MotoService Log
No photo of this model in the library yet.
Yamaha · Modern chain-drive motorcycle (2000-)

TDM 850

Library entry covers 1991-2001

35 factory 28 guideline

Published source

Yamaha TDM850 Owner's Manual 4TX-28199-E5 (UK, English), periodic maintenance and lubrication chart pp.6-2 to 6-4, NOTE p.6-4

Factory owner's handbook. Covers TDM850; UK owner's manual 4TX-28199-E5, English (model year not printed on the chart pages supplied). Chart columns 1000/10000/20000/30000/40000 km plus annual check (km only, no mile figures printed); from 50000 km repeat the intervals starting from 10000 km; annual checks every year except if a kilometer-based maintenance is performed instead. Liquid-cooled carburetted parallel twin, chain final drive. No separate throttle cable row in this chart.

Open the source

63 items for a 1998 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)
Engine cycle
Four-stroke
Engine lubrication
Wet sump (oil in crankcase)
Oil filtration
Replaceable cartridge or spin-on filter
Valve gear
Overhead cam, shim adjusted (incl. desmo)
Ignition
Electronic (CDI / transistor / ECU)
Charging
Alternator / stator with rectifier
Battery
Wet cell (flooded lead-acid, needs topping up)
Fuel system
Fuel injection
Cooling
Liquid cooled
Primary drive
Gear or chain inside engine, shares engine oil
Gearbox oil
Shares engine oil
Clutch control
Hand lever, cable
Final drive
Chain
Front suspension
Telescopic fork
Rear suspension
Swingarm, single shock / cantilever
Front brake
Disc, hydraulic
Rear brake
Disc, hydraulic
Wheels
Cast / alloy, tubeless
Sidecar
No sidecar
Maintenance schedule

1998 Yamaha TDM 850

On the road: every 200 mi

1 item
  • Check engine oil level
    Pre-ride / on the road
    Guideline

    Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 300 mi

3 items
  • Check lights, horn, brake light switches
    Pre-ride / on the road
    Guideline
  • Check tire pressures
    Pre-ride / on the road
    Guideline
  • Lubricate drive chain
    Pre-ride / on the road
    Guideline

    Lube warm, ideally at the end of the riding day so it soaks in overnight. Sooner after rain.

On the road: every 500 mi

1 item
  • Check coolant level
    Pre-ride / on the road
    Guideline

On the road: every 600 mi

1 item
  • Check chain slack and rear wheel alignment
    Pre-ride / on the road
    Guideline

Every 621 mi

1 item
  • Clean drive chain thoroughly (remove and soak, re-lube)
    Final drive
    Factory

    Manual: Drive chain (check chain slack, make sure the rear wheel is properly aligned, clean and lubricate). Factory: Every 1000 km and after washing the motorcycle or riding in the rain, printed as text; not a dealer item (p.6-3)

Every 1,000 mi or 1 month

1 item
  • Check battery electrolyte, top up with distilled water
    Ignition and electrics
    Guideline

    Wet-cell batteries on old machines need regular topping up, more in hot weather.

Every 3,000 mi or 12 months

4 items
  • Check throttle cable(s) free play and return
    Fuel and air
    Guideline
  • Inspect chain and sprockets for wear (measure stretch)
    Final drive
    Guideline
  • Inspect fork seals, stanchions and fork boots
    Front end
    Guideline
  • Check footrests, pegs, rear brake and gear lever pivots
    Rear suspension and frame
    Guideline

Every 6,000 mi or 12 months

4 items
  • Inspect coolant hoses and clamps
    Engine
    Guideline
  • Check charging voltage and regulator / cut-out
    Ignition and electrics
    Guideline
  • Check swingarm bushes for play
    Rear suspension and frame
    Guideline
  • Lubricate speedometer / tachometer cables, check drive
    Controls and cables
    Guideline

    A dry speedo cable whips the needle and eventually kills the instrument.

Every 6,214 mi or 12 months

11 items
  • Change engine oil
    Engine
    Factory

    Manual: Engine oil (change). Factory: Marked every column incl. 1000 km initial (1000/10000/20000/30000/40000 km); annual check; not a dealer item (p.6-4)

  • Chassis fasteners (make sure all nuts, bolts and screws are properly tightened)
    Engine
    Factory

    Factory: Marked 10000-40000 km; annual check; dealer item (p.6-3)

  • Lights, signals and switches (check operation, adjust headlight beam)
    Engine
    Factory

    Factory: Every column incl. 1000 km initial; annual check; dealer item (p.6-4)

  • Replace fuel lines
    Fuel and air
    Factory

    Manual: Fuel line (check fuel hoses for cracks or damage). Factory: Marked 10000-40000 km; not at 1000 km; annual check; dealer item (p.6-2)

  • Synchronize throttle bodies
    Fuel and air
    Factory

    Manual: Carburetors (check starter (choke) operation, adjust engine idling speed and synchronization). Factory: Carburetor synchronization (not throttle bodies). Every column incl. 1000 km initial; annual check; dealer item (p.6-4)

  • Grease and check center / side stand and springs
    Rear suspension and frame
    Factory

    Manual: Sidestand (check operation, lubricate). Factory: Marked 10000-40000 km; annual check; not a dealer item (p.6-3)

  • Sidestand switch (check operation)
    Rear suspension and frame
    Factory

    Factory: Every column incl. 1000 km initial; annual check; dealer item (p.6-3)

  • Check brake pads and discs
    Brakes
    Factory

    Manual: Front brake (check operation, fluid level and vehicle for fluid leakage; replace brake pads whenever worn to the limit). Factory: Check every column incl. 1000 km initial; annual check; pads replaced whenever worn to the limit; dealer item (p.6-2)

  • Front and rear brake switches (check operation)
    Brakes
    Factory

    Factory: Every column incl. 1000 km initial; annual check; dealer item (p.6-4)

  • Rear brake (check operation, fluid level and vehicle for fluid leakage; replace brake pads whenever worn to the limit)
    Brakes
    Factory

    Factory: Hydraulic rear brake. Check every column incl. 1000 km initial; annual check; pads replaced whenever worn to the limit; dealer item (p.6-2)

  • Lubricate control cables and lever pivots
    Controls and cables
    Factory

    Manual: Moving parts and cables (lubricate). Factory: Marked 10000-40000 km; annual check; not a dealer item (p.6-4)

Every 6,214 mi

9 items
  • Rear suspension relay arm and connecting arm pivoting points (check operation)
    Ignition and electrics
    Factory

    Factory: Marked 10000-40000 km; no annual check; dealer item (p.6-3)

  • Adjust clutch free play, lubricate cable and lever pivot
    Primary and gearbox
    Factory

    Manual: Clutch (check operation, adjust). Factory: Every column incl. 1000 km initial; no annual check; not a dealer item (p.6-2)

  • Check steering head bearing adjustment
    Front end
    Factory

    Manual: Steering bearings (check bearing play and steering for roughness). Factory: Every column incl. 1000 km initial; no annual check; dealer item (p.6-3)

  • Front fork (check operation and for oil leakage)
    Front end
    Factory

    Factory: Marked 10000-40000 km; no annual check; no fork oil change interval printed; dealer item (p.6-3)

  • Inspect rear shocks for leaks and damping
    Rear suspension and frame
    Factory

    Manual: Rear shock absorber assembly (check operation and shock absorber for oil leakage). Factory: Marked 10000-40000 km; no annual check; dealer item (p.6-3)

  • Swingarm (check operation and for excessive play)
    Rear suspension and frame
    Factory

    Factory: Marked 10000-40000 km; no annual check; dealer item (p.6-3)

  • Check wheel bearings for play
    Wheels and tires
    Factory

    Manual: Wheel bearings (check bearing for looseness or damage). Factory: Marked 10000-40000 km; no annual check; dealer item (p.6-3)

  • Inspect tire tread, sidewalls and date codes
    Wheels and tires
    Factory

    Manual: Tires (check tread depth and for damage, replace if necessary, check and correct air pressure). Factory: Marked 10000-40000 km; no annual check marked; dealer item (p.6-3)

  • Wheels (check runout and for damage)
    Wheels and tires
    Factory

    Factory: Marked 10000-40000 km; no annual check; dealer item (p.6-3)

Every 8,000 mi or 2 years

1 item
  • Check valve clearances (shim adjusted)
    Engine
    Guideline

Every 10,000 mi or 2 years

2 items
  • Compression test (or leak-down)
    Engine
    Guideline
  • Change fork oil
    Front end
    Guideline

    Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 12,427 mi

8 items
  • Inspect, clean and gap spark plugs
    Engine
    Factory

    Manual: Spark plugs (check condition, clean and regap). Factory: Marked at 10000 and 30000 km, alternating with replace; with the repeat-from-10000 km rule every 20000 km offset by 10000 km; no annual check; not a dealer item (p.6-2)

  • Replace oil filter
    Engine
    Factory

    Manual: Engine oil filter element (replace). Factory: Marked at 1000, 20000 and 40000 km (not 10000 or 30000 km); no annual check; not a dealer item (p.6-4)

  • Replace spark plugs
    Engine
    Factory

    Manual: Spark plugs (replace). Factory: Marked at 20000 and 40000 km; no annual check; not a dealer item (p.6-2)

  • Clean / inspect air filter
    Fuel and air
    Factory

    Manual: Air filter element (clean). Factory: Clean marked at 10000 and 30000 km only, alternating with replace; no annual check. NOTE: more frequent service in unusually wet or dusty areas (pp.6-2, 6-4)

  • Replace air filter element
    Fuel and air
    Factory

    Manual: Air filter element (replace). Factory: Replace marked at 20000 and 40000 km; no annual check; more frequent service in wet or dusty areas (pp.6-2, 6-4)

  • Replace fuel filter
    Fuel and air
    Factory

    Manual: Fuel filter (check condition). Factory: Check only; marked at 20000 and 40000 km; no annual check; no replace interval printed; dealer item (p.6-2)

  • Repack / replace steering head bearings
    Front end
    Factory

    Manual: Steering bearings (lubricate with lithium-soap-based grease). Factory: Every 20000 km, printed as text; dealer item (p.6-3)

  • Clean and grease rear suspension linkage
    Rear suspension and frame
    Factory

    Manual: Rear suspension relay arm and connecting arm pivoting points (lubricate with molybdenum disulfide grease). Factory: Marked at 20000 and 40000 km; no annual check; dealer item (p.6-3)

Every 18,000 mi

1 item
  • Replace chain and sprockets (wear based)
    Final drive
    Guideline

Every 20,000 mi or 4 years

1 item
  • Repack / replace wheel bearings
    Wheels and tires
    Guideline

    Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 24,855 mi

1 item
  • Check and adjust valve clearances
    Engine
    Factory

    Manual: Valves (check valve clearance, adjust). Factory: Every 40000 km, printed as text; dealer item (p.6-2)

Every 25,000 mi or 6 years

1 item
  • Replace swingarm bushes / bearings
    Rear suspension and frame
    Guideline

Every 30,000 mi or 6 years

1 item
  • Rebuild forks: seals, bushes, springs
    Front end
    Guideline

Every 31,069 mi

1 item
  • Grease swingarm pivot
    Rear suspension and frame
    Factory

    Manual: Swingarm (lubricate with molybdenum disulfide grease). Factory: Every 50000 km, printed as text; dealer item (p.6-3)

Every 6 months

1 item
  • Clean battery terminals, check charge and strap
    Ignition and electrics
    Guideline

Every 12 months

1 item
  • Check speedometer / odometer against a known distance
    Controls and cables
    Guideline

    Old speedos drift with tire size and drive wear. Use phone GPS over a measured 10 miles / km.

Every 2 years

4 items
  • Inspect wiring, bullet connectors and ground points
    Ignition and electrics
    Guideline
  • Inspect frame, welds and lugs for cracks
    Rear suspension and frame
    Guideline
  • Brake master cylinder and caliper internal components (replace)
    Brakes
    Factory

    Factory: From the NOTE under the chart: every two years replace the internal components of the brake master cylinder and caliper; not a chart row (p.6-4)

  • Replace brake fluid
    Brakes
    Factory

    Manual: Brake fluid (change). Factory: From the hydraulic brake service NOTE under the chart: every two years change the brake fluid; regularly check and correct fluid level; not a chart row (p.6-4)

Every 3 years

1 item
  • Replace coolant
    Engine
    Factory

    Manual: Cooling system (change). Factory: Change every 3 years, printed as text; check coolant level and vehicle for coolant leakage marked 10000-40000 km and annually; dealer item (p.6-4)

Every 4 years

2 items
  • Inspect brake hoses; replace old rubber
    Brakes
    Factory

    Manual: Brake hose (replace). Factory: Every 4 years, printed as text (NOTE also: and if cracked or damaged); check for cracks or damage marked 10000-40000 km and annually; dealer item (pp.6-3, 6-4)

  • Rebuild calipers and master cylinders (seals)
    Brakes
    Guideline

Every 6 years

1 item
  • Replace tires on age (regardless of tread)
    Wheels and tires
    Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.

Keep up with this schedule on your phone

Add the bike in the app and this chart loads itself, ready to log against and edit.

Coming soon to Google Play

Other 1998 Yamaha models

All 1998 Yamaha