MotoService Log
No photo of this model in the library yet.
Voge · Overhead-cam four-stroke single, wet sump, gearbox shares engine oil, CVT belt drive

Sfida SR1

Library entry covers 2024-2025

37 factory 46 guideline

Published source

VOGE SR1 Operation Manual, periodic maintenance table printed p.61 (ManualsLib viewer p.65)

Factory source. Covers VOGE SR1 Operation Manual (ManualsLib title; names SR1, not Sfida; no year printed).

83 items for a 2024 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)
Engine cycle
Four-stroke
Engine lubrication
Wet sump (oil in crankcase)
Oil filtration
Replaceable cartridge or spin-on filter
Valve gear
Overhead cam, screw/locknut adjusters
Ignition
Electronic (CDI / transistor / ECU)
Charging
Alternator / stator with rectifier
Battery
Wet cell (flooded lead-acid, needs topping up)
Fuel system
Fuel injection
Cooling
Liquid cooled
Primary drive
Gear or chain inside engine, shares engine oil
Gearbox oil
Shares engine oil
Clutch control
Automatic or semi-automatic
Final drive
Belt CVT, scooter automatic
Front suspension
Telescopic fork
Rear suspension
Swingarm, twin shocks
Front brake
Disc, hydraulic
Rear brake
Disc, hydraulic
Wheels
Cast / alloy, tubeless
Sidecar
No sidecar
Maintenance schedule

2024 Voge Sfida SR1

On the road: every 300 km

1 item
  • Check engine oil level
    Pre-ride / on the road
    Guideline

    Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 500 km

2 items
  • Check lights, horn, brake light switches
    Pre-ride / on the road
    Guideline
  • Check tire pressures
    Pre-ride / on the road
    Guideline

On the road: every 800 km

1 item
  • Check coolant level
    Pre-ride / on the road
    Guideline

Every 1,600 km or 6 months

1 item
  • Inspect tire tread, sidewalls and date codes
    Wheels and tires
    Guideline

Every 5,000 km or 12 months

8 items
  • Check throttle cable(s) free play and return
    Fuel and air
    Guideline
  • Adjust automatic / semi-automatic clutch
    Primary and gearbox
    Guideline
  • Check steering head bearing adjustment
    Front end
    Guideline
  • Inspect fork seals, stanchions and fork boots
    Front end
    Guideline
  • Check footrests, pegs, rear brake and gear lever pivots
    Rear suspension and frame
    Guideline
  • Grease and check center / side stand and springs
    Rear suspension and frame
    Guideline
  • Check brake pads and discs
    Brakes
    Guideline
  • Check wheel bearings for play
    Wheels and tires
    Guideline

Every 6,000 km

26 items
  • Air intake system seals (inspect)
    Engine
    Factory

    Factory: Periodic maintenance table (printed p.61, ManualsLib viewer p.65): I at 1,000 km and every 6,000 km. Columns as printed: first maintenance at 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever comes first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

  • Body fasteners (check tightness)
    Engine
    Factory

    Factory: Periodic maintenance table (printed p.61, ManualsLib viewer p.65): I at 1,000 km and every 6,000 km. Columns as printed: first maintenance at 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever comes first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

  • Coolant level (check)
    Engine
    Factory

    Factory: Periodic maintenance table (printed p.61, ManualsLib viewer p.65): I at 1,000 km and every 6,000 km. Columns as printed: first maintenance at 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever comes first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

  • Engine oil (replace)
    Engine
    Factory

    Factory: Periodic maintenance table (printed p.61, ManualsLib viewer p.65): R at 1,000 km and every 6,000 km. Columns as printed: first maintenance at 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever comes first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

  • Engine oil filter element (replace)
    Engine
    Factory

    Factory: Periodic maintenance table (printed p.61, ManualsLib viewer p.65): R at 1,000 km and every 6,000 km. Columns as printed: first maintenance at 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever comes first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

  • Engine oil level (check)
    Engine
    Factory

    Factory: Periodic maintenance table (printed p.61, ManualsLib viewer p.65): I at 1,000 km and every 6,000 km. Columns as printed: first maintenance at 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever comes first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

  • Spark plug gap (inspect)
    Engine
    Factory

    Factory: Periodic maintenance table (printed p.61, ManualsLib viewer p.65): I at 7,000, 13,000, 25,000 and 31,000 km. Columns as printed: first maintenance at 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever comes first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

  • Throttle body (clean)
    Engine
    Factory

    Factory: Periodic maintenance table (printed p.61, ManualsLib viewer p.65): C every 6,000 km from 7,000 km. Columns as printed: first maintenance at 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever comes first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

  • Valve clearance (inspect)
    Engine
    Factory

    Factory: Periodic maintenance table (printed p.61, ManualsLib viewer p.65): I at 1,000 km and every 6,000 km. Columns as printed: first maintenance at 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever comes first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

  • Fuel evaporation system (check)
    Fuel and air
    Factory

    Factory: Periodic maintenance table (printed p.61, ManualsLib viewer p.65): I at 1,000 km and every 6,000 km. Columns as printed: first maintenance at 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever comes first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

  • Fuel filter (replace)
    Fuel and air
    Factory

    Factory: Periodic maintenance table (printed p.61, ManualsLib viewer p.65): R every 6,000 km from 7,000 km. Columns as printed: first maintenance at 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever comes first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

  • Fuel line seals (check)
    Fuel and air
    Factory

    Factory: Periodic maintenance table (printed p.61, ManualsLib viewer p.65): I at 1,000 km and every 6,000 km. Columns as printed: first maintenance at 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever comes first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

  • Fuel pipe O-ring (replace)
    Fuel and air
    Factory

    Factory: Periodic maintenance table (printed p.61, ManualsLib viewer p.65): change every 6,000 km. Columns as printed: first maintenance at 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever comes first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

  • Battery voltage (check)
    Ignition and electrics
    Factory

    Factory: Periodic maintenance table (printed p.61, ManualsLib viewer p.65): I every 6,000 km from 7,000 km. Columns as printed: first maintenance at 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever comes first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

  • Clutch control system (adjust)
    Primary and gearbox
    Factory

    Factory: Periodic maintenance table (printed p.61, ManualsLib viewer p.65): A at 1,000 km and every 6,000 km; R at 31,000 km. Columns as printed: first maintenance at 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever comes first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

  • Center and side stand pivots (lubricate)
    Rear suspension and frame
    Factory

    Factory: Periodic maintenance table (printed p.61, ManualsLib viewer p.65): L every 6,000 km from 7,000 km. Columns as printed: first maintenance at 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever comes first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

  • Front and rear shock absorber leaks (check)
    Rear suspension and frame
    Factory

    Factory: Periodic maintenance table (printed p.61, ManualsLib viewer p.65): I at 1,000 km and every 6,000 km. Columns as printed: first maintenance at 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever comes first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

  • Rear suspension and swingarm bearings (lubricate)
    Rear suspension and frame
    Factory

    Factory: Periodic maintenance table (printed p.61, ManualsLib viewer p.65): L every 6,000 km from 7,000 km. Columns as printed: first maintenance at 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever comes first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

  • Brake and clutch lever pivots (lubricate)
    Brakes
    Factory

    Factory: Periodic maintenance table (printed p.61, ManualsLib viewer p.65): L every 6,000 km from 7,000 km. Columns as printed: first maintenance at 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever comes first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

  • Brake fluid level (check)
    Brakes
    Factory

    Factory: Periodic maintenance table (printed p.61, ManualsLib viewer p.65): I at 1,000 km and every 6,000 km. Columns as printed: first maintenance at 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever comes first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

  • Brake hose seals (check)
    Brakes
    Factory

    Factory: Periodic maintenance table (printed p.61, ManualsLib viewer p.65): I at 1,000 km and every 6,000 km. Columns as printed: first maintenance at 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever comes first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

  • Brake light switches (check)
    Brakes
    Factory

    Factory: Periodic maintenance table (printed p.61, ManualsLib viewer p.65): I at 1,000 km and every 6,000 km. Columns as printed: first maintenance at 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever comes first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

  • Brake pads, front and rear (inspect)
    Brakes
    Factory

    Factory: Periodic maintenance table (printed p.61, ManualsLib viewer p.65): I at 1,000 km and every 6,000 km. Columns as printed: first maintenance at 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever comes first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

  • Wheel and sprocket carrier bearings (lubricate)
    Wheels and tires
    Factory

    Factory: Periodic maintenance table (printed p.61, ManualsLib viewer p.65): L every 6,000 km from 7,000 km. Columns as printed: first maintenance at 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever comes first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

  • Wheels (inspect)
    Wheels and tires
    Factory

    Factory: Periodic maintenance table (printed p.61, ManualsLib viewer p.65): I at 1,000 km and every 6,000 km. Columns as printed: first maintenance at 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever comes first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

  • Throttle control system (adjust)
    Controls and cables
    Factory

    Factory: Periodic maintenance table (printed p.61, ManualsLib viewer p.65): A at 1,000 km and every 6,000 km; R at 37,000 km. Columns as printed: first maintenance at 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever comes first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

Every 6,500 km or 12 months

2 items
  • Inspect, clean and gap spark plugs
    Engine
    Guideline
  • Inspect CVT drive belt, rollers / sliders and clutch shoes
    Final drive
    Guideline

    Typical scooter interval. Your owner's manual figure governs; check belt width against the service limit.

Every 8,000 km or 12 months

2 items
  • Change engine oil
    Engine
    Guideline

    Pre-1970 machines: many owners run non-detergent or classic-spec oil with no filter, so short intervals matter. Dry sump: drain the tank and the crankcase/sump, flush the tank and clean the feed and return screens.

  • Replace oil filter
    Engine
    Guideline

Every 9,500 km or 12 months

7 items
  • Inspect coolant hoses and clamps
    Engine
    Guideline
  • Clean / inspect air filter
    Fuel and air
    Guideline

    Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.

  • Check charging voltage and regulator / cut-out
    Ignition and electrics
    Guideline
  • Check swingarm bushes for play
    Rear suspension and frame
    Guideline
  • Inspect rear shocks for leaks and damping
    Rear suspension and frame
    Guideline
  • Lubricate control cables and lever pivots
    Controls and cables
    Guideline
  • Lubricate speedometer / tachometer cables, check drive
    Controls and cables
    Guideline

    A dry speedo cable whips the needle and eventually kills the instrument.

Every 12,000 km

7 items
  • Air filter element (clean)
    Fuel and air
    Factory

    Factory: Periodic maintenance table (printed p.61, ManualsLib viewer p.65): I at 1,000 km; C at 7,000, 19,000 and 31,000 km. Columns as printed: first maintenance at 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever comes first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

  • Air filter element (replace)
    Fuel and air
    Factory

    Factory: Periodic maintenance table (printed p.61, ManualsLib viewer p.65): R at 13,000, 25,000 and 37,000 km. Columns as printed: first maintenance at 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever comes first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

  • Fuel pump filter element (inspect)
    Fuel and air
    Factory

    Factory: Periodic maintenance table (printed p.61, ManualsLib viewer p.65): I at 13,000, 25,000 and 37,000 km. Columns as printed: first maintenance at 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever comes first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

  • Steering bearing (inspect)
    Front end
    Factory

    Factory: Periodic maintenance table (printed p.61, ManualsLib viewer p.65): I at 1,000, 19,000 and 31,000 km. Columns as printed: first maintenance at 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever comes first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

  • Steering bearing (lubricate)
    Front end
    Factory

    Factory: Periodic maintenance table (printed p.61, ManualsLib viewer p.65): L at 13,000, 25,000 and 37,000 km. Columns as printed: first maintenance at 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever comes first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

  • Brake pads, front and rear (replace)
    Brakes
    Factory

    Factory: Periodic maintenance table (printed p.61, ManualsLib viewer p.65): R at 13,000, 25,000 and 37,000 km. Columns as printed: first maintenance at 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever comes first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

  • Rear brake caliper guide pin, engine front and rear mount bushings (replace)
    Brakes
    Factory

    Factory: Periodic maintenance table (printed p.61, ManualsLib viewer p.65): change every 12,000 km (one merged cell across these rows). Columns as printed: first maintenance at 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever comes first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

Every 13,000 km or 2 years

1 item
  • Check and adjust valve clearances
    Engine
    Guideline

Every 16,000 km or 2 years

1 item
  • Compression test (or leak-down)
    Engine
    Guideline

Every 18,000 km

1 item
  • Spark plugs (replace)
    Engine
    Factory

    Factory: Periodic maintenance table (printed p.61, ManualsLib viewer p.65): R at 19,000 and 37,000 km. Columns as printed: first maintenance at 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever comes first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

Every 19,500 km or 2 years

3 items
  • Replace air filter element
    Fuel and air
    Guideline
  • Synchronize throttle bodies
    Fuel and air
    Guideline
  • Grease swingarm pivot
    Rear suspension and frame
    Guideline

Every 19,500 km or 3 years

1 item
  • Replace CVT drive belt
    Final drive
    Guideline

    Typical scooter interval, or sooner if the belt is cracked, glazed or below its width limit.

Every 24,000 km or 3 years

1 item
  • Change fork oil
    Front end
    Guideline

    Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 24,000 km

1 item
  • Gearbox oil (replace)
    Primary and gearbox
    Factory

    Factory: Periodic maintenance table (printed p.61, ManualsLib viewer p.65): R at 1,000 and 25,000 km. Columns as printed: first maintenance at 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever comes first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

Every 25,500 km or 4 years

1 item
  • Replace spark plugs
    Engine
    Guideline

Every 32,000 km or 4 years

2 items
  • Repack / replace steering head bearings
    Front end
    Guideline

    Many old machines use loose balls in cups and cones. Taper roller conversions are common.

  • Repack / replace wheel bearings
    Wheels and tires
    Guideline

    Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 38,500 km or 4 years

1 item
  • Replace fuel filter
    Fuel and air
    Guideline

Every 40,000 km or 6 years

1 item
  • Replace swingarm bushes / bearings
    Rear suspension and frame
    Guideline

Every 48,500 km or 6 years

1 item
  • Rebuild forks: seals, bushes, springs
    Front end
    Guideline

Every 6 months

1 item
  • Clean battery terminals, check charge and strap
    Ignition and electrics
    Guideline

Every 2 years

6 items
  • Coolant (replace)
    Engine
    Factory

    Factory: Periodic maintenance table (printed p.61, ManualsLib viewer p.65): every 2 years; R at 37,000 km. Columns as printed: first maintenance at 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever comes first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

  • Replace coolant
    Engine
    Guideline
  • Inspect wiring, bullet connectors and ground points
    Ignition and electrics
    Guideline
  • Inspect frame, welds and lugs for cracks
    Rear suspension and frame
    Guideline
  • Brake fluid (replace)
    Brakes
    Factory

    Factory: Periodic maintenance table (printed p.61, ManualsLib viewer p.65): every 2 years; I at 1,000 km and every 6,000 km. Columns as printed: first maintenance at 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever comes first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

  • Replace brake fluid
    Brakes
    Guideline

Every 4 years

3 items
  • Replace fuel lines
    Fuel and air
    Guideline

    Old rubber and modern ethanol fuel do not mix well.

  • Inspect brake hoses; replace old rubber
    Brakes
    Guideline
  • Rebuild calipers and master cylinders (seals)
    Brakes
    Guideline

Every 6 years

1 item
  • Replace tires on age (regardless of tread)
    Wheels and tires
    Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.

Keep up with this schedule on your phone

Add the bike in the app and this chart loads itself, ready to log against and edit.

Coming soon to Google Play

Other 2024 Voge models

All 2024 Voge