No photo of this model in the library yet.

SYM · Modern air-cooled single (2000-)

Joyride 125

Library entry covers 2007-2024

30 factory 36 guideline

Published source

SANYANG (SYM) Joyride 125/150/200 Service Manual, Periodical Maintenance Schedule p.2-2 (factory PDF, copy on archive.org)

Factory workshop manual. Covers Joyride 125/150/200 (carburetor era) service manual.

Open the source

66 items for a 2012 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)

Engine cycle: Four-stroke
Engine lubrication: Wet sump (oil in crankcase)
Oil filtration: Replaceable cartridge or spin-on filter
Valve gear: Overhead cam, screw/locknut adjusters
Ignition: Electronic (CDI / transistor / ECU)
Charging: Alternator / stator with rectifier
Battery: Wet cell (flooded lead-acid, needs topping up)
Fuel system: Fuel injection
Cooling: Air / oil cooled
Primary drive: Gear or chain inside engine, shares engine oil
Gearbox oil: Shares engine oil
Clutch control: Hand lever, cable
Final drive: Chain
Front suspension: Telescopic fork
Rear suspension: Swingarm, twin shocks
Front brake: Disc, hydraulic
Rear brake: Drum (or band / belt rim)
Wheels: Spoked, tubed
Sidecar: No sidecar

Maintenance schedule

2012 SYM Joyride 125

On the road: every 200 mi

1 item

Check engine oil level

Pre-ride / on the road

Guideline

Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 300 mi

2 items

Check lights, horn, brake light switches

Pre-ride / on the road

Guideline
Lubricate drive chain

Pre-ride / on the road

Guideline

Lube warm, ideally at the end of the riding day so it soaks in overnight. Sooner after rain.

On the road: every 600 mi

1 item

Check chain slack and rear wheel alignment

Pre-ride / on the road

Guideline

On the road: every 621 mi or 1 month

1 item

Check tire pressures

Pre-ride / on the road

Factory

Manual: Tire pressure. Factory: I every 1000 km.

Every 621 mi or 1 month

5 items

Every screw tightening check

Engine

Factory

Factory: I every 1000 km.
Inspect coolant hoses and clamps

Engine

Factory

Manual: Lines & connections in cooling system. Factory: I every 1000 km.
Check / set ignition timing

Ignition and electrics

Factory

Manual: Ignition timing. Factory: I every 1000 km.
Clean battery terminals, check charge and strap

Ignition and electrics

Factory

Manual: Battery inspection. Factory: I every 1000 km.
Check brake pads and discs

Brakes

Factory

Manual: Brake & free play check. Factory: I every 1000 km.

Every 621 mi

1 item

Change engine oil

Engine

Factory

Manual: Engine oil change. Factory: R at 300 km; replacement for every 1000 km.

Every 1,000 mi or 6 months

2 items

Adjust rear drum brake and rod / cable linkage

Brakes

Guideline
Inspect tire tread, sidewalls and date codes

Wheels and tires

Guideline

Every 1,243 mi

1 item

Crankcase blow-by over-flow pipe

Engine

Factory

Factory: Replacement for every 2000 km.

Every 1,864 mi or 3 months

9 items

Check and adjust valve clearances

Engine

Factory

Manual: Valve clearance. Factory: I at 300 km; A every 3000 km.
Check engine breather and oil return

Engine

Factory

Manual: Crankcase evaporative control system. Factory: C every 3000 km.
Check engine mounting bolts and plates

Engine

Factory

Manual: Engine bolt tightening. Factory: I every 3000 km.
Inspect, clean and gap spark plugs

Engine

Factory

Manual: Spark plug check or change. Factory: I at 300 km and every 3000 km.
Check throttle cable(s) free play and return

Fuel and air

Factory

Manual: Throttle operation. Factory: I every 3000 km.
Clean / inspect air filter

Fuel and air

Factory

Manual: Air cleaner. Factory: C every 3000 km column. Cols 300; 1k/1mo; 3k/3mo; 6k/6mo; 12k/1yr; 14.5k/15mo.
Replace fuel lines

Fuel and air

Factory

Manual: Fuel lines. Factory: I every 3000 km.
Cam chain

Final drive

Factory

Factory: I every 3000 km.
Inspect rear shocks for leaks and damping

Rear suspension and frame

Factory

Manual: Shock absorbers. Factory: I every 3000 km.

Every 3,000 mi or 12 months

6 items

Clean drive chain thoroughly (remove and soak, re-lube)

Final drive

Guideline

Non O-ring chains on old machines: remove, clean, soak in hot chain grease or lube, refit with the master link clip closed end leading.
Inspect chain and sprockets for wear (measure stretch)

Final drive

Guideline
Inspect fork seals, stanchions and fork boots

Front end

Guideline
Check footrests, pegs, rear brake and gear lever pivots

Rear suspension and frame

Guideline
Check spoke tension and wheel true

Wheels and tires

Guideline
Check wheel bearings for play

Wheels and tires

Guideline

Every 3,107 mi

1 item

Change final drive (rear drive) oil

Final drive

Factory

Manual: Gear oil change. Factory: R at 300 km; replacement for every 5000 km.

Every 3,728 mi or 6 months

7 items

CVT driving device (roller)

Engine

Factory

Factory: C every 6000 km.
Clean oil strainers / mesh screens

Engine

Factory

Manual: Oil filter. Factory: C at 300 km and every 6000 km.
Replace spark plugs

Engine

Factory

Manual: Spark plug check or change. Factory: R every 6000 km.
Inspect drive belt, pulleys and tension

Final drive

Factory

Manual: CVT driving device (belt). Factory: I every 6000 km.
Check steering head bearing adjustment

Front end

Factory

Manual: Steering handle check. Factory: I every 6000 km.
Frame lubrication

Rear suspension and frame

Factory

Factory: L every 6000 km.
Grease and check center / side stand and springs

Rear suspension and frame

Factory

Manual: Main/side stands & springs. Factory: I every 6000 km.

Every 4,000 mi or 12 months

2 items

Adjust clutch free play, lubricate cable and lever pivot

Primary and gearbox

Guideline
Lubricate brake cam spindles, check linings and drums

Brakes

Guideline

Every 5,000 mi or 12 months

1 item

Replace oil filter

Engine

Guideline

Every 6,000 mi or 12 months

4 items

Check charging voltage and regulator / cut-out

Ignition and electrics

Guideline
Check swingarm bushes for play

Rear suspension and frame

Guideline
Lubricate control cables and lever pivots

Controls and cables

Guideline
Lubricate speedometer / tachometer cables, check drive

Controls and cables

Guideline

A dry speedo cable whips the needle and eventually kills the instrument.

Every 7,456 mi or 12 months

4 items

2nd air jet cleaner

Engine

Factory

Factory: C every 3000 km; R every 12000 km.
Replace air filter element

Fuel and air

Factory

Manual: Air cleaner. Factory: R in every 12000 km / 1 year column.
Replace fuel filter

Fuel and air

Factory

Manual: Fuel filter. Factory: I every 6000 km; R every 12000 km.
Replace drive belt (wear or damage based)

Final drive

Factory

Manual: CVT driving device (belt). Factory: R every 12000 km / 1 year.

Every 10,000 mi or 2 years

1 item

Compression test (or leak-down)

Engine

Guideline

Every 12,000 mi or 2 years

2 items

Synchronize throttle bodies

Fuel and air

Guideline
Grease swingarm pivot

Rear suspension and frame

Guideline

Every 15,000 mi or 3 years

1 item

Change fork oil

Front end

Guideline

Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 15,000 mi

1 item

Replace brake linings / skim drums (wear based)

Brakes

Guideline

Every 18,000 mi

1 item

Replace chain and sprockets (wear based)

Final drive

Guideline

Every 20,000 mi or 4 years

2 items

Repack / replace steering head bearings

Front end

Guideline

Many old machines use loose balls in cups and cones. Taper roller conversions are common.
Repack / replace wheel bearings

Wheels and tires

Guideline

Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 25,000 mi or 6 years

1 item

Replace swingarm bushes / bearings

Rear suspension and frame

Guideline

Every 30,000 mi or 6 years

1 item

Rebuild forks: seals, bushes, springs

Front end

Guideline

Every 12 months

1 item

Replace coolant

Engine

Factory

Manual: Coolant. Factory: Replacement for every 1 year.

Every 2 years

3 items

Inspect wiring, bullet connectors and ground points

Ignition and electrics

Guideline
Inspect frame, welds and lugs for cracks

Rear suspension and frame

Guideline
Replace brake fluid

Brakes

Guideline

Every 4 years

2 items

Inspect brake hoses; replace old rubber

Brakes

Guideline
Rebuild calipers and master cylinders (seals)

Brakes

Guideline

Every 6 years

2 items

Replace inner tubes and rim tape with tires

Wheels and tires

Guideline
Replace tires on age (regardless of tread)

Wheels and tires

Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.