No photo of this model in the library yet.

Have this bike? Send a photo or the manual's service chart

Voge · Overhead-cam four-stroke single, wet sump, gearbox shares engine oil, CVT belt drive

Sfida SR3

Library entry covers 2024-2025

36 factory 46 guideline

Published source

VOGE SR3 2023 Operation Manual, maintenance form list printed p.78 (ManualsLib viewer p.82)

Factory source. Covers VOGE SR3 2023 Operation Manual (ManualsLib title; names SR3, not Sfida); later years not compared.

82 items for a 2025 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)

Engine cycle: Four-stroke
Engine lubrication: Wet sump (oil in crankcase)
Oil filtration: Replaceable cartridge or spin-on filter
Valve gear: Overhead cam, screw/locknut adjusters
Ignition: Electronic (CDI / transistor / ECU)
Charging: Alternator / stator with rectifier
Battery: Wet cell (flooded lead-acid, needs topping up)
Fuel system: Fuel injection
Cooling: Liquid cooled
Primary drive: Gear or chain inside engine, shares engine oil
Gearbox oil: Shares engine oil
Clutch control: Automatic or semi-automatic
Final drive: Belt CVT, scooter automatic
Front suspension: Telescopic fork
Rear suspension: Swingarm, twin shocks
Front brake: Disc, hydraulic
Rear brake: Disc, hydraulic
Wheels: Cast / alloy, tubeless
Sidecar: No sidecar

Maintenance schedule

2025 Voge Sfida SR3

On the road: every 300 km

1 item

Check engine oil level

Pre-ride / on the road

Guideline

Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 500 km

2 items

Check lights, horn, brake light switches

Pre-ride / on the road

Guideline
Check tire pressures

Pre-ride / on the road

Guideline

On the road: every 800 km

1 item

Check coolant level

Pre-ride / on the road

Guideline

Every 1,600 km or 6 months

1 item

Inspect tire tread, sidewalls and date codes

Wheels and tires

Guideline

Every 5,000 km or 6 months

2 items

Engine oil (replace)

Engine

Factory

Factory: Form list for maintenance (operation manual p.78, ManualsLib viewer p.82): first at 1,000 km, then every 5,000 km or half a year. Columns as printed: 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever first. Key: I inspect, C clean, R replace, A adjust, L lubricate.
Secondary oil filter (replace)

Engine

Factory

Factory: Form list for maintenance (operation manual p.78, ManualsLib viewer p.82): together with the engine oil. Columns as printed: 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

Every 5,000 km or 12 months

8 items

Check throttle cable(s) free play and return

Fuel and air

Guideline
Adjust automatic / semi-automatic clutch

Primary and gearbox

Guideline
Check steering head bearing adjustment

Front end

Guideline
Inspect fork seals, stanchions and fork boots

Front end

Guideline
Check footrests, pegs, rear brake and gear lever pivots

Rear suspension and frame

Guideline
Grease and check center / side stand and springs

Rear suspension and frame

Guideline
Check brake pads and discs

Brakes

Guideline
Check wheel bearings for play

Wheels and tires

Guideline

Every 6,000 km

20 items

Air intake system seals (check)

Engine

Factory

Factory: Form list for maintenance (operation manual p.78, ManualsLib viewer p.82): I at 1,000 km and every 6,000 km. Columns as printed: 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever first. Key: I inspect, C clean, R replace, A adjust, L lubricate.
CVT drive belt (inspect)

Engine

Factory

Factory: Form list for maintenance (operation manual p.78, ManualsLib viewer p.82): I at 13,000, 19,000 and 37,000 km. Columns as printed: 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever first. Key: I inspect, C clean, R replace, A adjust, L lubricate.
Coolant level (check)

Engine

Factory

Factory: Form list for maintenance (operation manual p.78, ManualsLib viewer p.82): I at 1,000 km and every 6,000 km. Columns as printed: 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever first. Key: I inspect, C clean, R replace, A adjust, L lubricate.
Engine mount bushings (lubricate)

Engine

Factory

Factory: Form list for maintenance (operation manual p.78, ManualsLib viewer p.82): L every 6,000 km from 7,000 km. Columns as printed: 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever first. Key: I inspect, C clean, R replace, A adjust, L lubricate.
Engine oil level (check)

Engine

Factory

Factory: Form list for maintenance (operation manual p.78, ManualsLib viewer p.82): I at 1,000 km and every 6,000 km. Columns as printed: 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever first. Key: I inspect, C clean, R replace, A adjust, L lubricate.
Gear oil (check)

Engine

Factory

Factory: Form list for maintenance (operation manual p.78, ManualsLib viewer p.82): I at 1,000 km and every 6,000 km. Columns as printed: 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever first. Key: I inspect, C clean, R replace, A adjust, L lubricate.
Key fasteners (check)

Engine

Factory

Factory: Form list for maintenance (operation manual p.78, ManualsLib viewer p.82): I at 1,000 km and every 6,000 km. Columns as printed: 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever first. Key: I inspect, C clean, R replace, A adjust, L lubricate.
Spark plug gap (check)

Engine

Factory

Factory: Form list for maintenance (operation manual p.78, ManualsLib viewer p.82): I at 7,000, 13,000, 25,000 and 31,000 km. Columns as printed: 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever first. Key: I inspect, C clean, R replace, A adjust, L lubricate.
Throttle operation system (adjust)

Engine

Factory

Factory: Form list for maintenance (operation manual p.78, ManualsLib viewer p.82): A at 1,000 km and every 6,000 km; R at 37,000 km. Columns as printed: 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever first. Key: I inspect, C clean, R replace, A adjust, L lubricate.
Valve clearance (check)

Engine

Factory

Factory: Form list for maintenance (operation manual p.78, ManualsLib viewer p.82): I at 1,000 km and every 6,000 km. Columns as printed: 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever first. Key: I inspect, C clean, R replace, A adjust, L lubricate.
Fuel evaporation system (check)

Fuel and air

Factory

Factory: Form list for maintenance (operation manual p.78, ManualsLib viewer p.82): I at 1,000 km and every 6,000 km. Columns as printed: 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever first. Key: I inspect, C clean, R replace, A adjust, L lubricate.
Fuel line seals (check)

Fuel and air

Factory

Factory: Form list for maintenance (operation manual p.78, ManualsLib viewer p.82): I at 1,000 km and every 6,000 km. Columns as printed: 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever first. Key: I inspect, C clean, R replace, A adjust, L lubricate.
Battery voltage (check)

Ignition and electrics

Factory

Factory: Form list for maintenance (operation manual p.78, ManualsLib viewer p.82): I every 6,000 km from 7,000 km. Columns as printed: 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever first. Key: I inspect, C clean, R replace, A adjust, L lubricate.
Front and rear shock absorber leaks (check)

Rear suspension and frame

Factory

Factory: Form list for maintenance (operation manual p.78, ManualsLib viewer p.82): I at 1,000 km and every 6,000 km. Columns as printed: 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever first. Key: I inspect, C clean, R replace, A adjust, L lubricate.
Main and side stands (lubricate)

Rear suspension and frame

Factory

Factory: Form list for maintenance (operation manual p.78, ManualsLib viewer p.82): L every 6,000 km from 7,000 km. Columns as printed: 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever first. Key: I inspect, C clean, R replace, A adjust, L lubricate.
Brake fluid level (check)

Brakes

Factory

Factory: Form list for maintenance (operation manual p.78, ManualsLib viewer p.82): I at 1,000 km and every 6,000 km. Columns as printed: 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever first. Key: I inspect, C clean, R replace, A adjust, L lubricate.
Brake lever shafts (lubricate)

Brakes

Factory

Factory: Form list for maintenance (operation manual p.78, ManualsLib viewer p.82): L every 6,000 km from 7,000 km. Columns as printed: 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever first. Key: I inspect, C clean, R replace, A adjust, L lubricate.
Brake line seals (check)

Brakes

Factory

Factory: Form list for maintenance (operation manual p.78, ManualsLib viewer p.82): I at 1,000 km and every 6,000 km. Columns as printed: 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever first. Key: I inspect, C clean, R replace, A adjust, L lubricate.
Front and rear brake switches (check)

Brakes

Factory

Factory: Form list for maintenance (operation manual p.78, ManualsLib viewer p.82): I at 1,000 km and every 6,000 km. Columns as printed: 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever first. Key: I inspect, C clean, R replace, A adjust, L lubricate.
Front and rear wheel bearings (lubricate)

Wheels and tires

Factory

Factory: Form list for maintenance (operation manual p.78, ManualsLib viewer p.82): L every 6,000 km from 7,000 km. Columns as printed: 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

Every 6,500 km or 12 months

2 items

Inspect, clean and gap spark plugs

Engine

Guideline
Inspect CVT drive belt, rollers / sliders and clutch shoes

Final drive

Guideline

Typical scooter interval. Your owner's manual figure governs; check belt width against the service limit.

Every 8,000 km or 12 months

2 items

Change engine oil

Engine

Guideline

Pre-1970 machines: many owners run non-detergent or classic-spec oil with no filter, so short intervals matter. Dry sump: drain the tank and the crankcase/sump, flush the tank and clean the feed and return screens.
Replace oil filter

Engine

Guideline

Every 9,500 km or 12 months

7 items

Inspect coolant hoses and clamps

Engine

Guideline
Clean / inspect air filter

Fuel and air

Guideline

Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
Check charging voltage and regulator / cut-out

Ignition and electrics

Guideline
Check swingarm bushes for play

Rear suspension and frame

Guideline
Inspect rear shocks for leaks and damping

Rear suspension and frame

Guideline
Lubricate control cables and lever pivots

Controls and cables

Guideline
Lubricate speedometer / tachometer cables, check drive

Controls and cables

Guideline

A dry speedo cable whips the needle and eventually kills the instrument.

Every 12,000 km

8 items

CVT (wash and inspect)

Engine

Factory

Factory: Form list for maintenance (operation manual p.78, ManualsLib viewer p.82): I at 13,000, 25,000 and 37,000 km. Columns as printed: 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever first. Key: I inspect, C clean, R replace, A adjust, L lubricate.
CVT pulley (replace)

Engine

Factory

Factory: Form list for maintenance (operation manual p.78, ManualsLib viewer p.82): R at 13,000, 25,000 and 37,000 km; I at 7,000, 19,000 and 31,000 km. Columns as printed: 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever first. Key: I inspect, C clean, R replace, A adjust, L lubricate.
Throttle body (check)

Engine

Factory

Factory: Form list for maintenance (operation manual p.78, ManualsLib viewer p.82): I at 13,000, 25,000 and 37,000 km. Columns as printed: 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever first. Key: I inspect, C clean, R replace, A adjust, L lubricate.
Air filter element (clean)

Fuel and air

Factory

Factory: Form list for maintenance (operation manual p.78, ManualsLib viewer p.82): I at 1,000 km; C at 7,000, 19,000 and 31,000 km. Columns as printed: 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever first. Key: I inspect, C clean, R replace, A adjust, L lubricate.
Air filter element (replace)

Fuel and air

Factory

Factory: Form list for maintenance (operation manual p.78, ManualsLib viewer p.82): R at 13,000, 25,000 and 37,000 km. Columns as printed: 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever first. Key: I inspect, C clean, R replace, A adjust, L lubricate.
Fuel filter element (check)

Fuel and air

Factory

Factory: Form list for maintenance (operation manual p.78, ManualsLib viewer p.82): I at 13,000, 25,000 and 37,000 km. Columns as printed: 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever first. Key: I inspect, C clean, R replace, A adjust, L lubricate.
CVT clutch shoes and rollers (replace)

Primary and gearbox

Factory

Factory: Form list for maintenance (operation manual p.78, ManualsLib viewer p.82): R at 13,000, 25,000 and 37,000 km; I at 7,000, 19,000 and 31,000 km. Columns as printed: 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever first. Key: I inspect, C clean, R replace, A adjust, L lubricate.
Steering bearing (lubricate)

Front end

Factory

Factory: Form list for maintenance (operation manual p.78, ManualsLib viewer p.82): L at 13,000, 25,000 and 37,000 km; I at the services between. Columns as printed: 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

Every 13,000 km or 2 years

1 item

Check and adjust valve clearances

Engine

Guideline

Every 16,000 km or 2 years

1 item

Compression test (or leak-down)

Engine

Guideline

Every 18,000 km

1 item

Spark plug (replace)

Engine

Factory

Factory: Form list for maintenance (operation manual p.78, ManualsLib viewer p.82): R at 19,000 and 37,000 km. Columns as printed: 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

Every 19,500 km or 2 years

3 items

Replace air filter element

Fuel and air

Guideline
Synchronize throttle bodies

Fuel and air

Guideline
Grease swingarm pivot

Rear suspension and frame

Guideline

Every 19,500 km or 3 years

1 item

Replace CVT drive belt

Final drive

Guideline

Typical scooter interval, or sooner if the belt is cracked, glazed or below its width limit.

Every 24,000 km or 3 years

1 item

Change fork oil

Front end

Guideline

Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 24,000 km

2 items

CVT drive belt (replace)

Engine

Factory

Factory: Form list for maintenance (operation manual p.78, ManualsLib viewer p.82): R at 25,000 km. Columns as printed: 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever first. Key: I inspect, C clean, R replace, A adjust, L lubricate.
Gear oil (replace)

Engine

Factory

Factory: Form list for maintenance (operation manual p.78, ManualsLib viewer p.82): R at 25,000 km. Columns as printed: 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

Every 25,500 km or 4 years

1 item

Replace spark plugs

Engine

Guideline

Every 32,000 km or 4 years

2 items

Repack / replace steering head bearings

Front end

Guideline

Many old machines use loose balls in cups and cones. Taper roller conversions are common.
Repack / replace wheel bearings

Wheels and tires

Guideline

Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 38,500 km or 4 years

1 item

Replace fuel filter

Fuel and air

Guideline

Every 40,000 km or 6 years

1 item

Replace swingarm bushes / bearings

Rear suspension and frame

Guideline

Every 48,500 km or 6 years

1 item

Rebuild forks: seals, bushes, springs

Front end

Guideline

Every 6 months

1 item

Clean battery terminals, check charge and strap

Ignition and electrics

Guideline

Every 2 years

6 items

Coolant (replace)

Engine

Factory

Factory: Form list for maintenance (operation manual p.78, ManualsLib viewer p.82): every 2 years; R at 37,000 km. Columns as printed: 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever first. Key: I inspect, C clean, R replace, A adjust, L lubricate.
Replace coolant

Engine

Guideline
Inspect wiring, bullet connectors and ground points

Ignition and electrics

Guideline
Inspect frame, welds and lugs for cracks

Rear suspension and frame

Guideline
Brake fluid (replace)

Brakes

Factory

Factory: Form list for maintenance (operation manual p.78, ManualsLib viewer p.82): every 2 years; I I at 1,000 km and every 6,000 km. Columns as printed: 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever first. Key: I inspect, C clean, R replace, A adjust, L lubricate.
Replace brake fluid

Brakes

Guideline

Every 4 years

3 items

Replace fuel lines

Fuel and air

Guideline

Old rubber and modern ethanol fuel do not mix well.
Inspect brake hoses; replace old rubber

Brakes

Guideline
Rebuild calipers and master cylinders (seals)

Brakes

Guideline

Every 6 years

1 item

Replace tires on age (regardless of tread)

Wheels and tires

Guideline

No interval set

1 item

Front and rear brake pads (check)

Brakes

Factory

Factory: Form list for maintenance (operation manual p.78, ManualsLib viewer p.82): pads must not wear past the minimum limit. Columns as printed: 1,000 km, then every 6,000 km (7,000, 13,000 ... 37,000 km), time or mileage whichever first. Key: I inspect, C clean, R replace, A adjust, L lubricate.

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.