No photo of this model in the library yet.

Have this bike? Send a photo or the manual's service chart

TVS · Overhead-cam four-stroke single, wet sump, separate gearbox oil, CVT belt drive

NTorq 125

Library entry covers 2020-2024

33 factory 47 guideline

Published source

TVS NTORQ 125 Owner's Manual (non-connected cluster, BSVI), periodic maintenance schedule (official PDF pp.54-56)

Factory source. Covers TVS NTORQ 125 owner's manual, non-connected cluster, BSVI fuel-injected (official PDF in the Before-April-2025 folder); connected-cluster version not compared.

80 items for a 2020 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)

Engine cycle: Four-stroke
Engine lubrication: Wet sump (oil in crankcase)
Oil filtration: Replaceable cartridge or spin-on filter
Valve gear: Overhead cam, screw/locknut adjusters
Ignition: Electronic (CDI / transistor / ECU)
Charging: Alternator / stator with rectifier
Battery: Wet cell (flooded lead-acid, needs topping up)
Fuel system: Fuel injection
Cooling: Air / oil cooled
Primary drive: Gear or chain inside engine, shares engine oil
Gearbox oil: Separate gearbox oil
Clutch control: Automatic or semi-automatic
Final drive: Belt CVT, scooter automatic
Front suspension: Telescopic fork
Rear suspension: Swingarm, twin shocks
Front brake: Disc, hydraulic
Rear brake: Drum (or band / belt rim)
Wheels: Cast / alloy, tubeless
Sidecar: No sidecar

Maintenance schedule

2020 TVS NTorq 125

On the road: every 300 km

1 item

Check engine oil level

Pre-ride / on the road

Guideline

Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 500 km

2 items

Check lights, horn, brake light switches

Pre-ride / on the road

Guideline
Check tire pressures

Pre-ride / on the road

Guideline

Every 1,600 km or 6 months

2 items

Adjust rear drum brake and rod / cable linkage

Brakes

Guideline
Inspect tire tread, sidewalls and date codes

Wheels and tires

Guideline

Every 3,000 km or 4 months

16 items

All fasteners (inspect and tighten)

Engine

Factory

Factory: Periodic maintenance schedule (manual pp.48-50, PDF pp.54-56): at every service: every 3,000 km or 4 months. Columns as printed: free services 1st 500-750 km or 2 months, 2nd 2,500-3,000 km or 4 months, 3rd 5,000-6,000 km or 8 months, 4th 8,500-9,000 km or 12 months; after the free services, every 3,000 km or 4 months and every 6,000 km or 8 months, whichever comes first. Codes: R replace; I inspect; T top up; C clean; A adjust; DR drain; L lubricate; TI tighten; S set.
Bulbs, horn and switches (inspect)

Engine

Factory

Factory: Periodic maintenance schedule (manual pp.48-50, PDF pp.54-56): at every service: every 3,000 km or 4 months. Columns as printed: free services 1st 500-750 km or 2 months, 2nd 2,500-3,000 km or 4 months, 3rd 5,000-6,000 km or 8 months, 4th 8,500-9,000 km or 12 months; after the free services, every 3,000 km or 4 months and every 6,000 km or 8 months, whichever comes first. Codes: R replace; I inspect; T top up; C clean; A adjust; DR drain; L lubricate; TI tighten; S set.
Engine oil (inspect and top up)

Engine

Factory

Factory: Periodic maintenance schedule (manual pp.48-50, PDF pp.54-56): at the 2nd and 4th services, then every 3,000 km or 4 months. Columns as printed: free services 1st 500-750 km or 2 months, 2nd 2,500-3,000 km or 4 months, 3rd 5,000-6,000 km or 8 months, 4th 8,500-9,000 km or 12 months; after the free services, every 3,000 km or 4 months and every 6,000 km or 8 months, whichever comes first. Codes: R replace; I inspect; T top up; C clean; A adjust; DR drain; L lubricate; TI tighten; S set.
Front and rear suspension (inspect)

Engine

Factory

Factory: Periodic maintenance schedule (manual pp.48-50, PDF pp.54-56): at every service: every 3,000 km or 4 months. Columns as printed: free services 1st 500-750 km or 2 months, 2nd 2,500-3,000 km or 4 months, 3rd 5,000-6,000 km or 8 months, 4th 8,500-9,000 km or 12 months; after the free services, every 3,000 km or 4 months and every 6,000 km or 8 months, whichever comes first. Codes: R replace; I inspect; T top up; C clean; A adjust; DR drain; L lubricate; TI tighten; S set.
Head lamp beam (inspect and adjust)

Engine

Factory

Factory: Periodic maintenance schedule (manual pp.48-50, PDF pp.54-56): at every service: every 3,000 km or 4 months. Columns as printed: free services 1st 500-750 km or 2 months, 2nd 2,500-3,000 km or 4 months, 3rd 5,000-6,000 km or 8 months, 4th 8,500-9,000 km or 12 months; after the free services, every 3,000 km or 4 months and every 6,000 km or 8 months, whichever comes first. Codes: R replace; I inspect; T top up; C clean; A adjust; DR drain; L lubricate; TI tighten; S set.
Malfunction codes (inspect)

Engine

Factory

Factory: Periodic maintenance schedule (manual pp.48-50, PDF pp.54-56): at every service: every 3,000 km or 4 months. Columns as printed: free services 1st 500-750 km or 2 months, 2nd 2,500-3,000 km or 4 months, 3rd 5,000-6,000 km or 8 months, 4th 8,500-9,000 km or 12 months; after the free services, every 3,000 km or 4 months and every 6,000 km or 8 months, whichever comes first. Codes: R replace; I inspect; T top up; C clean; A adjust; DR drain; L lubricate; TI tighten; S set.
Air cleaner foam and paper elements (inspect and clean)

Fuel and air

Factory

Factory: Periodic maintenance schedule (manual pp.48-50, PDF pp.54-56): at every service: every 3,000 km or 4 months. Columns as printed: free services 1st 500-750 km or 2 months, 2nd 2,500-3,000 km or 4 months, 3rd 5,000-6,000 km or 8 months, 4th 8,500-9,000 km or 12 months; after the free services, every 3,000 km or 4 months and every 6,000 km or 8 months, whichever comes first. Codes: R replace; I inspect; T top up; C clean; A adjust; DR drain; L lubricate; TI tighten; S set.
Air cleaner oil collection tubes (inspect and drain)

Fuel and air

Factory

Factory: Periodic maintenance schedule (manual pp.48-50, PDF pp.54-56): from the 2nd service, every 3,000 km or 4 months; drain oil if necessary. Columns as printed: free services 1st 500-750 km or 2 months, 2nd 2,500-3,000 km or 4 months, 3rd 5,000-6,000 km or 8 months, 4th 8,500-9,000 km or 12 months; after the free services, every 3,000 km or 4 months and every 6,000 km or 8 months, whichever comes first. Codes: R replace; I inspect; T top up; C clean; A adjust; DR drain; L lubricate; TI tighten; S set.
Fuel tank assembly (inspect and clean)

Fuel and air

Factory

Factory: Periodic maintenance schedule (manual pp.48-50, PDF pp.54-56): at every service: every 3,000 km or 4 months. Columns as printed: free services 1st 500-750 km or 2 months, 2nd 2,500-3,000 km or 4 months, 3rd 5,000-6,000 km or 8 months, 4th 8,500-9,000 km or 12 months; after the free services, every 3,000 km or 4 months and every 6,000 km or 8 months, whichever comes first. Codes: R replace; I inspect; T top up; C clean; A adjust; DR drain; L lubricate; TI tighten; S set.
Battery voltage (inspect; recharge if needed with MF charger)

Ignition and electrics

Factory

Factory: Periodic maintenance schedule (manual pp.48-50, PDF pp.54-56): at every service: every 3,000 km or 4 months. Columns as printed: free services 1st 500-750 km or 2 months, 2nd 2,500-3,000 km or 4 months, 3rd 5,000-6,000 km or 8 months, 4th 8,500-9,000 km or 12 months; after the free services, every 3,000 km or 4 months and every 6,000 km or 8 months, whichever comes first. Codes: R replace; I inspect; T top up; C clean; A adjust; DR drain; L lubricate; TI tighten; S set.
Center and side stand pivots; kick starter pedal pivot (lubricate with TRU4 oil)

Rear suspension and frame

Factory

Factory: Periodic maintenance schedule (manual pp.48-50, PDF pp.54-56): at every service: every 3,000 km or 4 months. Columns as printed: free services 1st 500-750 km or 2 months, 2nd 2,500-3,000 km or 4 months, 3rd 5,000-6,000 km or 8 months, 4th 8,500-9,000 km or 12 months; after the free services, every 3,000 km or 4 months and every 6,000 km or 8 months, whichever comes first. Codes: R replace; I inspect; T top up; C clean; A adjust; DR drain; L lubricate; TI tighten; S set.
Brake effectiveness and play (inspect and adjust)

Brakes

Factory

Factory: Periodic maintenance schedule (manual pp.48-50, PDF pp.54-56): at every service: every 3,000 km or 4 months. Columns as printed: free services 1st 500-750 km or 2 months, 2nd 2,500-3,000 km or 4 months, 3rd 5,000-6,000 km or 8 months, 4th 8,500-9,000 km or 12 months; after the free services, every 3,000 km or 4 months and every 6,000 km or 8 months, whichever comes first. Codes: R replace; I inspect; T top up; C clean; A adjust; DR drain; L lubricate; TI tighten; S set.
Tire pressure, cold (inspect and set)

Wheels and tires

Factory

Factory: Periodic maintenance schedule (manual pp.48-50, PDF pp.54-56): at every service: every 3,000 km or 4 months. Columns as printed: free services 1st 500-750 km or 2 months, 2nd 2,500-3,000 km or 4 months, 3rd 5,000-6,000 km or 8 months, 4th 8,500-9,000 km or 12 months; after the free services, every 3,000 km or 4 months and every 6,000 km or 8 months, whichever comes first. Codes: R replace; I inspect; T top up; C clean; A adjust; DR drain; L lubricate; TI tighten; S set.
Wheel freeness (inspect)

Wheels and tires

Factory

Factory: Periodic maintenance schedule (manual pp.48-50, PDF pp.54-56): at every service: every 3,000 km or 4 months. Columns as printed: free services 1st 500-750 km or 2 months, 2nd 2,500-3,000 km or 4 months, 3rd 5,000-6,000 km or 8 months, 4th 8,500-9,000 km or 12 months; after the free services, every 3,000 km or 4 months and every 6,000 km or 8 months, whichever comes first. Codes: R replace; I inspect; T top up; C clean; A adjust; DR drain; L lubricate; TI tighten; S set.
All control cables (inspect, adjust play, lubricate ends)

Controls and cables

Factory

Factory: Periodic maintenance schedule (manual pp.48-50, PDF pp.54-56): at every service: every 3,000 km or 4 months. Columns as printed: free services 1st 500-750 km or 2 months, 2nd 2,500-3,000 km or 4 months, 3rd 5,000-6,000 km or 8 months, 4th 8,500-9,000 km or 12 months; after the free services, every 3,000 km or 4 months and every 6,000 km or 8 months, whichever comes first. Codes: R replace; I inspect; T top up; C clean; A adjust; DR drain; L lubricate; TI tighten; S set.
Evaporative emission control system hoses and canister (inspect)

Controls and cables

Factory

Factory: Periodic maintenance schedule (manual pp.48-50, PDF pp.54-56): at every service: every 3,000 km or 4 months. Columns as printed: free services 1st 500-750 km or 2 months, 2nd 2,500-3,000 km or 4 months, 3rd 5,000-6,000 km or 8 months, 4th 8,500-9,000 km or 12 months; after the free services, every 3,000 km or 4 months and every 6,000 km or 8 months, whichever comes first. Codes: R replace; I inspect; T top up; C clean; A adjust; DR drain; L lubricate; TI tighten; S set.

Every 5,000 km or 12 months

8 items

Check throttle cable(s) free play and return

Fuel and air

Guideline
Adjust automatic / semi-automatic clutch

Primary and gearbox

Guideline
Check steering head bearing adjustment

Front end

Guideline
Inspect fork seals, stanchions and fork boots

Front end

Guideline
Check footrests, pegs, rear brake and gear lever pivots

Rear suspension and frame

Guideline
Grease and check center / side stand and springs

Rear suspension and frame

Guideline
Check brake pads and discs

Brakes

Guideline
Check wheel bearings for play

Wheels and tires

Guideline

Every 6,000 km or 8 months

8 items

CVT filter element (inspect and clean)

Engine

Factory

Factory: Periodic maintenance schedule (manual pp.48-50, PDF pp.54-56): at the 3rd service, then every 6,000 km or 8 months. Columns as printed: free services 1st 500-750 km or 2 months, 2nd 2,500-3,000 km or 4 months, 3rd 5,000-6,000 km or 8 months, 4th 8,500-9,000 km or 12 months; after the free services, every 3,000 km or 4 months and every 6,000 km or 8 months, whichever comes first. Codes: R replace; I inspect; T top up; C clean; A adjust; DR drain; L lubricate; TI tighten; S set.
Engine oil (replace)

Engine

Factory

Factory: Periodic maintenance schedule (manual pp.48-50, PDF pp.54-56): at the 1st and 3rd services, then every 6,000 km or 8 months; inspect and top up at the services between. Columns as printed: free services 1st 500-750 km or 2 months, 2nd 2,500-3,000 km or 4 months, 3rd 5,000-6,000 km or 8 months, 4th 8,500-9,000 km or 12 months; after the free services, every 3,000 km or 4 months and every 6,000 km or 8 months, whichever comes first. Codes: R replace; I inspect; T top up; C clean; A adjust; DR drain; L lubricate; TI tighten; S set.
Oil filter strainer (clean)

Engine

Factory

Factory: Periodic maintenance schedule (manual pp.48-50, PDF pp.54-56): at the 1st and 3rd services, then every 6,000 km or 8 months. Columns as printed: free services 1st 500-750 km or 2 months, 2nd 2,500-3,000 km or 4 months, 3rd 5,000-6,000 km or 8 months, 4th 8,500-9,000 km or 12 months; after the free services, every 3,000 km or 4 months and every 6,000 km or 8 months, whichever comes first. Codes: R replace; I inspect; T top up; C clean; A adjust; DR drain; L lubricate; TI tighten; S set.
Tappet clearance (inspect and adjust)

Engine

Factory

Factory: Periodic maintenance schedule (manual pp.48-50, PDF pp.54-56): at the 1st and 3rd services, then every 6,000 km or 8 months. Columns as printed: free services 1st 500-750 km or 2 months, 2nd 2,500-3,000 km or 4 months, 3rd 5,000-6,000 km or 8 months, 4th 8,500-9,000 km or 12 months; after the free services, every 3,000 km or 4 months and every 6,000 km or 8 months, whichever comes first. Codes: R replace; I inspect; T top up; C clean; A adjust; DR drain; L lubricate; TI tighten; S set.
Throttle grip (lubricate with grease)

Engine

Factory

Factory: Periodic maintenance schedule (manual pp.48-50, PDF pp.54-56): at the 3rd service, then every 6,000 km or 8 months. Columns as printed: free services 1st 500-750 km or 2 months, 2nd 2,500-3,000 km or 4 months, 3rd 5,000-6,000 km or 8 months, 4th 8,500-9,000 km or 12 months; after the free services, every 3,000 km or 4 months and every 6,000 km or 8 months, whichever comes first. Codes: R replace; I inspect; T top up; C clean; A adjust; DR drain; L lubricate; TI tighten; S set.
Variator cover (inspect, clean with air, lubricate kick starter)

Engine

Factory

Factory: Periodic maintenance schedule (manual pp.48-50, PDF pp.54-56): at the 3rd service, then every 6,000 km or 8 months. Columns as printed: free services 1st 500-750 km or 2 months, 2nd 2,500-3,000 km or 4 months, 3rd 5,000-6,000 km or 8 months, 4th 8,500-9,000 km or 12 months; after the free services, every 3,000 km or 4 months and every 6,000 km or 8 months, whichever comes first. Codes: R replace; I inspect; T top up; C clean; A adjust; DR drain; L lubricate; TI tighten; S set.
Transmission oil (replace)

Primary and gearbox

Factory

Factory: Periodic maintenance schedule (manual pp.48-50, PDF pp.54-56): at the 1st and 3rd services, then every 6,000 km or 8 months; inspect and top up at the services between. Columns as printed: free services 1st 500-750 km or 2 months, 2nd 2,500-3,000 km or 4 months, 3rd 5,000-6,000 km or 8 months, 4th 8,500-9,000 km or 12 months; after the free services, every 3,000 km or 4 months and every 6,000 km or 8 months, whichever comes first. Codes: R replace; I inspect; T top up; C clean; A adjust; DR drain; L lubricate; TI tighten; S set.
Rear brake cam (clean and lubricate)

Brakes

Factory

Factory: Periodic maintenance schedule (manual pp.48-50, PDF pp.54-56): at the 3rd service, then every 6,000 km or 8 months. Columns as printed: free services 1st 500-750 km or 2 months, 2nd 2,500-3,000 km or 4 months, 3rd 5,000-6,000 km or 8 months, 4th 8,500-9,000 km or 12 months; after the free services, every 3,000 km or 4 months and every 6,000 km or 8 months, whichever comes first. Codes: R replace; I inspect; T top up; C clean; A adjust; DR drain; L lubricate; TI tighten; S set.

Every 6,500 km or 12 months

3 items

Inspect, clean and gap spark plugs

Engine

Guideline
Inspect CVT drive belt, rollers / sliders and clutch shoes

Final drive

Guideline

Typical scooter interval. Your owner's manual figure governs; check belt width against the service limit.
Lubricate brake cam spindles, check linings and drums

Brakes

Guideline

Every 8,000 km or 12 months

2 items

Change engine oil

Engine

Guideline

Pre-1970 machines: many owners run non-detergent or classic-spec oil with no filter, so short intervals matter. Dry sump: drain the tank and the crankcase/sump, flush the tank and clean the feed and return screens.
Replace oil filter

Engine

Guideline

Every 9,500 km or 12 months

6 items

Clean / inspect air filter

Fuel and air

Guideline

Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
Check charging voltage and regulator / cut-out

Ignition and electrics

Guideline
Check swingarm bushes for play

Rear suspension and frame

Guideline
Inspect rear shocks for leaks and damping

Rear suspension and frame

Guideline
Lubricate control cables and lever pivots

Controls and cables

Guideline
Lubricate speedometer / tachometer cables, check drive

Controls and cables

Guideline

A dry speedo cable whips the needle and eventually kills the instrument.

Every 12,000 km

5 items

CVT filter element (replace)

Engine

Factory

Factory: Periodic maintenance schedule (manual pp.48-50, PDF pp.54-56): every 12,000 km. Columns as printed: free services 1st 500-750 km or 2 months, 2nd 2,500-3,000 km or 4 months, 3rd 5,000-6,000 km or 8 months, 4th 8,500-9,000 km or 12 months; after the free services, every 3,000 km or 4 months and every 6,000 km or 8 months, whichever comes first. Codes: R replace; I inspect; T top up; C clean; A adjust; DR drain; L lubricate; TI tighten; S set.
Spark plug (clean and adjust at the 1st service; replace)

Engine

Factory

Factory: Periodic maintenance schedule (manual pp.48-50, PDF pp.54-56): replace every 12,000 km. Columns as printed: free services 1st 500-750 km or 2 months, 2nd 2,500-3,000 km or 4 months, 3rd 5,000-6,000 km or 8 months, 4th 8,500-9,000 km or 12 months; after the free services, every 3,000 km or 4 months and every 6,000 km or 8 months, whichever comes first. Codes: R replace; I inspect; T top up; C clean; A adjust; DR drain; L lubricate; TI tighten; S set.
Air cleaner foam and paper elements (replace as a set)

Fuel and air

Factory

Factory: Periodic maintenance schedule (manual pp.48-50, PDF pp.54-56): every 12,000 km. Columns as printed: free services 1st 500-750 km or 2 months, 2nd 2,500-3,000 km or 4 months, 3rd 5,000-6,000 km or 8 months, 4th 8,500-9,000 km or 12 months; after the free services, every 3,000 km or 4 months and every 6,000 km or 8 months, whichever comes first. Codes: R replace; I inspect; T top up; C clean; A adjust; DR drain; L lubricate; TI tighten; S set.
Steering smooth operation and play (inspect and adjust at the 1st service; clean, lubricate with fresh grease and adjust)

Front end

Factory

Factory: Periodic maintenance schedule (manual pp.48-50, PDF pp.54-56): every 12,000 km. Columns as printed: free services 1st 500-750 km or 2 months, 2nd 2,500-3,000 km or 4 months, 3rd 5,000-6,000 km or 8 months, 4th 8,500-9,000 km or 12 months; after the free services, every 3,000 km or 4 months and every 6,000 km or 8 months, whichever comes first. Codes: R replace; I inspect; T top up; C clean; A adjust; DR drain; L lubricate; TI tighten; S set.
Front wheel bearing (lubricate with grease)

Wheels and tires

Factory

Factory: Periodic maintenance schedule (manual pp.48-50, PDF pp.54-56): every 12,000 km. Columns as printed: free services 1st 500-750 km or 2 months, 2nd 2,500-3,000 km or 4 months, 3rd 5,000-6,000 km or 8 months, 4th 8,500-9,000 km or 12 months; after the free services, every 3,000 km or 4 months and every 6,000 km or 8 months, whichever comes first. Codes: R replace; I inspect; T top up; C clean; A adjust; DR drain; L lubricate; TI tighten; S set.

Every 13,000 km or 2 years

1 item

Check and adjust valve clearances

Engine

Guideline

Every 16,000 km or 2 years

2 items

Compression test (or leak-down)

Engine

Guideline
Change gearbox oil

Primary and gearbox

Guideline

Every 19,500 km or 2 years

3 items

Replace air filter element

Fuel and air

Guideline
Synchronize throttle bodies

Fuel and air

Guideline
Grease swingarm pivot

Rear suspension and frame

Guideline

Every 19,500 km or 3 years

1 item

Replace CVT drive belt

Final drive

Guideline

Typical scooter interval, or sooner if the belt is cracked, glazed or below its width limit.

Every 24,000 km or 3 years

1 item

Change fork oil

Front end

Guideline

Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 24,000 km

4 items

Drive belt and CVT rollers (replace)

Engine

Factory

Factory: Periodic maintenance schedule (manual pp.48-50, PDF pp.54-56): every 24,000 km. Columns as printed: free services 1st 500-750 km or 2 months, 2nd 2,500-3,000 km or 4 months, 3rd 5,000-6,000 km or 8 months, 4th 8,500-9,000 km or 12 months; after the free services, every 3,000 km or 4 months and every 6,000 km or 8 months, whichever comes first. Codes: R replace; I inspect; T top up; C clean; A adjust; DR drain; L lubricate; TI tighten; S set.
Clutch shoe (replace)

Primary and gearbox

Factory

Factory: Periodic maintenance schedule (manual pp.48-50, PDF pp.54-56): every 24,000 km. Columns as printed: free services 1st 500-750 km or 2 months, 2nd 2,500-3,000 km or 4 months, 3rd 5,000-6,000 km or 8 months, 4th 8,500-9,000 km or 12 months; after the free services, every 3,000 km or 4 months and every 6,000 km or 8 months, whichever comes first. Codes: R replace; I inspect; T top up; C clean; A adjust; DR drain; L lubricate; TI tighten; S set.
Front fork oil (replace)

Front end

Factory

Factory: Periodic maintenance schedule (manual pp.48-50, PDF pp.54-56): every 24,000 km. Columns as printed: free services 1st 500-750 km or 2 months, 2nd 2,500-3,000 km or 4 months, 3rd 5,000-6,000 km or 8 months, 4th 8,500-9,000 km or 12 months; after the free services, every 3,000 km or 4 months and every 6,000 km or 8 months, whichever comes first. Codes: R replace; I inspect; T top up; C clean; A adjust; DR drain; L lubricate; TI tighten; S set.
Replace brake linings / skim drums (wear based)

Brakes

Guideline

Every 25,500 km or 4 years

1 item

Replace spark plugs

Engine

Guideline

Every 32,000 km or 4 years

2 items

Repack / replace steering head bearings

Front end

Guideline

Many old machines use loose balls in cups and cones. Taper roller conversions are common.
Repack / replace wheel bearings

Wheels and tires

Guideline

Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 38,500 km or 4 years

1 item

Replace fuel filter

Fuel and air

Guideline

Every 40,000 km or 6 years

1 item

Replace swingarm bushes / bearings

Rear suspension and frame

Guideline

Every 48,500 km or 6 years

1 item

Rebuild forks: seals, bushes, springs

Front end

Guideline

Every 6 months

1 item

Clean battery terminals, check charge and strap

Ignition and electrics

Guideline

Every 2 years

3 items

Inspect wiring, bullet connectors and ground points

Ignition and electrics

Guideline
Inspect frame, welds and lugs for cracks

Rear suspension and frame

Guideline
Replace brake fluid

Brakes

Guideline

Every 4 years

4 items

Fuel hose (inspect; replace if required)

Fuel and air

Factory

Factory: Periodic maintenance schedule (manual pp.48-50, PDF pp.54-56): at every service after four years. Columns as printed: free services 1st 500-750 km or 2 months, 2nd 2,500-3,000 km or 4 months, 3rd 5,000-6,000 km or 8 months, 4th 8,500-9,000 km or 12 months; after the free services, every 3,000 km or 4 months and every 6,000 km or 8 months, whichever comes first. Codes: R replace; I inspect; T top up; C clean; A adjust; DR drain; L lubricate; TI tighten; S set.
Replace fuel lines

Fuel and air

Guideline

Old rubber and modern ethanol fuel do not mix well.
Inspect brake hoses; replace old rubber

Brakes

Guideline
Rebuild calipers and master cylinders (seals)

Brakes

Guideline

Every 6 years

1 item

Replace tires on age (regardless of tread)

Wheels and tires

Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.