Trident / Sprint / Speed Triple / Tiger (Hinckley)
Library entry covers 1991-2026
Published source
Triumph Sprint ST and Sprint RS Owners Handbook (U.S.A.), publication part number 3850906 issue 1, 1999
Factory owner's handbook. Covers Sprint ST / Sprint RS 955cc, U.S.A. models, handbook 1999.
Open the source52 items for a 2003 model, grouped by interval the way a factory chart is laid out.
How this bike is built (what the schedule is based on)
- Engine cycle
- Four-stroke
- Engine lubrication
- Wet sump (oil in crankcase)
- Oil filtration
- Replaceable cartridge or spin-on filter
- Valve gear
- Overhead cam, shim adjusted (incl. desmo)
- Ignition
- Electronic (CDI / transistor / ECU)
- Charging
- Alternator / stator with rectifier
- Battery
- Wet cell (flooded lead-acid, needs topping up)
- Fuel system
- Fuel injection
- Cooling
- Liquid cooled
- Primary drive
- Gear or chain inside engine, shares engine oil
- Gearbox oil
- Shares engine oil
- Clutch control
- Hand lever, cable
- Final drive
- Chain
- Front suspension
- Telescopic fork
- Rear suspension
- Swingarm, single shock / cantilever
- Front brake
- Disc, hydraulic
- Rear brake
- Disc, hydraulic
- Wheels
- Cast / alloy, tubeless
- Sidecar
- No sidecar
2003 Triumph Trident / Sprint / Speed Triple / Tiger (Hinckley)
On the road: every 200 mi
2 items-
Check engine oil levelPre-ride / on the roadGuideline
Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.
-
Lubricate drive chainPre-ride / on the roadFactory
Manual: Drive chain - lubricate. Factory: Chart p.55: every 200 miles (300 km).
On the road: every 300 mi
2 items-
Check lights, horn, brake light switchesPre-ride / on the roadGuideline
-
Check tire pressuresPre-ride / on the roadGuideline
On the road: every 500 mi
1 item-
Check coolant levelPre-ride / on the roadGuideline
On the road: every 6,000 mi or 12 months
1 item-
Check chain slack and rear wheel alignmentPre-ride / on the roadFactory
Manual: Drive chain slack - check/adjust. Factory: Chart p.55: daily and at every service.
Every 500 mi
1 item-
Inspect chain and sprockets for wear (measure stretch)Final driveFactory
Manual: Drive chain - wear check. Factory: Chart p.55: every 500 miles (800 km).
Every 3,000 mi or 12 months
4 items-
Clean drive chain thoroughly (remove and soak, re-lube)Final driveGuideline
Non O-ring chains on old machines: remove, clean, soak in hot chain grease or lube, refit with the master link clip closed end leading.
-
Check footrests, pegs, rear brake and gear lever pivotsRear suspension and frameGuideline
-
Grease and check center / side stand and springsRear suspension and frameGuideline
-
Check wheel bearings for playWheels and tiresGuideline
Every 4,000 mi or 12 months
1 item-
Inspect, clean and gap spark plugsEngineGuideline
Every 6,000 mi or 12 months
16 items-
Walk-around: check nuts and bolts for vibration looseningPre-ride / on the roadFactory
Manual: Fasteners - inspect visually for security. Factory: Chart p.55: daily and at every service.
-
Change engine oilEngineFactory
Manual: Engine oil - renew. Factory: Scheduled Maintenance Chart p.54; also at 500 miles / 1 month.
-
Engine ECM - check for stored DTCsEngineFactory
Factory: Chart p.54; also at 500 miles.
-
Inspect coolant hoses and clampsEngineFactory
Manual: Cooling system - check for leaks. Factory: Chart p.55: daily and at every service.
-
Replace oil filterEngineFactory
Manual: Engine oil filter - renew. Factory: Chart p.54; also at 500 miles / 1 month.
-
Check throttle cable(s) free play and returnFuel and airFactory
Manual: Throttle cable - check/adjust. Factory: Chart p.54: daily and at every service.
-
Clean / inspect air filterFuel and airGuideline
Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
-
Check charging voltage and regulator / cut-outIgnition and electricsGuideline
-
Adjust clutch free play, lubricate cable and lever pivotPrimary and gearboxFactory
Manual: Clutch cable - check/adjust. Factory: Chart p.55: daily and at every service.
-
Inspect fork seals, stanchions and fork bootsFront endFactory
Manual: Forks - check for leaks/smooth operation. Factory: Chart p.55: daily and at every service.
-
Check swingarm bushes for playRear suspension and frameGuideline
-
Inspect rear shocks for leaks and dampingRear suspension and frameGuideline
-
Check brake pads and discsBrakesFactory
Manual: Brake pads - check wear levels. Factory: Chart p.55: daily and at every service.
-
Inspect tire tread, sidewalls and date codesWheels and tiresFactory
Manual: Tire wear/tire damage - check. Factory: Chart p.55: daily and at every service.
-
Lubricate control cables and lever pivotsControls and cablesGuideline
-
Lubricate speedometer / tachometer cables, check driveControls and cablesGuideline
A dry speedo cable whips the needle and eventually kills the instrument.
Every 10,000 mi or 2 years
1 item-
Compression test (or leak-down)EngineGuideline
Every 12,000 mi or 2 years
9 items-
Check valve clearances (shim adjusted)EngineFactory
Manual: Valve clearances - check/adjust. Factory: Chart p.54, marked at 12000 and 24000.
-
Replace air filter elementFuel and airFactory
Manual: Air cleaner element - renew. Factory: Chart p.54, marked at 12000 and 24000.
-
Replace fuel filterFuel and airFactory
Manual: Fuel filter - renew. Factory: Chart p.55, marked at 12000 and 24000.
-
Synchronize throttle bodiesFuel and airFactory
Manual: Throttle bodies - balance. Factory: Chart p.54, marked at 12000 and 24000.
-
Change fork oilFront endFactory
Manual: Fork oil - renew. Factory: Chart p.55, marked at 12000 and 24000.
-
Check steering head bearing adjustmentFront endFactory
Manual: Headstock bearing - check/adjust. Factory: Chart p.55, marked at 12000 and 24000.
-
Repack / replace steering head bearingsFront endFactory
Manual: Headstock bearing - lubricate. Factory: Chart p.55, marked at 12000 and 24000.
-
Grease swingarm pivotRear suspension and frameGuideline
-
Repack / replace wheel bearingsWheels and tiresFactory
Manual: Rear wheel bearing - lubricate. Factory: Chart p.55, marked at 12000 and 24000.
Every 18,000 mi
1 item-
Replace chain and sprockets (wear based)Final driveGuideline
Every 24,000 mi or 3 years
1 item-
Clean and grease rear suspension linkageRear suspension and frameFactory
Manual: Rear suspension - lubricate. Factory: Chart p.55: 3 years / 24000 miles (40000 km).
Every 24,000 mi or 4 years
1 item-
Replace spark plugsEngineFactory
Manual: Spark plugs - renew. Factory: Chart p.54, marked at 24000 column.
Every 25,000 mi or 6 years
1 item-
Replace swingarm bushes / bearingsRear suspension and frameGuideline
Every 30,000 mi or 6 years
1 item-
Rebuild forks: seals, bushes, springsFront endGuideline
Every 6 months
1 item-
Clean battery terminals, check charge and strapIgnition and electricsGuideline
Every 2 years
5 items-
Replace coolantEngineFactory
Manual: Coolant - renew. Factory: Chart p.55: every two years.
-
Inspect wiring, bullet connectors and ground pointsIgnition and electricsGuideline
-
Inspect frame, welds and lugs for cracksRear suspension and frameGuideline
-
Rebuild calipers and master cylinders (seals)BrakesFactory
Manual: Brake master cylinder and calipers - renew seals. Factory: Chart p.55: each every 2 years.
-
Replace brake fluidBrakesFactory
Manual: Brake fluid - renew. Factory: Chart p.55: every 2 years. Levels checked daily.
Every 4 years
2 items-
Replace fuel linesFuel and airGuideline
Old rubber and modern ethanol fuel do not mix well.
-
Inspect brake hoses; replace old rubberBrakesFactory
Manual: Brake hoses - renew. Factory: Chart p.55: every 4 years.
Every 6 years
1 item-
Replace tires on age (regardless of tread)Wheels and tiresGuideline
Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.
Keep up with this schedule on your phone
Add the bike in the app and this chart loads itself, ready to log against and edit.


