No photo of this model in the library yet.

Have this bike? Send a photo or the manual's service chart

Triumph · Shim-adjusted overhead-cam four-stroke, wet sump, gearbox shares engine oil, shaft drive

Tiger 1200

Library entry covers 2012-2025

52 factory 48 guideline

Published source

Triumph Tiger 1200 Series Owner's Handbook (3855518-EN, 10.2017), Scheduled maintenance table pp.173-174

Factory owner's handbook. Covers Triumph Tiger 1200 owner's handbook 3855518-EN issue 1, copyright 10.2017, for the Tiger 1200 XR and XC variants named on its cover; other editions not compared.

100 items for a 2019 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)

Engine cycle: Four-stroke
Engine lubrication: Wet sump (oil in crankcase)
Oil filtration: Replaceable cartridge or spin-on filter
Valve gear: Overhead cam, shim adjusted (incl. desmo)
Ignition: Electronic (CDI / transistor / ECU)
Charging: Alternator / stator with rectifier
Battery: Wet cell (flooded lead-acid, needs topping up)
Fuel system: Fuel injection
Cooling: Liquid cooled
Primary drive: Gear or chain inside engine, shares engine oil
Gearbox oil: Shares engine oil
Clutch control: Hand lever, cable
Final drive: Shaft
Front suspension: Telescopic fork
Rear suspension: Swingarm, single shock / cantilever
Front brake: Disc, hydraulic
Rear brake: Disc, hydraulic
Wheels: Cast / alloy, tubeless
Sidecar: No sidecar

Maintenance schedule

2019 Triumph Tiger 1200

On the road: every 300 km

1 item

Check engine oil level

Pre-ride / on the road

Guideline

Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 500 km

2 items

Check lights, horn, brake light switches

Pre-ride / on the road

Guideline
Check tire pressures

Pre-ride / on the road

Guideline

On the road: every 800 km

1 item

Check coolant level

Pre-ride / on the road

Guideline

Every 1,600 km or 6 months

1 item

Inspect tire tread, sidewalls and date codes

Wheels and tires

Guideline

Every 5,000 km or 12 months

7 items

Check throttle cable(s) free play and return

Fuel and air

Guideline
Check steering head bearing adjustment

Front end

Guideline
Inspect fork seals, stanchions and fork boots

Front end

Guideline
Check footrests, pegs, rear brake and gear lever pivots

Rear suspension and frame

Guideline
Grease and check center / side stand and springs

Rear suspension and frame

Guideline
Check brake pads and discs

Brakes

Guideline
Check wheel bearings for play

Wheels and tires

Guideline

Every 6,500 km or 12 months

2 items

Inspect, clean and gap spark plugs

Engine

Guideline
Adjust clutch free play, lubricate cable and lever pivot

Primary and gearbox

Guideline

Every 8,000 km or 12 months

2 items

Change engine oil

Engine

Guideline

Pre-1970 machines: many owners run non-detergent or classic-spec oil with no filter, so short intervals matter. Dry sump: drain the tank and the crankcase/sump, flush the tank and clean the feed and return screens.
Replace oil filter

Engine

Guideline

Every 9,500 km or 12 months

8 items

Inspect coolant hoses and clamps

Engine

Guideline
Clean / inspect air filter

Fuel and air

Guideline

Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
Check charging voltage and regulator / cut-out

Ignition and electrics

Guideline
Check final drive for leaks and bearing play

Final drive

Guideline
Check swingarm bushes for play

Rear suspension and frame

Guideline
Inspect rear shocks for leaks and damping

Rear suspension and frame

Guideline
Lubricate control cables and lever pivots

Controls and cables

Guideline
Lubricate speedometer / tachometer cables, check drive

Controls and cables

Guideline

A dry speedo cable whips the needle and eventually kills the instrument.

Every 16,000 km or 12 months

33 items

Accessory rack sliding carriage (check)

Engine

Factory

Factory: Scheduled maintenance table (pp.173-174): only if fitted; annually and every 10,000 miles. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Autoscan with Triumph diagnostic tool

Engine

Factory

Factory: Scheduled maintenance table (pp.173-174): at the first service, annually and every 10,000 miles; print a customer copy. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Bank angle indicators (check wear)

Engine

Factory

Factory: Scheduled maintenance table (pp.173-174): daily, at the first service, annually and every 10,000 miles. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Coolant level (check, adjust)

Engine

Factory

Factory: Scheduled maintenance table (pp.173-174): daily, at the first service, annually and every 10,000 miles. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Cooling system (check for leaks)

Engine

Factory

Factory: Scheduled maintenance table (pp.173-174): daily, at the first service, annually and every 10,000 miles. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Engine (check for leaks)

Engine

Factory

Factory: Scheduled maintenance table (pp.173-174): daily, at the first service, annually and every 10,000 miles. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Engine oil (renew)

Engine

Factory

Factory: Scheduled maintenance table (pp.173-174): at the first service, annually and every 10,000 miles. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Engine oil filter (renew)

Engine

Factory

Factory: Scheduled maintenance table (pp.173-174): at the first service, annually and every 10,000 miles. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Fasteners (inspect for security)

Engine

Factory

Factory: Scheduled maintenance table (pp.173-174): daily, at the first service, annually and every 10,000 miles. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Final drive (check for oil leaks)

Engine

Factory

Factory: Scheduled maintenance table (pp.173-174): daily, at the first service, annually and every 10,000 miles. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Final drive oil level (check)

Engine

Factory

Factory: Scheduled maintenance table (pp.173-174): annually and every 10,000 miles. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Front and rear suspension (check)

Engine

Factory

Factory: Scheduled maintenance table (pp.173-174): check for damage, leaks and smooth operation daily, at the first service, annually and every 10,000 miles. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Gear change pedal bushes (clean)

Engine

Factory

Factory: Scheduled maintenance table (pp.173-174): annually and every 10,000 miles. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Headstock bearings (check, adjust)

Engine

Factory

Factory: Scheduled maintenance table (pp.173-174): annually and every 10,000 miles. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Instruments, chassis ECM and engine ECM (check for latest calibration)

Engine

Factory

Factory: Scheduled maintenance table (pp.173-174): at the first service, annually and every 10,000 miles, using the Triumph diagnostic tool. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Lights, instruments and electrical systems (check)

Engine

Factory

Factory: Scheduled maintenance table (pp.173-174): daily, at the first service, annually and every 10,000 miles. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Fuel system (check for leaks and chafing)

Fuel and air

Factory

Factory: Scheduled maintenance table (pp.173-174): daily, at the first service, annually and every 10,000 miles. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Clutch fluid level (check)

Primary and gearbox

Factory

Factory: Scheduled maintenance table (pp.173-174): daily, at the first service, annually and every 10,000 miles. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Clutch master cylinder (check for leaks)

Primary and gearbox

Factory

Factory: Scheduled maintenance table (pp.173-174): at the first service, annually and every 10,000 miles. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Clutch operation (check)

Primary and gearbox

Factory

Factory: Scheduled maintenance table (pp.173-174): daily, at the first service, annually and every 10,000 miles. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Steering (check for free operation)

Front end

Factory

Factory: Scheduled maintenance table (pp.173-174): daily, at the first service, annually and every 10,000 miles. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Center stand (check)

Rear suspension and frame

Factory

Factory: Scheduled maintenance table (pp.173-174): daily, at the first service, annually and every 10,000 miles. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Center stand flanged sleeves (check, clean, grease)

Rear suspension and frame

Factory

Factory: Scheduled maintenance table (pp.173-174): annually and every 10,000 miles. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Side stand (check)

Rear suspension and frame

Factory

Factory: Scheduled maintenance table (pp.173-174): daily, at the first service, annually and every 10,000 miles. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Brake calipers (check for leaks and seized pistons)

Brakes

Factory

Factory: Scheduled maintenance table (pp.173-174): daily, at the first service, annually and every 10,000 miles. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Brake fluid levels (check)

Brakes

Factory

Factory: Scheduled maintenance table (pp.173-174): daily, at the first service, annually and every 10,000 miles. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Brake master cylinders (check for leaks)

Brakes

Factory

Factory: Scheduled maintenance table (pp.173-174): daily, at the first service, annually and every 10,000 miles. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Brake pads (check wear)

Brakes

Factory

Factory: Scheduled maintenance table (pp.173-174): daily, at the first service, annually and every 10,000 miles. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Spokes (check)

Wheels and tires

Factory

Factory: Scheduled maintenance table (pp.173-174): models with spoked wheels: check for broken or damaged spokes and spoke tightness at the first service, annually and every 10,000 miles. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Tire pressures (check, adjust)

Wheels and tires

Factory

Factory: Scheduled maintenance table (pp.173-174): daily, at the first service, annually and every 10,000 miles. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Tire wear and damage (check)

Wheels and tires

Factory

Factory: Scheduled maintenance table (pp.173-174): daily, at the first service, annually and every 10,000 miles. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Wheel bearings (check)

Wheels and tires

Factory

Factory: Scheduled maintenance table (pp.173-174): check for wear and smooth operation at the first service, annually and every 10,000 miles. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Wheels (inspect for damage)

Wheels and tires

Factory

Factory: Scheduled maintenance table (pp.173-174): daily, at the first service, annually and every 10,000 miles. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.

Every 16,000 km or 2 years

1 item

Compression test (or leak-down)

Engine

Guideline

Every 16,000 km

5 items

Coolant hoses (check)

Engine

Factory

Factory: Scheduled maintenance table (pp.173-174): check for chafing, cracks or damage and replace if necessary, every 10,000 miles. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Throttle bodies (balance)

Engine

Factory

Factory: Scheduled maintenance table (pp.173-174): every 10,000 miles. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Throttle body plates (check, clean)

Engine

Factory

Factory: Scheduled maintenance table (pp.173-174): every 10,000 miles. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Air cleaner (renew)

Fuel and air

Factory

Factory: Scheduled maintenance table (pp.173-174): every 10,000 miles. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Side stand pivot pin (clean, grease)

Rear suspension and frame

Factory

Factory: Scheduled maintenance table (pp.173-174): every 10,000 miles. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.

Every 19,500 km or 2 years

5 items

Replace air filter element

Fuel and air

Guideline
Synchronize throttle bodies

Fuel and air

Guideline
Change final drive (rear drive) oil

Final drive

Guideline
Clean and grease rear suspension linkage

Rear suspension and frame

Guideline
Grease swingarm pivot

Rear suspension and frame

Guideline

Every 24,000 km or 3 years

1 item

Change fork oil

Front end

Guideline

Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 24,000 km or 4 years

1 item

Check valve clearances (shim adjusted)

Engine

Guideline

Every 25,500 km or 4 years

1 item

Replace spark plugs

Engine

Guideline

Every 32,000 km or 4 years

3 items

Lubricate drive shaft splines / check U-joint

Final drive

Guideline
Repack / replace steering head bearings

Front end

Guideline

Many old machines use loose balls in cups and cones. Taper roller conversions are common.
Repack / replace wheel bearings

Wheels and tires

Guideline

Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 32,000 km

7 items

Headstock bearings (lubricate)

Engine

Factory

Factory: Scheduled maintenance table (pp.173-174): every 20,000 miles (20,000 and 40,000). Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Rear suspension linkage (check, lubricate)

Engine

Factory

Factory: Scheduled maintenance table (pp.173-174): every 20,000 miles (20,000 and 40,000). Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Secondary air injection system (check)

Engine

Factory

Factory: Scheduled maintenance table (pp.173-174): every 20,000 miles (20,000 and 40,000). Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Spark plugs (check)

Engine

Factory

Factory: Scheduled maintenance table (pp.173-174): at 10,000 and 30,000 miles. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Spark plugs (renew)

Engine

Factory

Factory: Scheduled maintenance table (pp.173-174): every 20,000 miles (20,000 and 40,000). Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Valve clearances (check, adjust)

Engine

Factory

Factory: Scheduled maintenance table (pp.173-174): every 20,000 miles (20,000 and 40,000). Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Camshaft timing (check, adjust)

Ignition and electrics

Factory

Factory: Scheduled maintenance table (pp.173-174): every 20,000 miles (20,000 and 40,000). Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.

Every 38,500 km or 4 years

1 item

Replace fuel filter

Fuel and air

Guideline

Every 40,000 km or 6 years

1 item

Replace swingarm bushes / bearings

Rear suspension and frame

Guideline

Every 48,500 km or 6 years

1 item

Rebuild forks: seals, bushes, springs

Front end

Guideline

Every 64,000 km

1 item

Fork oil (renew)

Front end

Factory

Factory: Scheduled maintenance table (pp.173-174): at 40,000 miles. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.

Every 6 months

1 item

Clean battery terminals, check charge and strap

Ignition and electrics

Guideline

Every 2 years

6 items

Replace coolant

Engine

Guideline
Inspect wiring, bullet connectors and ground points

Ignition and electrics

Guideline
Clutch fluid (renew)

Primary and gearbox

Factory

Factory: Scheduled maintenance table (pp.173-174): every 2 years, regardless of mileage. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Inspect frame, welds and lugs for cracks

Rear suspension and frame

Guideline
Brake fluid (renew)

Brakes

Factory

Factory: Scheduled maintenance table (pp.173-174): every 2 years, regardless of mileage. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Replace brake fluid

Brakes

Guideline

Every 3 years

1 item

Coolant (renew)

Engine

Factory

Factory: Scheduled maintenance table (pp.173-174): every 3 years, regardless of mileage. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.

Every 4 years

5 items

Evaporative loss hoses (renew)

Engine

Factory

Factory: Scheduled maintenance table (pp.173-174): every four years, regardless of mileage. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Fuel hoses (renew)

Fuel and air

Factory

Factory: Scheduled maintenance table (pp.173-174): every four years, regardless of mileage. Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.
Replace fuel lines

Fuel and air

Guideline

Old rubber and modern ethanol fuel do not mix well.
Inspect brake hoses; replace old rubber

Brakes

Guideline
Rebuild calipers and master cylinders (seals)

Brakes

Guideline

Every 6 years

1 item

Replace tires on age (regardless of tread)

Wheels and tires

Guideline

No interval set

1 item

Final drive oil (renew)

Engine

Factory

Factory: Scheduled maintenance table (pp.173-174): first service only (500 miles or 1 month). Columns: every day, first service at 500 miles (800 km) or 1 month, annual service, then mileage-based services at 10,000 and 30,000 miles (16,000 and 48,000 km), 20,000 miles (32,000 km) and 40,000 miles (64,000 km), whichever comes first.

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.