MotoService Log
No photo of this model in the library yet.

Have this bike? Send a photo or the manual's service chart

SWM · Overhead-cam four-stroke single, dry sump, gearbox shares engine oil, chain drive

SM 500 R

Library entry covers 2016-2024

66 factory 51 guideline

Published source

SWM SM 500 R E4 2018 Manual (Use, Maintenance), Appendix A scheduled maintenance chart pp.A-2 to A-8 (ManualsLib.mx 221410)

Factory source. Covers SWM SM 500 R E4 2018 manual (cover prints SM 500 R E4 2018; chart headed SM 500R); one model-year edition for the 2016-2024 row.

117 items for a 2017 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)
Engine cycle
Four-stroke
Engine lubrication
Dry sump (separate oil tank)
Oil filtration
Replaceable cartridge or spin-on filter
Valve gear
Overhead cam, screw/locknut adjusters
Ignition
Electronic (CDI / transistor / ECU)
Charging
Alternator / stator with rectifier
Battery
Wet cell (flooded lead-acid, needs topping up)
Fuel system
Fuel injection
Cooling
Liquid cooled
Primary drive
Gear or chain inside engine, shares engine oil
Gearbox oil
Shares engine oil
Clutch control
Hand lever, cable
Final drive
Chain
Front suspension
Telescopic fork
Rear suspension
Swingarm, twin shocks
Front brake
Disc, hydraulic
Rear brake
Disc, hydraulic
Wheels
Spoked, tubed
Sidecar
No sidecar
Maintenance schedule

2017 SWM SM 500 R

On the road: every 300 km

1 item
  • Check engine oil level
    Pre-ride / on the road
    Guideline

    Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 500 km

3 items
  • Check lights, horn, brake light switches
    Pre-ride / on the road
    Guideline
  • Check tire pressures
    Pre-ride / on the road
    Guideline
  • Lubricate drive chain
    Pre-ride / on the road
    Guideline

    Lube warm, ideally at the end of the riding day so it soaks in overnight. Sooner after rain.

On the road: every 800 km

1 item
  • Check coolant level
    Pre-ride / on the road
    Guideline

On the road: every 1,000 km

1 item
  • Check chain slack and rear wheel alignment
    Pre-ride / on the road
    Guideline

Every 500 km

9 items
  • Bolts and nuts (general tightness check)
    Engine
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): C in the every 500 km and every 4,000 km columns. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Engine oil (replace)
    Engine
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): S in the every 500 km and every 2,000 km columns. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Handlebar holders and fastenings (check)
    Engine
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): C in the every 500 km and every 4,000 km columns. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Oil filter cartridge and net oil filter (replace, clean)
    Engine
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): S, P in the every 500 km and every 2,000 km columns. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Rear driven sprocket screws (check tightness)
    Engine
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): C in the every 500 km and every 2,000 km columns. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Valve clearance (check)
    Engine
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): C (clearance) in the every 500 km and every 4,000 km columns. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Rear transmission chain (check, lubricate)
    Final drive
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): C, L every 500 km. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Subframe and engine fastening bolts (check)
    Rear suspension and frame
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): C in the every 500 km and every 4,000 km columns. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Wheel spoke tension (check)
    Wheels and tires
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): C in the every 500 km and every 2,000 km columns. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

Every 1,600 km or 6 months

1 item
  • Inspect tire tread, sidewalls and date codes
    Wheels and tires
    Guideline

Every 2,000 km

14 items
  • Drive sprocket (replace)
    Engine
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): S every 2,000 km; replace if necessary. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Exhaust muffler packing (replace)
    Engine
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): S every 2,000 km; replace if necessary. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Footrests, pins and springs (check)
    Engine
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): C every 2,000 km; replace if necessary. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Intake manifold (check)
    Engine
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): C every 2,000 km. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Rear driven sprocket (replace)
    Engine
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): S every 2,000 km; replace if necessary. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Spark plug (clean)
    Engine
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): P every 2,000 km. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Clutch discs (check)
    Primary and gearbox
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): C every 2,000 km; replace if necessary. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Rear transmission chain (replace)
    Final drive
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): S every 2,000 km; replace if necessary. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Front fork (overhaul)
    Front end
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): R every 2,000 km. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Steering head and steering crown with pin (lubricate)
    Front end
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): L every 2,000 km. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Rear swingarm pivot needle bearings (lubricate)
    Rear suspension and frame
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): L every 2,000 km. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Front brake disc (check)
    Brakes
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): C every 2,000 km; replace if necessary. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Rear brake disc (check)
    Brakes
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): C every 2,000 km; replace if necessary. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Gear control pedal (check)
    Controls and cables
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): C every 2,000 km. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

Every 4,000 km

7 items
  • Rear suspension link bushings (check)
    Engine
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): C every 4,000 km. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Spark plug (replace)
    Engine
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): S every 4,000 km. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Clutch hub (check)
    Primary and gearbox
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): C every 4,000 km; replace if necessary. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Primary drive gear set (check)
    Primary and gearbox
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): C every 4,000 km. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Rear chain slider (check)
    Final drive
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): C every 4,000 km; replace if necessary. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Rear swingarm bushing (check)
    Rear suspension and frame
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): C every 4,000 km. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Throttle and starting decompressor cables (lubricate)
    Controls and cables
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): L every 4,000 km; replace if necessary. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

Every 5,000 km or 12 months

10 items
  • Check throttle cable(s) free play and return
    Fuel and air
    Guideline
  • Clean drive chain thoroughly (remove and soak, re-lube)
    Final drive
    Guideline

    Non O-ring chains on old machines: remove, clean, soak in hot chain grease or lube, refit with the master link clip closed end leading.

  • Inspect chain and sprockets for wear (measure stretch)
    Final drive
    Guideline
  • Check steering head bearing adjustment
    Front end
    Guideline
  • Inspect fork seals, stanchions and fork boots
    Front end
    Guideline
  • Check footrests, pegs, rear brake and gear lever pivots
    Rear suspension and frame
    Guideline
  • Grease and check center / side stand and springs
    Rear suspension and frame
    Guideline
  • Check brake pads and discs
    Brakes
    Guideline
  • Check spoke tension and wheel true
    Wheels and tires
    Guideline
  • Check wheel bearings for play
    Wheels and tires
    Guideline

Every 6,500 km or 12 months

2 items
  • Inspect, clean and gap spark plugs
    Engine
    Guideline
  • Adjust clutch free play, lubricate cable and lever pivot
    Primary and gearbox
    Guideline

Every 8,000 km or 12 months

2 items
  • Change engine oil
    Engine
    Guideline

    Pre-1970 machines: many owners run non-detergent or classic-spec oil with no filter, so short intervals matter. Dry sump: drain the tank and the crankcase/sump, flush the tank and clean the feed and return screens.

  • Replace oil filter
    Engine
    Guideline

Every 8,000 km

13 items
  • Intake manifold (replace)
    Engine
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): S every 8,000 km. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Oil pump (check)
    Engine
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): C every 8,000 km. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Piston assembly (check)
    Engine
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): C every 8,000 km. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Starter decompressor system (check)
    Engine
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): C every 8,000 km; replace if necessary. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Starting gears (check)
    Engine
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): C every 8,000 km; replace if necessary. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Valve timing drive gear (check)
    Ignition and electrics
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): C every 8,000 km; replace if necessary. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Clutch discs (replace)
    Primary and gearbox
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): S every 8,000 km. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Clutch disengagement rod (check)
    Primary and gearbox
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): C every 8,000 km. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Clutch housing (check)
    Primary and gearbox
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): C every 8,000 km. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Clutch pressure plate (check)
    Primary and gearbox
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): C every 8,000 km. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Clutch springs (check)
    Primary and gearbox
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): C every 8,000 km; replace if necessary. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Valve timing chain (check)
    Final drive
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): C every 8,000 km. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Wheel hub bearings (replace)
    Wheels and tires
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): S every 8,000 km; replace if necessary. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

Every 9,500 km or 12 months

7 items
  • Inspect coolant hoses and clamps
    Engine
    Guideline
  • Clean / inspect air filter
    Fuel and air
    Guideline

    Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.

  • Check charging voltage and regulator / cut-out
    Ignition and electrics
    Guideline
  • Check swingarm bushes for play
    Rear suspension and frame
    Guideline
  • Inspect rear shocks for leaks and damping
    Rear suspension and frame
    Guideline
  • Lubricate control cables and lever pivots
    Controls and cables
    Guideline
  • Lubricate speedometer / tachometer cables, check drive
    Controls and cables
    Guideline

    A dry speedo cable whips the needle and eventually kills the instrument.

Every 10,000 km

19 items
  • Camshaft (check)
    Engine
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): C every 10,000 km. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Connecting rod assembly (replace)
    Engine
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): S every 10,000 km. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Crankcase bearings (replace)
    Engine
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): S every 10,000 km. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Cylinder assembly (check)
    Engine
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): C every 10,000 km; replace if necessary. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Intake and exhaust rocker arms (check)
    Engine
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): C every 10,000 km; replace if necessary. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Oil pump to crankcase hose (check)
    Engine
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): C every 10,000 km. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Piston assembly (replace)
    Engine
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): S every 10,000 km. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Valve cups and half cones (check)
    Engine
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): C every 10,000 km; replace if necessary. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Valve springs (check)
    Engine
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): C every 10,000 km; replace if necessary. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Valves (replace; refer to workshop manual)
    Engine
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): S (#) every 10,000 km. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Fuel hoses (replace)
    Fuel and air
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): S every 10,000 km; replace if necessary. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Valve timing driven gear (check)
    Ignition and electrics
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): C every 10,000 km; replace if necessary. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Clutch control assembly (overhaul; refer to workshop manual)
    Primary and gearbox
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): R (#) every 10,000 km. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Valve timing chain (replace)
    Final drive
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): S every 10,000 km. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Valve timing chain slider (replace)
    Final drive
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): S every 10,000 km. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Valve timing chain tensioner (check)
    Final drive
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): C every 10,000 km. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Rear shock absorber (overhaul)
    Rear suspension and frame
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): R every 10,000 km. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Front brake fluid (replace)
    Brakes
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): S every 10,000 km. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Rear brake fluid (replace)
    Brakes
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): S every 10,000 km. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

Every 13,000 km or 2 years

1 item
  • Check and adjust valve clearances
    Engine
    Guideline

Every 16,000 km or 2 years

1 item
  • Compression test (or leak-down)
    Engine
    Guideline

Every 19,500 km or 2 years

3 items
  • Replace air filter element
    Fuel and air
    Guideline
  • Synchronize throttle bodies
    Fuel and air
    Guideline
  • Grease swingarm pivot
    Rear suspension and frame
    Guideline

Every 24,000 km or 3 years

1 item
  • Change fork oil
    Front end
    Guideline

    Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 25,500 km or 4 years

1 item
  • Replace spark plugs
    Engine
    Guideline

Every 29,000 km

1 item
  • Replace chain and sprockets (wear based)
    Final drive
    Guideline

Every 32,000 km or 4 years

2 items
  • Repack / replace steering head bearings
    Front end
    Guideline

    Many old machines use loose balls in cups and cones. Taper roller conversions are common.

  • Repack / replace wheel bearings
    Wheels and tires
    Guideline

    Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 38,500 km or 4 years

1 item
  • Replace fuel filter
    Fuel and air
    Guideline

Every 40,000 km or 6 years

1 item
  • Replace swingarm bushes / bearings
    Rear suspension and frame
    Guideline

Every 48,500 km or 6 years

1 item
  • Rebuild forks: seals, bushes, springs
    Front end
    Guideline

Every 6 months

1 item
  • Clean battery terminals, check charge and strap
    Ignition and electrics
    Guideline

Every 2 years

4 items
  • Replace coolant
    Engine
    Guideline
  • Inspect wiring, bullet connectors and ground points
    Ignition and electrics
    Guideline
  • Inspect frame, welds and lugs for cracks
    Rear suspension and frame
    Guideline
  • Replace brake fluid
    Brakes
    Guideline

Every 4 years

3 items
  • Replace fuel lines
    Fuel and air
    Guideline

    Old rubber and modern ethanol fuel do not mix well.

  • Inspect brake hoses; replace old rubber
    Brakes
    Guideline
  • Rebuild calipers and master cylinders (seals)
    Brakes
    Guideline

Every 6 years

2 items
  • Replace inner tubes and rim tape with tires
    Wheels and tires
    Guideline
  • Replace tires on age (regardless of tread)
    Wheels and tires
    Guideline

No interval set

4 items
  • Coolant (replace if necessary)
    Engine
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): replace if necessary column only. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Exhaust pipe and muffler (replace if necessary)
    Engine
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): replace if necessary column only. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Rear chain guide and chain guard (replace if necessary)
    Final drive
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): replace if necessary column only. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

  • Brake pads (replace if necessary)
    Brakes
    Factory

    Factory: Scheduled maintenance chart, to be carried out at the SWM dealer (SWM SM 500 R E4 2018 manual, Appendix A, printed pp.A-2 to A-8, chart headed SM 500R): replace if necessary column only. Columns as printed: coupon every 500 km; every 2,000 km; every 4,000 km; every 8,000 km; every 10,000 km; replace if necessary. Key: S replacement; C check; P cleaning; R overhaul; L greasing/lubrication; # refer to the workshop manual. Notes: replace all gaskets at every removal; replace screws and nuts if worn; do a general check after racing use and after muddy or sandy ground.

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.

Keep up with this schedule on your phone

Add the bike in the app and this chart loads itself, ready to log against and edit.

Coming soon to Google Play

Other 2017 SWM models

All 2017 SWM
2016-2021
RS 125 R
Factory
2016-2025
RS 300 R
Guideline
2016-2020
RS 500 R
Factory
2016-2025
SM 125 R
Guideline
2016-2025
SuperDual
Factory
2017-2025
Gran Turismo
Guideline