Yamaha · Shim-adjusted overhead-cam four-stroke, wet sump, gearbox shares engine oil, shaft drive

V-Star 1100 (XVS1100)

Library entry covers 1999-2009

17 factory 31 guideline

Published source

Yamaha 2001 V Star 1100 Classic Owner's Manual, pp.6-3 to 6-6

Factory owner's handbook. Covers 2001 (Classic); chart applies 1999-2009 family.

Open the source

48 items for a 2003 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)

Engine cycle: Four-stroke
Engine lubrication: Wet sump (oil in crankcase)
Oil filtration: Replaceable cartridge or spin-on filter
Valve gear: Overhead cam, shim adjusted (incl. desmo)
Ignition: Electronic (CDI / transistor / ECU)
Charging: Alternator / stator with rectifier
Battery: Wet cell (flooded lead-acid, needs topping up)
Fuel system: Two or more carburetors
Cooling: Air / oil cooled
Primary drive: Gear or chain inside engine, shares engine oil
Gearbox oil: Shares engine oil
Clutch control: Hand lever, cable
Final drive: Shaft
Front suspension: Telescopic fork
Rear suspension: Swingarm, single shock / cantilever
Front brake: Disc, hydraulic
Rear brake: Disc, hydraulic
Wheels: Cast / alloy, tubeless
Sidecar: No sidecar

Maintenance schedule

2003 Yamaha V-Star 1100 (XVS1100)

On the road: every 200 mi

1 item

Check engine oil level

Pre-ride / on the road

Guideline

Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 300 mi

2 items

Check lights, horn, brake light switches

Pre-ride / on the road

Guideline
Check tire pressures

Pre-ride / on the road

Guideline

Every 3,000 mi or 12 months

6 items

Check throttle cable(s) free play and return

Fuel and air

Guideline
Clean fuel tap filter / sediment bowl

Fuel and air

Guideline
Check steering head bearing adjustment

Front end

Guideline
Check footrests, pegs, rear brake and gear lever pivots

Rear suspension and frame

Guideline
Grease and check center / side stand and springs

Rear suspension and frame

Guideline
Check brake pads and discs

Brakes

Guideline

Every 4,000 mi or 6 months

9 items

Change engine oil

Engine

Factory

Manual: Engine oil. Factory: Cols 600mi(1000km)/1mo initial, then 4000mi(7000km)/6mo spacing to 20000mi; also at initial 600mi
Check and adjust valve clearances

Engine

Factory

Manual: Valve clearance. Factory: Cols 600mi(1000km)/1mo initial, then 4000mi(7000km)/6mo spacing to 20000mi; marked every column incl. initial
Inspect, clean and gap spark plugs

Engine

Factory

Manual: Spark plugs (check, gap, clean). Factory: Cols 600mi(1000km)/1mo initial, then 4000mi(7000km)/6mo spacing to 20000mi
Clean / inspect air filter

Fuel and air

Factory

Manual: Air filter (clean or replace if necessary). Factory: Cols 600mi(1000km)/1mo initial, then 4000mi(7000km)/6mo spacing to 20000mi
Synchronize carburetors

Fuel and air

Factory

Manual: Carburetor synchronization. Factory: Cols 600mi(1000km)/1mo initial, then 4000mi(7000km)/6mo spacing to 20000mi; also at initial
Inspect fork seals, stanchions and fork boots

Front end

Factory

Manual: Front fork (check operation, oil leakage). Factory: Cols 600mi(1000km)/1mo initial, then 4000mi(7000km)/6mo spacing to 20000mi
Check wheel bearings for play

Wheels and tires

Factory

Manual: Wheel bearings. Factory: Cols 600mi(1000km)/1mo initial, then 4000mi(7000km)/6mo spacing to 20000mi
Inspect tire tread, sidewalls and date codes

Wheels and tires

Factory

Manual: Tires. Factory: Cols 600mi(1000km)/1mo initial, then 4000mi(7000km)/6mo spacing to 20000mi
Lubricate control cables and lever pivots

Controls and cables

Factory

Manual: Control and meter cable. Factory: Cols 600mi(1000km)/1mo initial, then 4000mi(7000km)/6mo spacing to 20000mi; also initial

Every 4,000 mi or 12 months

1 item

Adjust clutch free play, lubricate cable and lever pivot

Primary and gearbox

Guideline

Every 6,000 mi or 12 months

6 items

Clean carburetor float bowl(s), check float level and jets

Fuel and air

Guideline

Ethanol fuel varnishes old carbs quickly in storage.
Check charging voltage and regulator / cut-out

Ignition and electrics

Guideline
Check final drive for leaks and bearing play

Final drive

Guideline
Check swingarm bushes for play

Rear suspension and frame

Guideline
Inspect rear shocks for leaks and damping

Rear suspension and frame

Guideline
Lubricate speedometer / tachometer cables, check drive

Controls and cables

Guideline

A dry speedo cable whips the needle and eventually kills the instrument.

Every 8,000 mi or 12 months

2 items

Replace oil filter

Engine

Factory

Manual: Engine oil filter. Factory: Marked initial, 8000mi, 16000mi columns
Replace spark plugs

Engine

Factory

Manual: Spark plugs (replace). Factory: Replace at 8000mi(13000km)/12mo, thereafter every 8000mi

Every 10,000 mi or 2 years

1 item

Compression test (or leak-down)

Engine

Guideline

Every 12,000 mi or 2 years

3 items

Replace air filter element

Fuel and air

Guideline
Clean and grease rear suspension linkage

Rear suspension and frame

Guideline
Grease swingarm pivot

Rear suspension and frame

Guideline

Every 15,000 mi or 3 years

1 item

Change fork oil

Front end

Guideline

Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 15,000 mi or 4 years

1 item

Check valve clearances (shim adjusted)

Engine

Guideline

Every 16,000 mi or 2 years

3 items

Change final drive (rear drive) oil

Final drive

Factory

Manual: Final gear oil. Factory: Replace at initial 600mi(1000km)/1mo, thereafter every 16000mi; check 8000mi
Repack / replace steering head bearings

Front end

Factory

Manual: Steering bearings (repack). Factory: Check every 4000mi; repack every 16000mi(25000km)/24mo
Replace swingarm bushes / bearings

Rear suspension and frame

Factory

Manual: Swingarm pivot bearing (repack). Factory: Moderately repack every 16000mi(25000km)/24mo

Every 20,000 mi or 4 years

2 items

Lubricate drive shaft splines / check U-joint

Final drive

Guideline
Repack / replace wheel bearings

Wheels and tires

Guideline

Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 20,000 mi

1 item

Replace fuel filter

Fuel and air

Factory

Manual: Fuel filter. Factory: Replace initial 20000mi(31000km), thereafter every 20000mi

Every 30,000 mi or 6 years

1 item

Rebuild forks: seals, bushes, springs

Front end

Guideline

Every 6 months

1 item

Clean battery terminals, check charge and strap

Ignition and electrics

Guideline

Every 2 years

4 items

Inspect wiring, bullet connectors and ground points

Ignition and electrics

Guideline
Inspect frame, welds and lugs for cracks

Rear suspension and frame

Guideline
Rebuild calipers and master cylinders (seals)

Brakes

Factory

Manual: Replace master cylinder/caliper oil seals. Factory: Note p.6-6: every two years
Replace brake fluid

Brakes

Guideline

Every 4 years

2 items

Replace fuel lines

Fuel and air

Guideline

Old rubber and modern ethanol fuel do not mix well.
Inspect brake hoses; replace old rubber

Brakes

Factory

Manual: Brake hoses. Factory: Note p.6-6: replace every four years or if cracked

Every 6 years

1 item

Replace tires on age (regardless of tread)

Wheels and tires

Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.