No photo of this model in the library yet.

Have this bike? Send a photo or the manual's service chart

Yamaha · Hydraulic-lifter four-stroke twin, dry sump, gearbox shares engine oil, belt drive

Star Venture (1854 cc)

Library entry covers 2018-2022

42 factory 24 guideline

Published source

Yamaha XV1900FD Star Venture 2020 Owner's Manual 2DF-28199-12 / LIT-11626-33-01 (US, English), periodic maintenance charts pp.9-3 to 9-8

Factory owner's handbook. Covers XV1900FD Star Venture; 2020 US owner's manual 2DF-28199-12 (LIT-11626-33-01), English. Chart columns: initial 600 mi (1000 km) or 1 month, then 4000/8000/12000/16000/20000 mi (7000/13000/19000/25000/31000 km) or 6/12/18/24/30 months, whichever comes first; from 24000 mi (37000 km) or 36 months repeat starting from the 8000 mi (13000 km) or 12 month column.

66 items for a 2022 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)

Engine cycle: Four-stroke
Engine lubrication: Dry sump (separate oil tank)
Oil filtration: Replaceable cartridge or spin-on filter
Valve gear: Hydraulic lifters (no routine clearance adjustment)
Ignition: Electronic (CDI / transistor / ECU)
Charging: Alternator / stator with rectifier
Battery: Wet cell (flooded lead-acid, needs topping up)
Fuel system: Fuel injection
Cooling: Air / oil cooled
Primary drive: Gear or chain inside engine, shares engine oil
Gearbox oil: Shares engine oil
Clutch control: Hand lever, cable
Final drive: Toothed belt
Front suspension: Telescopic fork
Rear suspension: Swingarm, single shock / cantilever
Front brake: Disc, hydraulic
Rear brake: Disc, hydraulic
Wheels: Cast / alloy, tubeless
Sidecar: No sidecar

Maintenance schedule

2022 Yamaha Star Venture (1854 cc)

On the road: every 200 mi

1 item

Check engine oil level

Pre-ride / on the road

Guideline

Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 300 mi

2 items

Check lights, horn, brake light switches

Pre-ride / on the road

Guideline
Check tire pressures

Pre-ride / on the road

Guideline

Every 2,500 mi

1 item

Inspect drive belt, pulleys and tension

Final drive

Factory

Manual: Drive belt (check condition and tension, replace if damaged, adjust if necessary). Factory: At 600 mi (1000 km) / 1 month initial, then every 2500 mi (4000 km), printed as text; no belt replacement interval printed; dealer item

Every 3,000 mi or 12 months

2 items

Inspect fork seals, stanchions and fork boots

Front end

Guideline
Check footrests, pegs, rear brake and gear lever pivots

Rear suspension and frame

Guideline

Every 4,000 mi or 6 months

27 items

Change engine oil

Engine

Factory

Manual: Engine oil (change, warm engine before draining). Factory: Every column incl. 600 mi (1000 km) / 1 month initial
Chassis fasteners (check all chassis fittings and fasteners, correct if necessary)

Engine

Factory

Factory: Marked 4000-20000 mi or 6-30 months; dealer item
Check engine breather and oil return

Engine

Factory

Manual: Crankcase breather system (check breather hose for cracks or damage, replace if necessary). Factory: Marked 4000-20000 mi or 6-30 months; not at initial; dealer item
Diagnostic system check (dynamic inspection with Yamaha diagnostic tool, check error codes)

Engine

Factory

Factory: Every column incl. 600 mi (1000 km) / 1 month initial; dealer item
Exhaust system (check for leakage, tighten if necessary, replace gasket(s) if necessary)

Engine

Factory

Factory: Marked 4000-20000 mi (7000-31000 km) or 6-30 months; not at 600 mi initial; dealer item (p.9-4)
Lights, signals and switches (check operation, adjust headlight beam)

Engine

Factory

Factory: Every column incl. 600 mi initial; dealer item
Shift pedal pivot shaft (apply lithium-soap-based grease lightly)

Engine

Factory

Factory: Marked 4000-20000 mi or 6-30 months
Check throttle cable(s) free play and return

Fuel and air

Factory

Manual: Throttle grip (check operation, lubricate throttle grip housing tube guides). Factory: Marked 4000-20000 mi or 6-30 months; dealer item
Fuel injection (check engine idle speed)

Fuel and air

Factory

Factory: Marked 4000-20000 mi or 6-30 months; not at initial; dealer item
Replace fuel lines

Fuel and air

Factory

Manual: Fuel line (check fuel hoses for cracks or damage, replace if necessary). Factory: Marked 4000-20000 mi (7000-31000 km) or 6-30 months; not at 600 mi initial; dealer item
Clutch (check operation, fluid level and fluid leakage; correct if necessary)

Primary and gearbox

Factory

Factory: Hydraulic clutch. Every column incl. 600 mi initial; dealer item. Chart has no clutch fluid change row; TIP: change fluid after disassembling clutch master/release cylinder
Clutch lever pivot shaft (apply silicone grease lightly)

Primary and gearbox

Factory

Factory: Marked 4000-20000 mi or 6-30 months
Check steering head bearing adjustment

Front end

Factory

Manual: Steering bearings (check bearing assemblies for looseness). Factory: Every column incl. 600 mi initial; dealer item
Front fork (check operation and for oil leakage, replace if necessary)

Front end

Factory

Factory: Marked 4000-20000 mi or 6-30 months; no fork oil change interval printed; dealer item
Grease and check center / side stand and springs

Rear suspension and frame

Factory

Manual: Sidestand pivot (check operation, apply lithium-soap-based grease lightly). Factory: Marked 4000-20000 mi or 6-30 months
Inspect rear shocks for leaks and damping

Rear suspension and frame

Factory

Manual: Shock absorber assembly (check operation and for oil leakage, replace if necessary). Factory: Marked 4000-20000 mi or 6-30 months; dealer item
Sidestand switch (check operation, replace if necessary)

Rear suspension and frame

Factory

Factory: Every column incl. 600 mi initial; dealer item
Brake hoses (check for cracks or damage)

Brakes

Factory

Factory: Marked at 4000 mi, 8000 mi, 12000 mi, 16000 mi, 20000 mi (6-month columns) Re-read from Yamaha owner's manual 2DF-28199-12_02 periodic maintenance chart (library.ymcapps.net)
Brake lever pivot shaft (apply silicone grease lightly)

Brakes

Factory

Factory: Marked 4000-20000 mi or 6-30 months
Brake pedal pivot shaft (apply lithium-soap-based grease lightly)

Brakes

Factory

Factory: Marked 4000-20000 mi or 6-30 months
Check brake pads and discs

Brakes

Factory

Manual: Front brake (check operation, fluid level and fluid leakage; replace brake pads if necessary). Factory: Every column incl. 600 mi initial; dealer item
Front and rear brake switches (check operation)

Brakes

Factory

Factory: Every column incl. 600 mi initial; dealer item
Rear brake (check operation, fluid level and fluid leakage; replace brake pads if necessary)

Brakes

Factory

Factory: Every column incl. 600 mi initial; dealer item
Check wheel bearings for play

Wheels and tires

Factory

Manual: Wheel bearings (check for smooth operation, replace if necessary). Factory: Marked 4000-20000 mi or 6-30 months; dealer item
Inspect tire tread, sidewalls and date codes

Wheels and tires

Factory

Manual: Tires (check tread depth and condition, check and adjust air pressure, replace if worn or damaged). Factory: Marked 4000-20000 mi or 6-30 months; dealer item
Wheels (check runout and for damage)

Wheels and tires

Factory

Factory: Marked at 4000 mi, 8000 mi, 12000 mi, 16000 mi, 20000 mi (6-month columns) Re-read from Yamaha owner's manual 2DF-28199-12_02 periodic maintenance chart (library.ymcapps.net)
Wheels (check runout and for damage, replace if necessary)

Wheels and tires

Factory

Factory: Marked 4000-20000 mi or 6-30 months; dealer item

Every 4,000 mi or 12 months

1 item

Adjust clutch free play, lubricate cable and lever pivot

Primary and gearbox

Guideline

Every 6,000 mi or 12 months

5 items

Clean / inspect air filter

Fuel and air

Guideline

Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
Check charging voltage and regulator / cut-out

Ignition and electrics

Guideline
Check swingarm bushes for play

Rear suspension and frame

Guideline
Lubricate control cables and lever pivots

Controls and cables

Guideline
Lubricate speedometer / tachometer cables, check drive

Controls and cables

Guideline

A dry speedo cable whips the needle and eventually kills the instrument.

Every 8,000 mi or 12 months

5 items

Air induction system (check air cut-off valve, reed valve and hose for damage, replace damaged parts)

Engine

Factory

Factory: Marked at 8000 mi (13000 km) / 12 months and 16000 mi (25000 km) / 24 months; repeats at 24000 mi via the repeat rule; dealer item (p.9-4)
Inspect, clean and gap spark plugs

Engine

Factory

Manual: Spark plugs (check condition, adjust gap and clean). Factory: Marked at 4000, 12000, 20000 mi (7000/19000/31000 km; 6/18/30 months); dealer item
Replace oil filter

Engine

Factory

Manual: Engine oil filter cartridge (replace). Factory: Marked at 600 mi initial, 8000 mi (13000 km) / 12 months and 16000 mi (25000 km) / 24 months; dealer item
Replace spark plugs

Engine

Factory

Manual: Spark plugs (replace). Factory: Marked at 8000 and 16000 mi (13000/25000 km; 12/24 months); repeats at 24000 mi via the 8000 mi column; dealer item
Evaporative emission control system (check control system for damage, replace if necessary)

Controls and cables

Factory

Factory: Marked at 12000 mi (19000 km) / 18 months and 20000 mi (31000 km) / 30 months only; with the repeat rule (24000 mi = 8000 mi column) this falls at 12000, 20000, 28000, 36000 mi, i.e. every 8000 mi after the first at 12000 mi; dealer item (p.9-4)

Every 10,000 mi or 2 years

1 item

Compression test (or leak-down)

Engine

Guideline

Every 12,000 mi or 2 years

1 item

Synchronize throttle bodies

Fuel and air

Guideline

Every 15,000 mi or 3 years

1 item

Change fork oil

Front end

Guideline

Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 16,000 mi or 2 years

3 items

Clean and grease rear suspension linkage

Rear suspension and frame

Factory

Manual: Rear suspension link pivots (apply lithium-soap-based grease lightly). Factory: Marked at 16000 mi (25000 km) / 24 months only; dealer item
Grease swingarm pivot

Rear suspension and frame

Factory

Manual: Swingarm pivot bearings (moderately repack with lithium-soap-based grease). Factory: Marked at 16000 mi (25000 km) / 24 months only; repeats at 32000 mi via the repeat rule; dealer item
Swingarm pivot bearings (check bearing assemblies for looseness)

Rear suspension and frame

Factory

Factory: Marked at 8000 mi (13000 km) / 12 months only; with the repeat rule (24000 mi = 8000 mi column) this falls at 8000, 24000, 40000 mi; dealer item

Every 16,000 mi

2 items

Check and adjust valve clearances

Engine

Factory

Manual: Valve clearance (check and adjust when engine is cold). Factory: Every 16000 mi (25000 km), printed as text; no time interval; dealer item
Repack / replace steering head bearings

Front end

Factory

Manual: Steering bearings (moderately repack with lithium-soap-based grease). Factory: Every 16000 mi (25000 km), printed as text; dealer item

Every 20,000 mi or 4 years

1 item

Repack / replace wheel bearings

Wheels and tires

Guideline

Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 24,000 mi or 4 years

1 item

Replace fuel filter

Fuel and air

Guideline

Every 24,000 mi

1 item

Replace air filter element

Fuel and air

Factory

Manual: Air filter element (replace). Factory: Every 24000 mi (37000 km), printed as text; disposable oil-coated paper element, do not clean with compressed air; replace more often in unusually wet or dusty areas

Every 25,000 mi or 6 years

1 item

Replace swingarm bushes / bearings

Rear suspension and frame

Guideline

Every 30,000 mi or 6 years

1 item

Rebuild forks: seals, bushes, springs

Front end

Guideline

Every 50,000 mi

1 item

Replace drive belt (wear or damage based)

Final drive

Guideline

Every 6 months

1 item

Clean battery terminals, check charge and strap

Ignition and electrics

Guideline

Every 2 years

4 items

Inspect wiring, bullet connectors and ground points

Ignition and electrics

Guideline
Inspect frame, welds and lugs for cracks

Rear suspension and frame

Guideline
Brake and clutch master cylinder, caliper and clutch release cylinder oil seals (replace)

Brakes

Factory

Factory: From the TIP under the chart (p.9-8): replace every two years; not a chart row
Replace brake fluid

Brakes

Factory

Manual: Brake fluid (change). Factory: Every 2 years; dealer item

Every 4 years

2 items

Inspect brake hoses; replace old rubber

Brakes

Factory

Manual: Brake hoses (replace). Factory: Every 4 years; check for cracks, damage, routing and clamping at 4000-20000 mi or 6-30 months; dealer item. TIP: replace brake and clutch hoses every four years or if cracked or damaged
Rebuild calipers and master cylinders (seals)

Brakes

Guideline

Every 6 years

1 item

Replace tires on age (regardless of tread)

Wheels and tires

Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.