MotoService Log
No photo of this model in the library yet.
Suzuki · Shim-adjusted overhead-cam four-stroke, wet sump, gearbox shares engine oil, chain drive

Hayabusa (GSX1300RR, 3rd gen)

Library entry covers 2022-2026

29 factory 27 guideline

Published source

Suzuki GSX1300RRQ Hayabusa Manual do Proprietário 99011-10L00-057 (J.Toledo Suzuki Brazil, 2022), Calendário de Manutenção p. 124

Factory owner's handbook. Covers 2022- (GSX1300RRQ owner's manual; km, miles and months).

56 items for a 2026 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)
Engine cycle
Four-stroke
Engine lubrication
Wet sump (oil in crankcase)
Oil filtration
Replaceable cartridge or spin-on filter
Valve gear
Overhead cam, shim adjusted (incl. desmo)
Ignition
Electronic (CDI / transistor / ECU)
Charging
Alternator / stator with rectifier
Battery
Wet cell (flooded lead-acid, needs topping up)
Fuel system
Fuel injection
Cooling
Liquid cooled
Primary drive
Gear or chain inside engine, shares engine oil
Gearbox oil
Shares engine oil
Clutch control
Hand lever, hydraulic
Final drive
Chain
Front suspension
Telescopic fork
Rear suspension
Swingarm, single shock / cantilever
Front brake
Disc, hydraulic
Rear brake
Disc, hydraulic
Wheels
Cast / alloy, tubeless
Sidecar
No sidecar
Maintenance schedule

2026 Suzuki Hayabusa (GSX1300RR, 3rd gen)

On the road: every 200 mi

1 item
  • Check engine oil level
    Pre-ride / on the road
    Guideline

    Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 300 mi

2 items
  • Check lights, horn, brake light switches
    Pre-ride / on the road
    Guideline
  • Check tire pressures
    Pre-ride / on the road
    Guideline

On the road: every 500 mi

1 item
  • Check coolant level
    Pre-ride / on the road
    Guideline

On the road: every 600 mi

1 item
  • Lubricate drive chain
    Pre-ride / on the road
    Factory

    Manual: Corrente de transmissão - limpar e lubrificar. Factory: Clean and lubricate every 1000 km (600 milhas)

On the road: every 3,750 mi or 12 months

1 item
  • Check chain slack and rear wheel alignment
    Pre-ride / on the road
    Factory

    Manual: Corrente de transmissão - I. Factory: Initial 1000 km; then every column

Every 600 mi

1 item
  • Lubricate control cables and lever pivots
    Controls and cables
    Factory

    Manual: Lubrificação. Factory: Lubricate every 1000 km (600 milhas)

Every 3,000 mi or 12 months

5 items
  • Clean drive chain thoroughly (remove and soak, re-lube)
    Final drive
    Guideline

    Non O-ring chains on old machines: remove, clean, soak in hot chain grease or lube, refit with the master link clip closed end leading.

  • Inspect chain and sprockets for wear (measure stretch)
    Final drive
    Guideline
  • Check footrests, pegs, rear brake and gear lever pivots
    Rear suspension and frame
    Guideline
  • Grease and check center / side stand and springs
    Rear suspension and frame
    Guideline
  • Check wheel bearings for play
    Wheels and tires
    Guideline

Every 3,750 mi or 12 months

8 items
  • Change engine oil
    Engine
    Factory

    Manual: Óleo do motor - S (substituir). Factory: Initial 1000 km/600 mi/2 months; columns 1000/6000/12 000/18 000/24 000 km

  • Inspect coolant hoses and clamps
    Engine
    Factory

    Manual: Tubagem do radiador - I. Factory: Every column from 6000 km

  • Inspect, clean and gap spark plugs
    Engine
    Factory

    Manual: Velas - I. Factory: Inspected at 6000 and 18 000 km

  • Parafusos e porcas do chassis - A
    Engine
    Factory

    Factory: Tighten initially, then every column

  • Check throttle cable(s) free play and return
    Fuel and air
    Factory

    Manual: Folga do cabo do acelerador - I. Factory: Initial 1000 km; then every column

  • Clean / inspect air filter
    Fuel and air
    Factory

    Manual: Elemento do filtro de ar - I. Factory: Inspected at 6000, 12 000 and 24 000 km

  • Check brake pads and discs
    Brakes
    Factory

    Manual: Freios - I. Factory: Initial 1000 km; then every column

  • Inspect tire tread, sidewalls and date codes
    Wheels and tires
    Factory

    Manual: Pneus - I. Factory: Every column from 6000 km

Every 3,750 mi or 2 years

2 items
  • Replace hydraulic clutch fluid
    Primary and gearbox
    Factory

    Manual: Fluido da embraiagem - substituir todos os 2 anos. Factory: Inspect every column from 6000 km; replace every 2 years

  • Replace brake fluid
    Brakes
    Factory

    Manual: Fluido dos freios - substituir todos os 2 anos. Factory: Inspect every column from 6000 km; replace every 2 years

Every 3,750 mi or 4 years

3 items
  • Tubo da embreagem - substituir todos os 4 anos
    Engine
    Factory

    Factory: Inspect every column from 6000 km; replace every 4 years

  • Replace fuel lines
    Fuel and air
    Factory

    Manual: Tubagem do combustível - I; substituir todos os 4 anos. Factory: Inspect every column from 6000 km; replace every 4 years

  • Inspect brake hoses; replace old rubber
    Brakes
    Factory

    Manual: Tubos dos freios - substituir todos os 4 anos. Factory: Inspect every column from 6000 km; replace every 4 years

Every 6,000 mi or 12 months

3 items
  • Check charging voltage and regulator / cut-out
    Ignition and electrics
    Guideline
  • Check swingarm bushes for play
    Rear suspension and frame
    Guideline
  • Lubricate speedometer / tachometer cables, check drive
    Controls and cables
    Guideline

    A dry speedo cable whips the needle and eventually kills the instrument.

Every 7,500 mi or 2 years

9 items
  • Limpeza da rampa de aceleração (throttle body cleaning)
    Engine
    Factory

    Factory: Marked at 12 000 and 24 000 km

  • Parafusos do coletor de escape e do silenciador - A (apertar)
    Engine
    Factory

    Factory: Tighten at 1000, 12 000, 24 000 km

  • Replace spark plugs
    Engine
    Factory

    Manual: Velas - S. Factory: Replaced at 12 000 and 24 000 km

  • Sistema PAIR (alimentação de ar) - I
    Engine
    Factory

    Factory: Marked at 12 000 and 24 000 km

  • Synchronize throttle bodies
    Fuel and air
    Factory

    Manual: Sincronização das válvulas de aceleração - I. Factory: Marked at 12 000 and 24 000 km

  • Check steering head bearing adjustment
    Front end
    Factory

    Manual: Direção - I. Factory: Initial 1000 km; then 12 000 and 24 000 km

  • Inspect fork seals, stanchions and fork boots
    Front end
    Factory

    Manual: Forquilha dianteira - I. Factory: Marked at 12 000 and 24 000 km

  • Inspect rear shocks for leaks and damping
    Rear suspension and frame
    Factory

    Manual: Suspensão traseira - I. Factory: Marked at 12 000 and 24 000 km

  • Sistema de controlo de emissões por evaporação - I
    Controls and cables
    Factory

    Factory: Marked at 12 000 and 24 000 km (if equipped)

Every 10,000 mi or 2 years

1 item
  • Compression test (or leak-down)
    Engine
    Guideline

Every 11,250 mi or 3 years

2 items
  • Replace oil filter
    Engine
    Factory

    Manual: Filtro do óleo do motor - S. Factory: Initial 1000 km; next at 18 000 km (11 250 mi)

  • Replace air filter element
    Fuel and air
    Factory

    Manual: Elemento do filtro de ar - S. Factory: S printed only at 18 000 km (11 250 mi)

Every 12,000 mi or 2 years

2 items
  • Clean and grease rear suspension linkage
    Rear suspension and frame
    Guideline
  • Grease swingarm pivot
    Rear suspension and frame
    Guideline

Every 15,000 mi or 3 years

1 item
  • Change fork oil
    Front end
    Guideline

    Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 15,000 mi or 4 years

1 item
  • Check valve clearances (shim adjusted)
    Engine
    Factory

    Manual: Folga das válvulas - I. Factory: Marked only at 24 000 km (15 000 mi)

Every 18,000 mi

1 item
  • Replace chain and sprockets (wear based)
    Final drive
    Guideline

Every 20,000 mi or 4 years

2 items
  • Repack / replace steering head bearings
    Front end
    Guideline

    Many old machines use loose balls in cups and cones. Taper roller conversions are common.

  • Repack / replace wheel bearings
    Wheels and tires
    Guideline

    Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 24,000 mi or 4 years

1 item
  • Replace fuel filter
    Fuel and air
    Guideline

Every 25,000 mi or 6 years

1 item
  • Replace swingarm bushes / bearings
    Rear suspension and frame
    Guideline

Every 30,000 mi or 4 years

1 item
  • Replace coolant
    Engine
    Factory

    Manual: Líquido de refrigeração SUZUKI SUPER LONG LIFE COOLANT (azul) - substituir. Factory: Every 4 years or 48 000 km (30 000 miles); other coolant S at 12 000/24 000 km

Every 30,000 mi or 6 years

1 item
  • Rebuild forks: seals, bushes, springs
    Front end
    Guideline

Every 6 months

1 item
  • Clean battery terminals, check charge and strap
    Ignition and electrics
    Guideline

Every 2 years

2 items
  • Inspect wiring, bullet connectors and ground points
    Ignition and electrics
    Guideline
  • Inspect frame, welds and lugs for cracks
    Rear suspension and frame
    Guideline

Every 4 years

1 item
  • Rebuild calipers and master cylinders (seals)
    Brakes
    Guideline

Every 6 years

1 item
  • Replace tires on age (regardless of tread)
    Wheels and tires
    Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.

Keep up with this schedule on your phone

Add the bike in the app and this chart loads itself, ready to log against and edit.

Coming soon to Google Play

Other 2026 Suzuki models

All 2026 Suzuki