MotoService Log
Suzuki GSX550 / GSX750 / GSX1100 and Katana (air-cooled)
Example photo: Rainmaker47, CC BY-SA 3.0, Wikimedia Commons
Suzuki · Suzuki GS air-cooled four (GS400-GS1100 1976-1988)

GSX550 / GSX750 / GSX1100 and Katana (air-cooled)

Library entry covers 1980-1987

28 factory 32 guideline

Published source

Suzuki Katana 1100 Service Manual (Suzuki Motor Co.), Periodic Maintenance Chart p.2-1

Factory service manual. Covers Katana 1100 (GSX1100S) service manual, US/EPA chart in km, mi and months.

60 items for a 1985 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)
Engine cycle
Four-stroke
Engine lubrication
Wet sump (oil in crankcase)
Oil filtration
Replaceable cartridge or spin-on filter
Valve gear
Overhead cam, shim adjusted (incl. desmo)
Ignition
Electronic (CDI / transistor / ECU)
Charging
Alternator / stator with rectifier
Battery
Wet cell (flooded lead-acid, needs topping up)
Fuel system
Two or more carburetors
Cooling
Air / oil cooled
Primary drive
Gear or chain inside engine, shares engine oil
Gearbox oil
Shares engine oil
Clutch control
Hand lever, cable
Final drive
Chain
Front suspension
Telescopic fork
Rear suspension
Swingarm, twin shocks
Front brake
Disc, hydraulic
Rear brake
Disc, hydraulic
Wheels
Cast / alloy, tubeless
Sidecar
No sidecar
Maintenance schedule

1985 Suzuki GSX550 / GSX750 / GSX1100 and Katana (air-cooled)

On the road: every 300 km

1 item
  • Check engine oil level
    Pre-ride / on the road
    Guideline

    Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 500 km

2 items
  • Check lights, horn, brake light switches
    Pre-ride / on the road
    Guideline
  • Check tire pressures
    Pre-ride / on the road
    Guideline

On the road: every 1,000 km

2 items
  • Check chain slack and rear wheel alignment
    Pre-ride / on the road
    Guideline
  • Lubricate drive chain
    Pre-ride / on the road
    Factory

    Manual: Drive chain: clean and lubricate. Factory: Periodic maintenance chart p.2-1: every 600 mi (1,000 km); inspect at every column

Every 3,000 km

1 item
  • Clean / inspect air filter
    Fuel and air
    Factory

    Manual: Air cleaner: clean. Factory: Periodic maintenance chart p.2-1: clean every 2,000 mi (3,000 km)

Every 5,000 km or 12 months

8 items
  • Check throttle cable(s) free play and return
    Fuel and air
    Guideline
  • Clean fuel tap filter / sediment bowl
    Fuel and air
    Guideline
  • Clean drive chain thoroughly (remove and soak, re-lube)
    Final drive
    Guideline

    Non O-ring chains on old machines: remove, clean, soak in hot chain grease or lube, refit with the master link clip closed end leading.

  • Inspect chain and sprockets for wear (measure stretch)
    Final drive
    Guideline
  • Inspect fork seals, stanchions and fork boots
    Front end
    Guideline
  • Check footrests, pegs, rear brake and gear lever pivots
    Rear suspension and frame
    Guideline
  • Grease and check center / side stand and springs
    Rear suspension and frame
    Guideline
  • Check wheel bearings for play
    Wheels and tires
    Guideline

Every 6,000 km or 12 months

17 items
  • Walk-around: check nuts and bolts for vibration loosening
    Pre-ride / on the road
    Factory

    Manual: Chassis bolts and nuts: tighten. Factory: Periodic maintenance chart p.2-1: T at every column, first at 600 mi

  • Change engine oil
    Engine
    Factory

    Manual: Engine oil: replace. Factory: Periodic maintenance chart p.2-1: R at every column, first at 600 mi

  • Check and adjust valve clearances
    Engine
    Factory

    Manual: Valve clearance: inspect. Factory: Periodic maintenance chart p.2-1: I at every column, first at 600 mi

  • Check cylinder head bolt torque
    Engine
    Factory

    Manual: Cylinder head nuts and exhaust pipe bolts: tighten. Factory: Periodic maintenance chart p.2-1: T at every column, first at 600 mi

  • Inspect, clean and gap spark plugs
    Engine
    Factory

    Manual: Spark plugs: inspect. Factory: Periodic maintenance chart p.2-1: I at 4000 and 11000 mi, R at 7500 and 15000 mi

  • Replace oil filter
    Engine
    Factory

    Manual: Oil filter: replace. Factory: Periodic maintenance chart p.2-1: replaced with the oil at every column, first at 600 mi

  • Fuel line and vapor hose: inspect
    Fuel and air
    Factory

    Factory: Periodic maintenance chart p.2-1 (columns 600 mi/2 months, 4,000 mi/12, 7,500 mi/24, 11,000 mi/36, 15,000 mi/48 months): I at every column, first at 600 mi; replace every four years. (Read from the page image, ManualsLib Suzuki Katana 1100 service manual p.2-1.)

  • Synchronize carburetors
    Fuel and air
    Factory

    Manual: Carburetors (idle rpm): inspect. Factory: Periodic maintenance chart p.2-1: I at every column, first at 600 mi

  • Check battery electrolyte, top up with distilled water
    Ignition and electrics
    Factory

    Manual: Battery: inspect. Factory: Periodic maintenance chart p.2-1: I at 4000/7500/11000/15000 mi columns

  • Clutch fluid: inspect
    Primary and gearbox
    Factory

    Factory: Periodic maintenance chart p.2-1 (columns 600 mi/2 months, 4,000 mi/12, 7,500 mi/24, 11,000 mi/36, 15,000 mi/48 months): I at every column, first at 600 mi; replace every two years. (Read from the page image, ManualsLib Suzuki Katana 1100 service manual p.2-1.)

  • Clutch hose: inspect
    Primary and gearbox
    Factory

    Factory: Periodic maintenance chart p.2-1 (columns 600 mi/2 months, 4,000 mi/12, 7,500 mi/24, 11,000 mi/36, 15,000 mi/48 months): I at every column, first at 600 mi. (Read from the page image, ManualsLib Suzuki Katana 1100 service manual p.2-1.)

  • Drive chain: inspect
    Final drive
    Factory

    Factory: Periodic maintenance chart p.2-1 (columns 600 mi/2 months, 4,000 mi/12, 7,500 mi/24, 11,000 mi/36, 15,000 mi/48 months): I at every column, first at 600 mi; clean and lubricate every 600 mi (1,000 km). (Read from the page image, ManualsLib Suzuki Katana 1100 service manual p.2-1.)

  • Check steering head bearing adjustment
    Front end
    Factory

    Manual: Steering: inspect. Factory: Periodic maintenance chart p.2-1: I at every column, first at 600 mi

  • Brake fluid: inspect
    Brakes
    Factory

    Factory: Periodic maintenance chart p.2-1 (columns 600 mi/2 months, 4,000 mi/12, 7,500 mi/24, 11,000 mi/36, 15,000 mi/48 months): I at every column, first at 600 mi; replace every two years. (Read from the page image, ManualsLib Suzuki Katana 1100 service manual p.2-1.)

  • Brake hoses: inspect
    Brakes
    Factory

    Factory: Periodic maintenance chart p.2-1 (columns 600 mi/2 months, 4,000 mi/12, 7,500 mi/24, 11,000 mi/36, 15,000 mi/48 months): I at every column, first at 600 mi; replace every four years. (Read from the page image, ManualsLib Suzuki Katana 1100 service manual p.2-1.)

  • Check brake pads and discs
    Brakes
    Factory

    Manual: Brakes: inspect. Factory: Periodic maintenance chart p.2-1: I at every column, first at 600 mi

  • Inspect tire tread, sidewalls and date codes
    Wheels and tires
    Factory

    Manual: Tires: inspect. Factory: Periodic maintenance chart p.2-1: I at every column, first at 600 mi

Every 6,500 km or 12 months

1 item
  • Adjust clutch free play, lubricate cable and lever pivot
    Primary and gearbox
    Guideline

Every 9,500 km or 12 months

5 items
  • Clean carburetor float bowl(s), check float level and jets
    Fuel and air
    Guideline

    Ethanol fuel varnishes old carbs quickly in storage.

  • Check charging voltage and regulator / cut-out
    Ignition and electrics
    Guideline
  • Check swingarm bushes for play
    Rear suspension and frame
    Guideline
  • Lubricate control cables and lever pivots
    Controls and cables
    Guideline
  • Lubricate speedometer / tachometer cables, check drive
    Controls and cables
    Guideline

    A dry speedo cable whips the needle and eventually kills the instrument.

Every 12,000 km or 2 years

3 items
  • Replace spark plugs
    Engine
    Factory

    Manual: Spark plugs: replace. Factory: Periodic maintenance chart p.2-1: R at 7500 and 15000 mi columns

  • Change fork oil
    Front end
    Factory

    Manual: Front fork: inspect. Factory: Periodic maintenance chart p.2-1: I at 600, 7500 and 15000 mi

  • Inspect rear shocks for leaks and damping
    Rear suspension and frame
    Factory

    Manual: Rear suspension: inspect. Factory: Periodic maintenance chart p.2-1: I at 600, 7500 and 15000 mi

Every 12,000 km

1 item
  • Replace air filter element
    Fuel and air
    Factory

    Manual: Air cleaner: replace. Factory: Periodic maintenance chart p.2-1: replace every 7,500 mi (12,000 km)

Every 13,000 km or 2 years

1 item
  • Check valve clearances (shim adjusted)
    Engine
    Guideline

Every 16,000 km or 2 years

1 item
  • Compression test (or leak-down)
    Engine
    Guideline

Every 19,500 km or 2 years

1 item
  • Grease swingarm pivot
    Rear suspension and frame
    Guideline

Every 29,000 km

1 item
  • Replace chain and sprockets (wear based)
    Final drive
    Guideline

Every 32,000 km or 4 years

2 items
  • Repack / replace steering head bearings
    Front end
    Guideline

    Many old machines use loose balls in cups and cones. Taper roller conversions are common.

  • Repack / replace wheel bearings
    Wheels and tires
    Guideline

    Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 40,000 km or 6 years

1 item
  • Replace swingarm bushes / bearings
    Rear suspension and frame
    Guideline

Every 48,500 km or 6 years

1 item
  • Rebuild forks: seals, bushes, springs
    Front end
    Guideline

Every 6 months

1 item
  • Clean battery terminals, check charge and strap
    Ignition and electrics
    Guideline

Every 12 months

1 item
  • Check speedometer / odometer against a known distance
    Controls and cables
    Guideline

    Old speedos drift with tire size and drive wear. Use phone GPS over a measured 10 miles / km.

Every 2 years

4 items
  • Inspect wiring, bullet connectors and ground points
    Ignition and electrics
    Guideline
  • Replace hydraulic clutch fluid
    Primary and gearbox
    Factory

    Manual: Clutch fluid: replace. Factory: Periodic maintenance chart p.2-1: replace every two years; clutch hose replaced every four years; both inspected at every column

  • Inspect frame, welds and lugs for cracks
    Rear suspension and frame
    Guideline
  • Replace brake fluid
    Brakes
    Factory

    Manual: Brake fluid: replace. Factory: Periodic maintenance chart p.2-1: replace every two years; inspect at every column, first at 600 mi

Every 4 years

4 items
  • Replace fuel lines
    Fuel and air
    Factory

    Manual: Fuel line and vapor hose: replace. Factory: Periodic maintenance chart p.2-1: replace every four years; inspect at every column, first at 600 mi

  • Clutch hose: replace
    Primary and gearbox
    Factory

    Factory: Periodic maintenance chart p.2-1 (columns 600 mi/2 months, 4,000 mi/12, 7,500 mi/24, 11,000 mi/36, 15,000 mi/48 months): replace every four years. (Read from the page image, ManualsLib Suzuki Katana 1100 service manual p.2-1.)

  • Inspect brake hoses; replace old rubber
    Brakes
    Factory

    Manual: Brake hoses: replace. Factory: Periodic maintenance chart p.2-1: replace every four years; inspect at every column, first at 600 mi

  • Rebuild calipers and master cylinders (seals)
    Brakes
    Guideline

Every 6 years

1 item
  • Replace tires on age (regardless of tread)
    Wheels and tires
    Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.

Keep up with this schedule on your phone

Add the bike in the app and this chart loads itself, ready to log against and edit.

Coming soon to Google Play

Other 1985 Suzuki models

All 1985 Suzuki