
Midnight Warrior (1672 cc)
Library entry covers 2006-2009
Published source
Yamaha 2007 Midnight Warrior XV17PCW(C)/XV17PCMW(C) Owner's Manual LIT-11626-20-22 (5PX-28199-15), Periodic maintenance charts pp.6-3 to 6-7
Factory owner's handbook. Covers 2007 (XV17PCW / XV17PCMW, US owner's manual LIT-11626-20-22, printed May 2006); chart identical to 2006.
Open the source48 items for a 2007 model, grouped by interval the way a factory chart is laid out.
How this bike is built (what the schedule is based on)
- Engine cycle
- Four-stroke
- Engine lubrication
- Wet sump (oil in crankcase)
- Oil filtration
- Replaceable cartridge or spin-on filter
- Valve gear
- Overhead valve, pushrods, adjustable tappets
- Ignition
- Electronic (CDI / transistor / ECU)
- Charging
- Alternator / stator with rectifier
- Battery
- Wet cell (flooded lead-acid, needs topping up)
- Fuel system
- Fuel injection
- Cooling
- Air / oil cooled
- Primary drive
- Gear or chain inside engine, shares engine oil
- Gearbox oil
- Shares engine oil
- Clutch control
- Hand lever, cable
- Final drive
- Toothed belt
- Front suspension
- Telescopic fork
- Rear suspension
- Swingarm, single shock / cantilever
- Front brake
- Disc, hydraulic
- Rear brake
- Disc, hydraulic
- Wheels
- Cast / alloy, tubeless
- Sidecar
- No sidecar
2007 Yamaha Midnight Warrior (1672 cc)
On the road: every 200 mi
1 item-
Check engine oil levelPre-ride / on the roadGuideline
Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.
On the road: every 300 mi
2 items-
Check lights, horn, brake light switchesPre-ride / on the roadGuideline
-
Check tire pressuresPre-ride / on the roadGuideline
Every 2,500 mi
1 item-
Inspect drive belt, pulleys and tensionFinal driveFactory
Manual: Drive belt (check tension, adjust). Factory: Initial, then every 2500 mi (4000 km)
Every 3,000 mi or 12 months
1 item-
Check footrests, pegs, rear brake and gear lever pivotsRear suspension and frameGuideline
Every 4,000 mi or 6 months
16 items-
Change engine oilEngineFactory
Manual: Engine oil (change, warm engine before draining). Factory: Cols 600mi(1000km)/1mo initial, then 4000mi(7000km)/6mo spacing to 20000mi
-
Chassis fasteners (check all fittings and fasteners)EngineFactory
Factory: 4000mi columns
-
Check engine breather and oil returnEngineFactory
Manual: Crankcase breather system (check hose, replace if necessary). Factory: 4000mi columns
-
Exhaust system (check for leakage, tighten, replace gaskets)EngineFactory
Factory: 4000mi columns
-
Check throttle cable(s) free play and returnFuel and airFactory
Manual: Throttle grip housing and cable (check free play, lubricate). Factory: 4000mi columns
-
Replace air filter elementFuel and airFactory
Manual: Air filter elements (check condition, replace if necessary). Factory: 4000mi(7000km)/6mo columns; disposable oil-coated paper elements
-
Synchronize throttle bodiesFuel and airFactory
Manual: Fuel injection (check and adjust idle speed and synchronization). Factory: Every column incl. initial; from 24000mi repeat from 8000mi
-
Adjust clutch free play, lubricate cable and lever pivotPrimary and gearboxFactory
Manual: Clutch (check operation, adjust or replace cable). Factory: Every column incl. initial
-
Check steering head bearing adjustmentFront endFactory
Manual: Steering bearings (check assemblies for looseness). Factory: Every column incl. initial; repack at 16000mi
-
Inspect fork seals, stanchions and fork bootsFront endFactory
Manual: Front fork (check operation and oil leakage). Factory: 4000mi columns
-
Grease and check center / side stand and springsRear suspension and frameFactory
Manual: Sidestand pivot (check operation, lubricate). Factory: 4000mi columns
-
Inspect rear shocks for leaks and dampingRear suspension and frameFactory
Manual: Shock absorber assembly (check operation and oil leakage). Factory: 4000mi columns
-
Check brake pads and discsBrakesFactory
Manual: Front/rear brake (check operation, fluid level, leakage; pads). Factory: Every column incl. initial
-
Check wheel bearings for playWheels and tiresFactory
Manual: Wheel bearings (check smooth operation). Factory: 4000mi columns
-
Inspect tire tread, sidewalls and date codesWheels and tiresFactory
Manual: Tires (check tread depth, damage, pressure). Factory: 4000mi columns
-
Lubricate control cables and lever pivotsControls and cablesFactory
Manual: Control cables (apply chain and cable lube or engine oil). Factory: Every column incl. initial
Every 6,000 mi or 12 months
4 items-
Clean / inspect air filterFuel and airGuideline
Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
-
Check charging voltage and regulator / cut-outIgnition and electricsGuideline
-
Check swingarm bushes for playRear suspension and frameGuideline
-
Lubricate speedometer / tachometer cables, check driveControls and cablesGuideline
A dry speedo cable whips the needle and eventually kills the instrument.
Every 8,000 mi or 12 months
3 items-
Inspect, clean and gap spark plugsEngineFactory
Manual: Spark plugs (check condition, adjust gap and clean). Factory: Checked at 4000mi, 12000mi, 20000mi
-
Replace oil filterEngineFactory
Manual: Engine oil filter cartridge (replace). Factory: Marked initial, 8000mi and 16000mi
-
Replace spark plugsEngineFactory
Manual: Spark plugs (replace). Factory: Replace every 8000 mi (13000 km) or 12 months
Every 10,000 mi or 2 years
1 item-
Compression test (or leak-down)EngineGuideline
Every 15,000 mi or 3 years
1 item-
Change fork oilFront endGuideline
Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.
Every 16,000 mi or 2 years
4 items-
Change final drive (rear drive) oilFinal driveFactory
Manual: Transfer case oil (check leakage, change). Factory: Change at initial, then every 16000mi (25000km) or 24 months
-
Repack / replace steering head bearingsFront endFactory
Manual: Steering bearings (moderately repack, lithium-soap grease). Factory: Every 16000 mi (25000 km) or 24 months
-
Clean and grease rear suspension linkageRear suspension and frameFactory
Manual: Rear suspension link pivots (apply lithium-soap grease). Factory: Marked at 16000mi (25000km) / 24 months
-
Grease swingarm pivotRear suspension and frameFactory
Manual: Swingarm pivot bearings (check, moderately repack lithium-soap grease). Factory: Check at 8000mi; repack at 16000mi (25000km)/24 months
Every 16,000 mi
1 item-
Check and adjust valve clearancesEngineFactory
Manual: Valve clearance (check and adjust when engine is cold). Factory: Every 16000 mi (25000 km)
Every 20,000 mi or 4 years
1 item-
Repack / replace wheel bearingsWheels and tiresGuideline
Cup-and-cone and taper roller hubs need periodic repacking and adjustment.
Every 24,000 mi or 4 years
1 item-
Replace fuel filterFuel and airGuideline
Every 25,000 mi or 6 years
1 item-
Replace swingarm bushes / bearingsRear suspension and frameGuideline
Every 30,000 mi or 6 years
1 item-
Rebuild forks: seals, bushes, springsFront endGuideline
Every 50,000 mi
1 item-
Replace drive belt (wear or damage based)Final driveGuideline
Every 6 months
1 item-
Clean battery terminals, check charge and strapIgnition and electricsGuideline
Every 2 years
4 items-
Inspect wiring, bullet connectors and ground pointsIgnition and electricsGuideline
-
Inspect frame, welds and lugs for cracksRear suspension and frameGuideline
-
Rebuild calipers and master cylinders (seals)BrakesFactory
Manual: Brake master cylinder and caliper internal components (replace). Factory: Every two years, with brake fluid change (NOTE)
-
Replace brake fluidBrakesFactory
Manual: Brake fluid (change). Factory: Every two years (NOTE under chart)
Every 4 years
2 items-
Replace fuel linesFuel and airGuideline
Old rubber and modern ethanol fuel do not mix well.
-
Inspect brake hoses; replace old rubberBrakesFactory
Manual: Brake hoses (replace). Factory: Every 4 years
Every 6 years
1 item-
Replace tires on age (regardless of tread)Wheels and tiresGuideline
Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.
Keep up with this schedule on your phone
Add the bike in the app and this chart loads itself, ready to log against and edit.



