No photo of this model in the library yet.

Have this bike? Send a photo or the manual's service chart

Triumph · Shim-adjusted overhead-cam four-stroke, wet sump, gearbox shares engine oil, shaft drive

Rocket 3 R

Library entry covers 2020-2025

44 factory 48 guideline

Published source

Triumph Rocket 3 R / Rocket 3 GT Owner's Handbook (3855646-US), scheduled maintenance table (ManualsLib viewer pp.121-122)

Factory source. Covers Triumph Owner's Handbook Rocket 3 R and Rocket 3 GT, copyright 01.2020, part 3855646-US issue 1; later years of the 2020-2025 row not compared.

92 items for a 2025 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)

Engine cycle: Four-stroke
Engine lubrication: Wet sump (oil in crankcase)
Oil filtration: Replaceable cartridge or spin-on filter
Valve gear: Overhead cam, shim adjusted (incl. desmo)
Ignition: Electronic (CDI / transistor / ECU)
Charging: Alternator / stator with rectifier
Battery: Wet cell (flooded lead-acid, needs topping up)
Fuel system: Fuel injection
Cooling: Liquid cooled
Primary drive: Gear or chain inside engine, shares engine oil
Gearbox oil: Shares engine oil
Clutch control: Hand lever, hydraulic
Final drive: Shaft
Front suspension: Telescopic fork
Rear suspension: Swingarm, single shock / cantilever
Front brake: Disc, hydraulic
Rear brake: Disc, hydraulic
Wheels: Cast / alloy, tubeless
Sidecar: No sidecar

Maintenance schedule

2025 Triumph Rocket 3 R

On the road: every 300 km

1 item

Check engine oil level

Pre-ride / on the road

Guideline

Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 500 km

2 items

Check lights, horn, brake light switches

Pre-ride / on the road

Guideline
Check tire pressures

Pre-ride / on the road

Guideline

On the road: every 800 km

1 item

Check coolant level

Pre-ride / on the road

Guideline

Every 1,600 km or 6 months

1 item

Inspect tire tread, sidewalls and date codes

Wheels and tires

Guideline

Every 5,000 km or 12 months

7 items

Check throttle cable(s) free play and return

Fuel and air

Guideline
Check steering head bearing adjustment

Front end

Guideline
Inspect fork seals, stanchions and fork boots

Front end

Guideline
Check footrests, pegs, rear brake and gear lever pivots

Rear suspension and frame

Guideline
Grease and check center / side stand and springs

Rear suspension and frame

Guideline
Check brake pads and discs

Brakes

Guideline
Check wheel bearings for play

Wheels and tires

Guideline

Every 6,500 km or 12 months

1 item

Inspect, clean and gap spark plugs

Engine

Guideline

Every 8,000 km or 12 months

2 items

Change engine oil

Engine

Guideline

Pre-1970 machines: many owners run non-detergent or classic-spec oil with no filter, so short intervals matter. Dry sump: drain the tank and the crankcase/sump, flush the tank and clean the feed and return screens.
Replace oil filter

Engine

Guideline

Every 9,500 km or 12 months

8 items

Inspect coolant hoses and clamps

Engine

Guideline
Clean / inspect air filter

Fuel and air

Guideline

Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
Check charging voltage and regulator / cut-out

Ignition and electrics

Guideline
Check final drive for leaks and bearing play

Final drive

Guideline
Check swingarm bushes for play

Rear suspension and frame

Guideline
Inspect rear shocks for leaks and damping

Rear suspension and frame

Guideline
Lubricate control cables and lever pivots

Controls and cables

Guideline
Lubricate speedometer / tachometer cables, check drive

Controls and cables

Guideline

A dry speedo cable whips the needle and eventually kills the instrument.

Every 16,000 km or 12 months

26 items

Backrest, if equipped, and accessory pannier rails (check smooth operation)

Engine

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): daily, at the first service 600 mi (1,000 km), then every 10,000 mi (16,000 km) or annually. Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.
Bank angle indicators for wear (check)

Engine

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): daily, at the first service 600 mi (1,000 km), then every 10,000 mi (16,000 km) or annually. Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.
Coolant level (check and adjust)

Engine

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): daily, at the first service 600 mi (1,000 km), then every 10,000 mi (16,000 km) or annually. Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.
Cooling system leaks (check)

Engine

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): daily, at the first service 600 mi (1,000 km), then every 10,000 mi (16,000 km) or annually. Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.
Engine leaks (check)

Engine

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): daily, at the first service 600 mi (1,000 km), then every 10,000 mi (16,000 km) or annually. Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.
Engine oil (replace)

Engine

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): at the first service 600 mi (1,000 km), then every 10,000 mi (16,000 km) or annually. Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.
Engine oil filter (replace)

Engine

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): at the first service 600 mi (1,000 km), then every 10,000 mi (16,000 km) or annually. Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.
Final drive oil leaks (check)

Engine

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): daily, at the first service 600 mi (1,000 km), then every 10,000 mi (16,000 km) or annually. Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.
Final drive oil level (check)

Engine

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): annually and every 10,000 mi (16,000 km). Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.
Front and rear suspension: damage, leaks, smooth operation (check)

Engine

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): daily, at the first service 600 mi (1,000 km), then every 10,000 mi (16,000 km) or annually. Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.
Full Autoscan with Triumph diagnostic tool

Engine

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): at the first service 600 mi (1,000 km), then every 10,000 mi (16,000 km) or annually. Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.
Instruments, chassis ECM and engine ECM latest calibration (check with Triumph diagnostic tool)

Engine

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): at the first service 600 mi (1,000 km), then every 10,000 mi (16,000 km) or annually. Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.
Lights, instruments and electrical systems (check)

Engine

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): daily, at the first service 600 mi (1,000 km), then every 10,000 mi (16,000 km) or annually. Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.
Road test; service record and service indicator reset

Engine

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): at the first service 600 mi (1,000 km), then every 10,000 mi (16,000 km) or annually. Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.
Fuel hoses for chafing, cracks or damage (check)

Fuel and air

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): daily, at the first service 600 mi (1,000 km), then every 10,000 mi (16,000 km) or annually. Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.
Clutch fluid level (check)

Primary and gearbox

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): daily, at the first service 600 mi (1,000 km), then every 10,000 mi (16,000 km) or annually. Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.
Clutch operation (check)

Primary and gearbox

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): daily, at the first service 600 mi (1,000 km), then every 10,000 mi (16,000 km) or annually. Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.
Steering free operation (check)

Front end

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): daily, at the first service 600 mi (1,000 km), then every 10,000 mi (16,000 km) or annually. Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.
Steering head bearings (check)

Front end

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): annually and every 10,000 mi (16,000 km). Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.
Outstanding service bulletins and warranty work

Rear suspension and frame

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): at the first service 600 mi (1,000 km), then every 10,000 mi (16,000 km) or annually. Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.
Side stand smooth operation (check)

Rear suspension and frame

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): daily, at the first service 600 mi (1,000 km), then every 10,000 mi (16,000 km) or annually. Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.
Brake fluid levels (check)

Brakes

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): daily, at the first service 600 mi (1,000 km), then every 10,000 mi (16,000 km) or annually. Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.
Brake pad wear (check)

Brakes

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): daily, at the first service 600 mi (1,000 km), then every 10,000 mi (16,000 km) or annually. Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.
Brake system operation (check)

Brakes

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): daily, at the first service 600 mi (1,000 km), then every 10,000 mi (16,000 km) or annually. Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.
Tire pressures (check and adjust)

Wheels and tires

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): daily, at the first service 600 mi (1,000 km), then every 10,000 mi (16,000 km) or annually. Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.
Tire wear and damage (check)

Wheels and tires

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): daily, at the first service 600 mi (1,000 km), then every 10,000 mi (16,000 km) or annually. Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.

Every 16,000 km or 2 years

1 item

Compression test (or leak-down)

Engine

Guideline

Every 16,000 km

7 items

Coolant hoses for chafing, cracks or damage (check)

Engine

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): every 10,000 mi (16,000 km). Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.
Throttle bodies (balance)

Engine

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): every 10,000 mi (16,000 km). Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.
Air filter (replace; more often in wet or dusty riding)

Fuel and air

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): every 10,000 mi (16,000 km). Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.
Fuel filter (replace)

Fuel and air

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): every 10,000 mi (16,000 km). Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.
Side stand pivot pin (clean)

Rear suspension and frame

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): every 10,000 mi (16,000 km). Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.
Rear wheel needle roller bearing, left outer (lubricate)

Wheels and tires

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): every 10,000 mi (16,000 km). Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.
Wheel bearings: wear and smooth operation (check)

Wheels and tires

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): first at 30,000 mi (48,000 km), then every 10,000 mi (16,000 km). Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.

Every 19,500 km or 2 years

5 items

Replace air filter element

Fuel and air

Guideline
Synchronize throttle bodies

Fuel and air

Guideline
Change final drive (rear drive) oil

Final drive

Guideline
Clean and grease rear suspension linkage

Rear suspension and frame

Guideline
Grease swingarm pivot

Rear suspension and frame

Guideline

Every 24,000 km or 3 years

1 item

Change fork oil

Front end

Guideline

Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 24,000 km or 4 years

1 item

Check valve clearances (shim adjusted)

Engine

Guideline

Every 25,500 km or 4 years

1 item

Replace spark plugs

Engine

Guideline

Every 32,000 km or 4 years

3 items

Lubricate drive shaft splines / check U-joint

Final drive

Guideline
Repack / replace steering head bearings

Front end

Guideline

Many old machines use loose balls in cups and cones. Taper roller conversions are common.
Repack / replace wheel bearings

Wheels and tires

Guideline

Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 32,000 km

4 items

Final drive oil (replace)

Engine

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): at the first service 600 mi (1,000 km), then every 20,000 mi (32,000 km). Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.
Spark plugs (replace)

Engine

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): every 20,000 mi (32,000 km). Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.
Valve clearances (check and adjust)

Engine

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): every 20,000 mi (32,000 km). Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.
Camshaft timing (check and adjust)

Ignition and electrics

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): every 20,000 mi (32,000 km). Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.

Every 38,500 km or 4 years

1 item

Replace fuel filter

Fuel and air

Guideline

Every 40,000 km or 6 years

1 item

Replace swingarm bushes / bearings

Rear suspension and frame

Guideline

Every 48,000 km

4 items

Rear suspension linkage (lubricate)

Engine

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): every 30,000 mi (48,000 km). Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.
Fork oil (replace)

Front end

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): every 30,000 mi (48,000 km). Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.
Steering head bearings (lubricate)

Front end

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): every 30,000 mi (48,000 km). Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.
Swingarm spindle (lubricate)

Rear suspension and frame

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): every 30,000 mi (48,000 km). Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.

Every 48,500 km or 6 years

1 item

Rebuild forks: seals, bushes, springs

Front end

Guideline

Every 6 months

1 item

Clean battery terminals, check charge and strap

Ignition and electrics

Guideline

Every 2 years

7 items

Replace coolant

Engine

Guideline
Inspect wiring, bullet connectors and ground points

Ignition and electrics

Guideline
Clutch fluid (replace)

Primary and gearbox

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): every 2 years regardless of mileage. Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.
Replace hydraulic clutch fluid

Primary and gearbox

Guideline
Inspect frame, welds and lugs for cracks

Rear suspension and frame

Guideline
Brake fluid (replace)

Brakes

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): every 2 years regardless of mileage. Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.
Replace brake fluid

Brakes

Guideline

Every 3 years

1 item

Coolant (replace)

Engine

Factory

Factory: Scheduled maintenance table (handbook pp.121-122, ManualsLib viewer pp.121-122): every 3 years regardless of mileage. Columns as printed: every day; first service at 600 mi (1,000 km) or 6 months; annual service; mileage-based services at 10,000 and 30,000 mi (16,000 and 48,000 km), 20,000 mi (32,000 km) and 40,000 mi (64,000 km); whichever comes first.

Every 4 years

3 items

Replace fuel lines

Fuel and air

Guideline

Old rubber and modern ethanol fuel do not mix well.
Inspect brake hoses; replace old rubber

Brakes

Guideline
Rebuild calipers and master cylinders (seals)

Brakes

Guideline

Every 6 years

1 item

Replace tires on age (regardless of tread)

Wheels and tires

Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.