)Fuel and airFactory
Factory: Periodic maintenance chart (p.27): clean at 3,000 km; clean at every 2,000 to 3,000 km afterwards. Codes: C = check; CL = clean; A = adjustment; R = replace; O = oil. Items marked * are for an authorized Skyteam dealer or qualified service personnel. The interval filed is the lower end of "every 2,000 to 3,000 km".
-
Carburetor (check, adjust)Fuel and airFactory
Factory: Periodic maintenance chart (p.27): check at 1,000 km (initial); clean at 1,600 km; check at 3,000 km; check at 5,000 km; check and adjust at every 2,000 to 3,000 km afterwards. Codes: C = check; CL = clean; A = adjustment; R = replace; O = oil. Items marked * are for an authorized Skyteam dealer or qualified service personnel. The interval filed is the lower end of "every 2,000 to 3,000 km".
-
Fuel lines (check)Fuel and airFactory
Factory: Periodic maintenance chart (p.27): check at 1,000 km (initial); check at 1,600 km; check at 3,000 km; check at 5,000 km; check at every 2,000 to 3,000 km afterwards. Marked *. Codes: C = check; CL = clean; A = adjustment; R = replace; O = oil. Items marked * are for an authorized Skyteam dealer or qualified service personnel. The interval filed is the lower end of "every 2,000 to 3,000 km".
-
Fuel tank valve (check)Fuel and airFactory
Factory: Periodic maintenance chart (p.27): check at 1,000 km (initial); check at 3,000 km; check at 5,000 km; check at every 2,000 to 3,000 km afterwards. Printed as "fuel tank cock". Codes: C = check; CL = clean; A = adjustment; R = replace; O = oil. Items marked * are for an authorized Skyteam dealer or qualified service personnel. The interval filed is the lower end of "every 2,000 to 3,000 km".
-
Gearbox lube oil (replace)Primary and gearboxFactory
Factory: Periodic maintenance chart (p.27): replace at 1,000 km (initial); replace at 1,600 km; replace at 3,000 km; replace at 5,000 km; replace at every 2,000 to 3,000 km afterwards. Codes: C = check; CL = clean; A = adjustment; R = replace; O = oil. Items marked * are for an authorized Skyteam dealer or qualified service personnel. The interval filed is the lower end of "every 2,000 to 3,000 km".
-
Drive chain tension (check, adjust)Final driveFactory
Factory: Periodic maintenance chart (p.27): check at 1,000 km (initial); check at 1,600 km; adjust at 3,000 km; adjust at 5,000 km; check and adjust at every 2,000 to 3,000 km afterwards. Codes: C = check; CL = clean; A = adjustment; R = replace; O = oil. Items marked * are for an authorized Skyteam dealer or qualified service personnel. The interval filed is the lower end of "every 2,000 to 3,000 km".
-
Steering (check)Front endFactory
Factory: Periodic maintenance chart (p.27): check at 1,000 km (initial); check at 1,600 km; check at 3,000 km; check at 5,000 km; check at every 2,000 to 3,000 km afterwards. Marked *. Codes: C = check; CL = clean; A = adjustment; R = replace; O = oil. Items marked * are for an authorized Skyteam dealer or qualified service personnel. The interval filed is the lower end of "every 2,000 to 3,000 km".
-
Brakes, front and rear (check)BrakesFactory
Factory: Periodic maintenance chart (p.27): check at 1,000 km (initial); check at 1,600 km; check at 3,000 km; check at 5,000 km; check at every 2,000 to 3,000 km afterwards. Note 5: brake shoe lining wear limit 1.5 mm; replace shoes as a set. Marked *. Codes: C = check; CL = clean; A = adjustment; R = replace; O = oil. Items marked * are for an authorized Skyteam dealer or qualified service personnel. The interval filed is the lower end of "every 2,000 to 3,000 km".
-
Front and rear wheel bearings (check)Wheels and tiresFactory
Factory: Periodic maintenance chart (p.27): check at 1,000 km (initial); oil at 5,000 km; check at every 2,000 to 3,000 km afterwards. Marked *. Codes: C = check; CL = clean; A = adjustment; R = replace; O = oil. Items marked * are for an authorized Skyteam dealer or qualified service personnel. The interval filed is the lower end of "every 2,000 to 3,000 km".
-
Tire pressure (check)Wheels and tiresFactory
Factory: Periodic maintenance chart (p.27): check at 1,000 km (initial); check at 3,000 km; check at 5,000 km; check at every 2,000 to 3,000 km afterwards. Codes: C = check; CL = clean; A = adjustment; R = replace; O = oil. Items marked * are for an authorized Skyteam dealer or qualified service personnel. The interval filed is the lower end of "every 2,000 to 3,000 km".
-
Speedometer cable (check)Controls and cablesFactory
Factory: Periodic maintenance chart (p.27): check at 1,000 km (initial); check at 5,000 km; check at every 2,000 to 3,000 km afterwards. Printed as "speedometer soft spindle". Codes: C = check; CL = clean; A = adjustment; R = replace; O = oil. Items marked * are for an authorized Skyteam dealer or qualified service personnel. The interval filed is the lower end of "every 2,000 to 3,000 km".
-
Throttle grip and cable (check)Controls and cablesFactory
Factory: Periodic maintenance chart (p.27): check at 1,000 km (initial); check at 3,000 km; check at 5,000 km; check at every 2,000 to 3,000 km afterwards. Codes: C = check; CL = clean; A = adjustment; R = replace; O = oil. Items marked * are for an authorized Skyteam dealer or qualified service personnel. The interval filed is the lower end of "every 2,000 to 3,000 km".
Every 5,000 km or 12 months
10 items-
Check throttle cable(s) free play and returnFuel and airGuideline
-
Clean drive chain thoroughly (remove and soak, re-lube)Final driveGuideline
Non O-ring chains on old machines: remove, clean, soak in hot chain grease or lube, refit with the master link clip closed end leading.
-
Inspect chain and sprockets for wear (measure stretch)Final driveGuideline
-
Check steering head bearing adjustmentFront endGuideline
-
Inspect fork seals, stanchions and fork bootsFront endGuideline
-
Check footrests, pegs, rear brake and gear lever pivotsRear suspension and frameGuideline
-
Grease and check center / side stand and springsRear suspension and frameGuideline
-
Check brake pads and discsBrakesGuideline
-
Check spoke tension and wheel trueWheels and tiresGuideline
-
Check wheel bearings for playWheels and tiresGuideline
Every 6,500 km or 12 months
2 items-
Inspect, clean and gap spark plugsEngineGuideline
-
Adjust clutch free play, lubricate cable and lever pivotPrimary and gearboxGuideline
Every 8,000 km or 12 months
2 items-
Change engine oilEngineGuideline
Pre-1970 machines: many owners run non-detergent or classic-spec oil with no filter, so short intervals matter. Dry sump: drain the tank and the crankcase/sump, flush the tank and clean the feed and return screens.
-
Replace oil filterEngineGuideline
Every 9,500 km or 12 months
6 items-
Clean / inspect air filterFuel and airGuideline
Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
-
Check charging voltage and regulator / cut-outIgnition and electricsGuideline
-
Check swingarm bushes for playRear suspension and frameGuideline
-
Inspect rear shocks for leaks and dampingRear suspension and frameGuideline
-
Lubricate control cables and lever pivotsControls and cablesGuideline
-
Lubricate speedometer / tachometer cables, check driveControls and cablesGuideline
A dry speedo cable whips the needle and eventually kills the instrument.
Every 13,000 km or 2 years
1 item-
Check and adjust valve clearancesEngineGuideline
Every 16,000 km or 2 years
1 item-
Compression test (or leak-down)EngineGuideline
Every 19,500 km or 2 years
3 items-
Replace air filter elementFuel and airGuideline
-
Synchronize throttle bodiesFuel and airGuideline
-
Grease swingarm pivotRear suspension and frameGuideline
Every 24,000 km or 3 years
1 item-
Change fork oilFront endGuideline
Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.
Every 25,500 km or 4 years
1 item-
Replace spark plugsEngineGuideline
Every 29,000 km
1 item-
Replace chain and sprockets (wear based)Final driveGuideline
Every 32,000 km or 4 years
2 items-
Repack / replace steering head bearingsFront endGuideline
Many old machines use loose balls in cups and cones. Taper roller conversions are common.
-
Repack / replace wheel bearingsWheels and tiresGuideline
Cup-and-cone and taper roller hubs need periodic repacking and adjustment.
Every 38,500 km or 4 years
1 item-
Replace fuel filterFuel and airGuideline
Every 40,000 km or 6 years
1 item-
Replace swingarm bushes / bearingsRear suspension and frameGuideline
Every 48,500 km or 6 years
1 item-
Rebuild forks: seals, bushes, springsFront endGuideline
Every 6 months
1 item-
Clean battery terminals, check charge and strapIgnition and electricsGuideline
Every 2 years
3 items-
Inspect wiring, bullet connectors and ground pointsIgnition and electricsGuideline
-
Inspect frame, welds and lugs for cracksRear suspension and frameGuideline
-
Replace brake fluidBrakesGuideline
Every 4 years
3 items-
Replace fuel linesFuel and airGuideline
Old rubber and modern ethanol fuel do not mix well.
-
Inspect brake hoses; replace old rubberBrakesGuideline
-
Rebuild calipers and master cylinders (seals)BrakesGuideline
Every 6 years
2 items-
Replace inner tubes and rim tape with tiresWheels and tiresGuideline
-
Replace tires on age (regardless of tread)Wheels and tiresGuideline
Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.
Keep up with this schedule on your phone
Add the bike in the app and this chart loads itself, ready to log against and edit.