Yamaha Ténéré 700 (XTZ700) — Example photo: Wikisympathisant, CC BY-SA 4.0, Wikimedia Commons

Have this bike? Send a photo or the manual's service chart

Yamaha · Shim-adjusted overhead-cam four-stroke, wet sump, gearbox shares engine oil, chain drive

Ténéré 700 (XTZ700)

Library entry covers 2019-2026

60 factory 34 guideline

Published source

2024 Yamaha Ténéré 700 Service Manual, Periodic Maintenance pp.3-1 to 3-3

Factory workshop manual. Covers 2024.

94 items for a 2021 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)

Engine cycle: Four-stroke
Engine lubrication: Wet sump (oil in crankcase)
Oil filtration: Replaceable cartridge or spin-on filter
Valve gear: Overhead cam, shim adjusted (incl. desmo)
Ignition: Electronic (CDI / transistor / ECU)
Charging: Alternator / stator with rectifier
Battery: Wet cell (flooded lead-acid, needs topping up)
Fuel system: Fuel injection
Cooling: Liquid cooled
Primary drive: Gear or chain inside engine, shares engine oil
Gearbox oil: Shares engine oil
Clutch control: Hand lever, cable
Final drive: Chain
Front suspension: Telescopic fork
Rear suspension: Swingarm, single shock / cantilever
Front brake: Disc, hydraulic
Rear brake: Disc, hydraulic
Wheels: Spoked, tubed
Sidecar: No sidecar

Maintenance schedule

2021 Yamaha Ténéré 700 (XTZ700)

On the road: every 200 mi

1 item

Check engine oil level

Pre-ride / on the road

Guideline

Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 300 mi

2 items

Check lights, horn, brake light switches

Pre-ride / on the road

Guideline
Check tire pressures

Pre-ride / on the road

Guideline

On the road: every 500 mi

1 item

Check coolant level

Pre-ride / on the road

Guideline

On the road: every 600 mi

2 items

Check chain slack and rear wheel alignment

Pre-ride / on the road

Guideline
Lubricate drive chain

Pre-ride / on the road

Factory

Manual: Drive chain (check, adjust, lubricate). Factory: Every 600mi(1000km) and after washing or riding in rain

Every 3,000 mi or 12 months

8 items

Check throttle cable(s) free play and return

Fuel and air

Guideline
Clean drive chain thoroughly (remove and soak, re-lube)

Final drive

Guideline

Non O-ring chains on old machines: remove, clean, soak in hot chain grease or lube, refit with the master link clip closed end leading.
Inspect chain and sprockets for wear (measure stretch)

Final drive

Guideline
Check steering head bearing adjustment

Front end

Guideline
Check footrests, pegs, rear brake and gear lever pivots

Rear suspension and frame

Guideline
Grease and check center / side stand and springs

Rear suspension and frame

Guideline
Check brake pads and discs

Brakes

Guideline
Check wheel bearings for play

Wheels and tires

Guideline

Every 4,000 mi or 6 months

31 items

Change engine oil

Engine

Factory

Manual: Engine oil. Factory: Cols 600mi(1000km)/1mo initial, then 4000mi(7000km)/6mo spacing to 20000mi(31000km)/30mo; also initial
Chassis fasteners: Check all chassis fitting and fasteners. Correct if necessary.

Engine

Factory

Factory: As printed: √ at 4000 mi (7000 km) or 6 months, 8000 mi, 12000 mi, 16000 mi, 20000 mi (31000 km) or 30 months
Cooling system: Check coolant level and vehicle for coolant leakage.

Engine

Factory

Factory: As printed: √ at 4000 mi (7000 km) or 6 months, 8000 mi, 12000 mi, 16000 mi, 20000 mi (31000 km) or 30 months
Crankcase breather system: Check breather hose for cracks or damage.

Engine

Factory

Factory: As printed: √ at 4000 mi (7000 km) or 6 months, 8000 mi, 12000 mi, 16000 mi, 20000 mi (31000 km) or 30 months
Diagnostic system check: Perform dynamic inspection using Yamaha diagnostic tool. Check the DTC.

Engine

Factory

Factory: As printed: √ at INITIAL 600 mi (1000 km) or 1 month and every column to 20000 mi (31000 km) or 30 months
Exhaust system: Check for leakage. Tighten if necessary.

Engine

Factory

Factory: As printed: √ at INITIAL 600 mi (1000 km) or 1 month and every column to 20000 mi (31000 km) or 30 months
Lights, signals and switches: Check operation. Adjust headlight beam.

Engine

Factory

Factory: As printed: √ at INITIAL 600 mi (1000 km) or 1 month and every column to 20000 mi (31000 km) or 30 months
Shift pedal pivot shaft: Apply lithium-soap-based grease lightly.

Engine

Factory

Factory: As printed: √ at 4000 mi (7000 km) or 6 months, 8000 mi, 12000 mi, 16000 mi, 20000 mi (31000 km) or 30 months
Air filter case check hose: Clean.

Fuel and air

Factory

Factory: As printed: √ at INITIAL 600 mi (1000 km) or 1 month and every column to 20000 mi (31000 km) or 30 months
Fuel line: Check fuel hoses for cracks or damage.

Fuel and air

Factory

Factory: As printed: √ at 4000 mi (7000 km) or 6 months, 8000 mi, 12000 mi, 16000 mi, 20000 mi (31000 km) or 30 months
Synchronize throttle bodies

Fuel and air

Factory

Manual: Fuel injection (adjust synchronization). Factory: Cols 600mi(1000km)/1mo initial, then 4000mi(7000km)/6mo spacing to 20000mi(31000km)/30mo; also initial
Clutch lever pivot shaft: Apply lithium-soap-based grease lightly.

Primary and gearbox

Factory

Factory: As printed: √ at 4000 mi (7000 km) or 6 months, 8000 mi, 12000 mi, 16000 mi, 20000 mi (31000 km) or 30 months
Clutch: Check operation. Adjust or replace cable.

Primary and gearbox

Factory

Factory: As printed: √ at INITIAL 600 mi (1000 km) or 1 month and every column to 20000 mi (31000 km) or 30 months
Inspect fork seals, stanchions and fork boots

Front end

Factory

Manual: Front fork. Factory: Cols 600mi(1000km)/1mo initial, then 4000mi(7000km)/6mo spacing to 20000mi(31000km)/30mo
Steering bearings: Check bearing assemblies for looseness.

Front end

Factory

Factory: As printed: √ at INITIAL 600 mi (1000 km) or 1 month and every column to 20000 mi (31000 km) or 30 months
Shock absorber assembly: Check operation and for oil leakage.

Rear suspension and frame

Factory

Factory: As printed: √ at 4000 mi (7000 km) or 6 months, 8000 mi, 12000 mi, 16000 mi, 20000 mi (31000 km) or 30 months
Sidestand pivot: Check operation. Apply molybdenum disulfide grease lightly.

Rear suspension and frame

Factory

Factory: As printed: √ at 4000 mi (7000 km) or 6 months, 8000 mi, 12000 mi, 16000 mi, 20000 mi (31000 km) or 30 months
Sidestand switch: Check operation

Rear suspension and frame

Factory

Factory: As printed: √ at INITIAL 600 mi (1000 km) or 1 month and every column to 20000 mi (31000 km) or 30 months
Swingarm pivot bearings: Check operation and for excessive play.

Rear suspension and frame

Factory

Factory: As printed: √ at 4000 mi (7000 km) or 6 months, 8000 mi, 12000 mi, 16000 mi, 20000 mi (31000 km) or 30 months
Brake hoses: Check for cracks or damage. Check for correct routing and clamping.

Brakes

Factory

Factory: As printed: √ at 4000 mi (7000 km) or 6 months, 8000 mi, 12000 mi, 16000 mi, 20000 mi (31000 km) or 30 months
Brake lever pivot shaft: Apply silicone grease lightly.

Brakes

Factory

Factory: As printed: √ at 4000 mi (7000 km) or 6 months, 8000 mi, 12000 mi, 16000 mi, 20000 mi (31000 km) or 30 months
Brake pedal pivot shaft: Apply lithium-soap-based grease lightly.

Brakes

Factory

Factory: As printed: √ at 4000 mi (7000 km) or 6 months, 8000 mi, 12000 mi, 16000 mi, 20000 mi (31000 km) or 30 months
Front and rear brake switches: Check operation.

Brakes

Factory

Factory: As printed: √ at INITIAL 600 mi (1000 km) or 1 month and every column to 20000 mi (31000 km) or 30 months
Front brake: Check operation, fluid level, and for fluid leakage.

Brakes

Factory

Factory: As printed: √ at INITIAL 600 mi (1000 km) or 1 month and every column to 20000 mi (31000 km) or 30 months
Rear brake: Check operation, fluid level, and for fluid leakage.

Brakes

Factory

Factory: As printed: √ at INITIAL 600 mi (1000 km) or 1 month and every column to 20000 mi (31000 km) or 30 months
Check spoke tension and wheel true

Wheels and tires

Factory

Manual: Wheels (spoke tightness, runout). Factory: Cols 600mi(1000km)/1mo initial, then 4000mi(7000km)/6mo spacing to 20000mi(31000km)/30mo; also initial
Inspect tire tread, sidewalls and date codes

Wheels and tires

Factory

Manual: Tires. Factory: Cols 600mi(1000km)/1mo initial, then 4000mi(7000km)/6mo spacing to 20000mi(31000km)/30mo
Tires: Check tread depth and for damage.

Wheels and tires

Factory

Factory: As printed: √ at 4000 mi (7000 km) or 6 months, 8000 mi, 12000 mi, 16000 mi, 20000 mi (31000 km) or 30 months
Wheel bearings: Check bearings for smooth operation.

Wheels and tires

Factory

Factory: As printed: √ at 4000 mi (7000 km) or 6 months, 8000 mi, 12000 mi, 16000 mi, 20000 mi (31000 km) or 30 months
Lubricate control cables and lever pivots

Controls and cables

Factory

Manual: Control cables. Factory: Cols 600mi(1000km)/1mo initial, then 4000mi(7000km)/6mo spacing to 20000mi(31000km)/30mo; also initial
Throttle grip: Check operation. Check throttle grip free play, and adjust if necessary. Lubricate cable and grip housing.

Controls and cables

Factory

Factory: As printed: √ at 4000 mi (7000 km) or 6 months, 8000 mi, 12000 mi, 16000 mi, 20000 mi (31000 km) or 30 months

Every 4,000 mi or 12 months

1 item

Adjust clutch free play, lubricate cable and lever pivot

Primary and gearbox

Guideline

Every 6,000 mi or 12 months

6 items

Inspect coolant hoses and clamps

Engine

Guideline
Clean / inspect air filter

Fuel and air

Guideline

Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
Check charging voltage and regulator / cut-out

Ignition and electrics

Guideline
Check swingarm bushes for play

Rear suspension and frame

Guideline
Inspect rear shocks for leaks and damping

Rear suspension and frame

Guideline
Lubricate speedometer / tachometer cables, check drive

Controls and cables

Guideline

A dry speedo cable whips the needle and eventually kills the instrument.

Every 8,000 mi or 12 months

4 items

Inspect, clean and gap spark plugs

Engine

Factory

Manual: Spark plugs (check, gap, clean). Factory: Check at 4000, 12000, 20000mi columns
Replace oil filter

Engine

Factory

Manual: Engine oil filter cartridge. Factory: Marked initial, 8000mi, 16000mi
Replace spark plugs

Engine

Factory

Manual: Spark plugs (replace). Factory: Replace at 8000 and 16000mi columns
Evaporative emission control system: Check control system for damage.

Controls and cables

Factory

Factory: As printed: √ at 12000 mi (19000 km) or 18 months and 20000 mi (31000 km) or 30 months

Every 10,000 mi or 2 years

1 item

Compression test (or leak-down)

Engine

Guideline

Every 12,000 mi

3 items

Replace air filter element

Fuel and air

Factory

Manual: Air filter element. Factory: Replace every 12000mi(19000km)
Repack / replace steering head bearings

Front end

Factory

Manual: Steering bearings (repack). Factory: Every 12000mi(19000km)
Clean and grease rear suspension linkage

Rear suspension and frame

Factory

Manual: Rear suspension link pivots (lubricate). Factory: Every 12000mi(19000km)

Every 15,000 mi or 3 years

1 item

Change fork oil

Front end

Guideline

Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 18,000 mi

1 item

Replace chain and sprockets (wear based)

Final drive

Guideline

Every 20,000 mi or 4 years

1 item

Repack / replace wheel bearings

Wheels and tires

Guideline

Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 24,000 mi or 4 years

1 item

Replace fuel filter

Fuel and air

Guideline

Every 25,000 mi or 6 years

1 item

Replace swingarm bushes / bearings

Rear suspension and frame

Guideline

Every 26,600 mi

1 item

Check valve clearances (shim adjusted)

Engine

Factory

Manual: Valve clearance. Factory: Every 26600mi(42000km)

Every 30,000 mi or 6 years

1 item

Rebuild forks: seals, bushes, springs

Front end

Guideline

Every 32,000 mi

1 item

Grease swingarm pivot

Rear suspension and frame

Factory

Manual: Swingarm pivot bearings (repack). Factory: Every 32000mi(50000km)

Every 6 months

1 item

Clean battery terminals, check charge and strap

Ignition and electrics

Guideline

Every 2 years

4 items

Inspect wiring, bullet connectors and ground points

Ignition and electrics

Guideline
Inspect frame, welds and lugs for cracks

Rear suspension and frame

Guideline
Hydraulic brake service: replace internal components of master cylinders and calipers

Brakes

Factory

Factory: As printed: TIP: Every two years replace the internal components of the brake master cylinders and calipers, and change the brake fluid.
Replace brake fluid

Brakes

Factory

Manual: Brake fluid (change). Factory: Every 2 years

Every 3 years

1 item

Replace coolant

Engine

Factory

Manual: Cooling system (change coolant). Factory: Every 3 years

Every 4 years

3 items

Replace fuel lines

Fuel and air

Guideline

Old rubber and modern ethanol fuel do not mix well.
Inspect brake hoses; replace old rubber

Brakes

Factory

Manual: Brake hoses (replace). Factory: Every 4 years
Rebuild calipers and master cylinders (seals)

Brakes

Guideline

Every 6 years

2 items

Replace inner tubes and rim tape with tires

Wheels and tires

Guideline
Replace tires on age (regardless of tread)

Wheels and tires

Guideline

No interval set

15 items

Crankcase breather system: Replace if necessary.

Engine

Factory

Factory: As printed: Replace if necessary.
Exhaust system: Replace gaskets if necessary.

Engine

Factory

Factory: As printed: Replace gaskets if necessary.
Fuel line: Replace if necessary.

Fuel and air

Factory

Factory: As printed: Replace if necessary.
Front fork: Replace if necessary.

Front end

Factory

Factory: As printed: Replace if necessary.
Shock absorber assembly: Replace if necessary.

Rear suspension and frame

Factory

Factory: As printed: Replace if necessary.
Sidestand switch: replace if necessary.

Rear suspension and frame

Factory

Factory: As printed: Check operation and replace if necessary.
Brake hoses: replace if cracked or damaged

Brakes

Factory

Factory: As printed: TIP: Replace the brake hoses every four years or sooner if cracked or damaged.
Front brake: Replace brake pads if necessary.

Brakes

Factory

Factory: As printed: Replace brake pads if necessary.
Hydraulic brake service: check brake fluid levels

Brakes

Factory

Factory: As printed: TIP: Regularly check the brake fluid levels. Replenish as necessary.
Rear brake: Replace brake pads if necessary.

Brakes

Factory

Factory: As printed: Replace brake pads if necessary.
Tires: Check air pressure. Correct if necessary.

Wheels and tires

Factory

Factory: As printed: Correct if necessary.
Tires: Replace if necessary.

Wheels and tires

Factory

Factory: As printed: Replace if necessary.
Wheel bearings: Replace if necessary.

Wheels and tires

Factory

Factory: As printed: Replace if necessary.
Wheels: Tighten spokes if necessary.

Wheels and tires

Factory

Factory: As printed: Tighten spokes if necessary.
Evaporative emission control system: Replace if necessary.

Controls and cables

Factory

Factory: As printed: Replace if necessary.

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.