MotoService Log
Yamaha Slider (49 cc)
Example photo: Leineabstiegsschleuse, Public domain, Wikimedia Commons
Yamaha · Two-stroke single, oil injection, CVT belt drive

Slider (49 cc)

Library entry covers 2006-2016

26 factory 34 guideline

Published source

Yamaha EW50 Slider 2003 Owner's Manual 5WK-F8199-E0 (UK, English), periodic maintenance and lubrication chart pp.6-2 to 6-4

Factory owner's handbook. Covers EW50 Slider (49 cc); 2003 UK owner's manual 5WK-F8199-E0, English. Chart columns 1/6/12/18/24 x1000 km plus annual check (km only, no mile figures printed); from 30000 km repeat the intervals starting from 6000 km; annual checks every year unless a km-based maintenance is performed instead. Two-stroke with Autolube oil injection: no engine oil, oil filter or valve rows.

Open the source

60 items for a 2016 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)
Engine cycle
Two-stroke
Engine lubrication
Two-stroke oil injection (Autolube, Injectolube, Pilgrim pump...)
Oil filtration
None (no filter)
Valve gear
None (two-stroke porting)
Ignition
Electronic (CDI / transistor / ECU)
Charging
Alternator / stator with rectifier
Battery
Wet cell (flooded lead-acid, needs topping up)
Fuel system
Single carburetor
Cooling
Air / oil cooled
Primary drive
Gear or chain inside engine, shares engine oil
Gearbox oil
Separate gearbox oil
Clutch control
Automatic or semi-automatic
Final drive
Belt CVT, scooter automatic
Front suspension
Telescopic fork
Rear suspension
Swingarm, twin shocks
Front brake
Disc, hydraulic
Rear brake
Drum (or band / belt rim)
Wheels
Spoked, tubed
Sidecar
No sidecar
Maintenance schedule

2016 Yamaha Slider (49 cc)

On the road: every 200 km

1 item
  • Check two-stroke oil tank / carry premix oil
    Pre-ride / on the road
    Guideline

    Running a two-stroke out of oil seizes it. Injection bikes: check the tank. Premix: carry oil and a measure.

On the road: every 500 km

2 items
  • Check lights, horn, brake light switches
    Pre-ride / on the road
    Guideline
  • Check tire pressures
    Pre-ride / on the road
    Guideline

Every 3,000 km or 12 months

1 item
  • Replace spark plugs (two-stroke)
    Engine
    Guideline

Every 5,000 km or 12 months

5 items
  • Clean fuel tap filter / sediment bowl
    Fuel and air
    Guideline
  • Adjust automatic / semi-automatic clutch
    Primary and gearbox
    Guideline
  • Inspect fork seals, stanchions and fork boots
    Front end
    Guideline
  • Check footrests, pegs, rear brake and gear lever pivots
    Rear suspension and frame
    Guideline
  • Check spoke tension and wheel true
    Wheels and tires
    Guideline

Every 5,000 km or 2 years

1 item
  • Decarbonize exhaust ports, pipes and baffles
    Engine
    Guideline

    Two-strokes coke up the exhaust port and muffler baffles; power falls off gradually.

Every 6,000 km or 12 months

13 items
  • Chassis fasteners (make sure all nuts, bolts and screws are properly tightened)
    Engine
    Factory

    Factory: Marked 6000-24000 km; annual check; dealer item (p.6-3)

  • Lights, signals and switches (check operation, adjust headlight beam)
    Engine
    Factory

    Factory: Every column incl. 1000 km initial; annual check; dealer item (p.6-4)

  • Replace spark plugs
    Engine
    Factory

    Manual: Spark plug (replace). Factory: Replace marked at 6000, 12000, 18000, 24000 km; not at 1000 km; annual check marked; no separate inspect row (p.6-2)

  • Carburetor (adjust engine idling speed)
    Fuel and air
    Factory

    Factory: Every column incl. 1000 km initial; annual check; dealer item (p.6-3)

  • Check throttle cable(s) free play and return
    Fuel and air
    Factory

    Manual: Throttle grip housing and cable (check operation and free play, adjust cable free play if necessary, lubricate grip housing and cable). Factory: Marked 6000-24000 km; annual check; dealer item (p.6-4)

  • Replace fuel lines
    Fuel and air
    Factory

    Manual: Fuel line (check fuel hoses and vacuum hose for cracks or damage). Factory: Marked 6000-24000 km; not at 1000 km; annual check; dealer item (p.6-2)

  • Battery (check electrolyte level and specific gravity, check breather hose routing)
    Ignition and electrics
    Factory

    Factory: Marked 6000-24000 km; annual check; dealer item (p.6-2)

  • Grease and check center / side stand and springs
    Rear suspension and frame
    Factory

    Manual: Centerstand (check operation, lubricate). Factory: Marked 6000-24000 km; annual check (p.6-3)

  • Adjust rear drum brake and rod / cable linkage
    Brakes
    Factory

    Manual: Rear brake (check operation and adjust brake lever freeplay; replace brake shoes whenever worn to the limit). Factory: Every column incl. 1000 km initial; annual check; shoes replaced whenever worn to the limit; dealer item (p.6-2)

  • Check brake pads and discs
    Brakes
    Factory

    Manual: Front brake (check operation, fluid level and vehicle for fluid leakage; replace brake pads whenever worn to the limit). Factory: Hydraulic front brake. Check every column incl. 1000 km initial; annual check; pads replaced whenever worn to the limit; dealer item (p.6-2)

  • Front and rear brake switches (check operation)
    Brakes
    Factory

    Factory: Every column incl. 1000 km initial; annual check; dealer item (p.6-4)

  • Inspect tire tread, sidewalls and date codes
    Wheels and tires
    Factory

    Manual: Tires (check tread depth and for damage, replace if necessary, check and correct air pressure). Factory: Marked 6000-24000 km; annual check; dealer item (p.6-3)

  • Lubricate control cables and lever pivots
    Controls and cables
    Factory

    Manual: Moving parts and cables (lubricate). Factory: Marked 6000-24000 km; annual check (p.6-4)

Every 6,000 km

5 items
  • Check steering head bearing adjustment
    Front end
    Factory

    Manual: Steering bearings (check bearing play and steering for roughness). Factory: Marked at 1000, 6000, 12000, 18000, 24000 km; no annual check; dealer item (p.6-3)

  • Front fork (check operation and for oil leakage)
    Front end
    Factory

    Factory: Marked 6000-24000 km; no annual check; no fork oil change interval printed; dealer item (p.6-3)

  • Inspect rear shocks for leaks and damping
    Rear suspension and frame
    Factory

    Manual: Rear shock absorber assembly (check operation and shock absorber for oil leakage). Factory: Marked 6000-24000 km; no annual check; dealer item (p.6-3)

  • Check wheel bearings for play
    Wheels and tires
    Factory

    Manual: Wheel bearings (check bearing for looseness or damage). Factory: Marked 6000-24000 km; no annual check; dealer item (p.6-3)

  • Wheels (check runout and for damage)
    Wheels and tires
    Factory

    Factory: Marked 6000-24000 km; no annual check; dealer item (p.6-2)

Every 6,500 km or 12 months

4 items
  • Check / bleed / adjust oil injection pump cable
    Engine
    Guideline
  • Inspect, clean and gap spark plugs
    Engine
    Guideline
  • Inspect CVT drive belt, rollers / sliders and clutch shoes
    Final drive
    Guideline

    Typical scooter interval. Your owner's manual figure governs; check belt width against the service limit.

  • Lubricate brake cam spindles, check linings and drums
    Brakes
    Guideline

Every 9,500 km or 12 months

4 items
  • Clean carburetor float bowl(s), check float level and jets
    Fuel and air
    Guideline

    Ethanol fuel varnishes old carbs quickly in storage.

  • Check charging voltage and regulator / cut-out
    Ignition and electrics
    Guideline
  • Check swingarm bushes for play
    Rear suspension and frame
    Guideline
  • Lubricate speedometer / tachometer cables, check drive
    Controls and cables
    Guideline

    A dry speedo cable whips the needle and eventually kills the instrument.

Every 10,000 km

1 item
  • Replace drive belt (wear or damage based)
    Final drive
    Factory

    Manual: V-belt (replace). Factory: Every 10000 km, printed as text; no belt inspection row; dealer item (p.6-3)

Every 12,000 km or 12 months

1 item
  • Autolube pump (check operation, bleed if necessary)
    Engine
    Factory

    Factory: Two-stroke oil injection pump. Marked at 1000, 12000 and 24000 km (not 6000 or 18000 km); annual check; dealer item (p.6-3)

Every 12,000 km

3 items
  • Clean / inspect air filter
    Fuel and air
    Factory

    Manual: Air filter element (clean). Factory: Clean marked at 6000 and 18000 km only (alternating with replace); with the repeat-from-6000 km rule this is every 12000 km offset by 6000 km; no annual check. NOTE: more frequent service in unusually wet or dusty areas (pp.6-2, 6-4)

  • Replace air filter element
    Fuel and air
    Factory

    Manual: Air filter element (replace). Factory: Replace marked at 12000 and 24000 km; no annual check; more frequent service in unusually wet or dusty areas (pp.6-2, 6-4)

  • Change final drive (rear drive) oil
    Final drive
    Factory

    Manual: Final transmission oil (change). Factory: Change marked at 1000 km initial, 12000 and 24000 km; check vehicle for oil leakage marked at 1000, 6000 and 18000 km; no annual check (p.6-3)

Every 16,000 km or 2 years

2 items
  • Compression test (or leak-down)
    Engine
    Guideline
  • Change gearbox oil
    Primary and gearbox
    Guideline

Every 19,500 km or 2 years

1 item
  • Grease swingarm pivot
    Rear suspension and frame
    Guideline

Every 19,500 km or 3 years

1 item
  • Replace CVT drive belt
    Final drive
    Guideline

    Typical scooter interval, or sooner if the belt is cracked, glazed or below its width limit.

Every 24,000 km or 3 years

1 item
  • Change fork oil
    Front end
    Guideline

    Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 24,000 km

2 items
  • Repack / replace steering head bearings
    Front end
    Factory

    Manual: Steering bearings (lubricate with lithium-soap-based grease). Factory: Every 24000 km, printed as text; dealer item (p.6-3)

  • Replace brake linings / skim drums (wear based)
    Brakes
    Guideline

Every 32,000 km or 4 years

1 item
  • Repack / replace wheel bearings
    Wheels and tires
    Guideline

    Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 40,000 km or 6 years

1 item
  • Replace swingarm bushes / bearings
    Rear suspension and frame
    Guideline

Every 48,500 km or 6 years

1 item
  • Rebuild forks: seals, bushes, springs
    Front end
    Guideline

Every 6 months

1 item
  • Clean battery terminals, check charge and strap
    Ignition and electrics
    Guideline

Every 2 years

3 items
  • Inspect wiring, bullet connectors and ground points
    Ignition and electrics
    Guideline
  • Inspect frame, welds and lugs for cracks
    Rear suspension and frame
    Guideline
  • Replace brake fluid
    Brakes
    Factory

    Manual: Brake fluid (change). Factory: From the hydraulic brake service NOTE under the chart: every two years change the brake fluid; regularly check and correct fluid level; not a chart row (p.6-4)

Every 4 years

3 items
  • Replace oil injection delivery lines
    Engine
    Guideline
  • Inspect brake hoses; replace old rubber
    Brakes
    Factory

    Manual: Brake hose (replace). Factory: Every 4 years (also NOTE: replace if cracked or damaged); check for cracks or damage marked 6000-24000 km and annually; dealer item (pp.6-2, 6-4)

  • Rebuild calipers and master cylinders (seals)
    Brakes
    Guideline

Every 6 years

2 items
  • Replace inner tubes and rim tape with tires
    Wheels and tires
    Guideline
  • Replace tires on age (regardless of tread)
    Wheels and tires
    Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.

Keep up with this schedule on your phone

Add the bike in the app and this chart loads itself, ready to log against and edit.

Coming soon to Google Play

Other 2016 Yamaha models

All 2016 Yamaha