MotoService Log
Harley-Davidson Softail (Twin Cam)
Example photo: Pierre André Leclercq, CC BY 4.0, Wikimedia Commons
Harley-Davidson · Harley-Davidson Twin Cam (1999-2017)

Softail (Twin Cam)

Library entry covers 2000-2017

13 factory 34 guideline

Published source

2006 HD Buell Service Intervals (H-D factory service interval tables 43-47)

Factory workshop manual. Covers 2006.

Open the source

47 items for a 2000 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)
Engine cycle
Four-stroke
Engine lubrication
Dry sump (separate oil tank)
Oil filtration
Replaceable cartridge or spin-on filter
Valve gear
Hydraulic lifters (no routine clearance adjustment)
Ignition
Electronic (CDI / transistor / ECU)
Charging
Alternator / stator with rectifier
Battery
Wet cell (flooded lead-acid, needs topping up)
Fuel system
Fuel injection
Cooling
Air / oil cooled
Primary drive
Chain in oil-bath case with its own oil
Gearbox oil
Separate gearbox oil
Clutch control
Hand lever, cable
Final drive
Toothed belt
Front suspension
Telescopic fork
Rear suspension
Swingarm, single shock / cantilever
Front brake
Disc, hydraulic
Rear brake
Disc, hydraulic
Wheels
Cast / alloy, tubeless
Sidecar
No sidecar
Maintenance schedule

2000 Harley-Davidson Softail (Twin Cam)

On the road: every 200 mi

1 item
  • Check engine oil level
    Pre-ride / on the road
    Guideline

    Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 300 mi

2 items
  • Check lights, horn, brake light switches
    Pre-ride / on the road
    Guideline
  • Check tire pressures
    Pre-ride / on the road
    Guideline

Every 2,500 mi

1 item
  • Check steering head bearing adjustment
    Front end
    Factory

    Manual: Springer steering head: adjust and lubricate. Factory: Springer models only, every 2500 mi

Every 3,000 mi or 12 months

5 items
  • Check throttle cable(s) free play and return
    Fuel and air
    Guideline
  • Inspect fork seals, stanchions and fork boots
    Front end
    Guideline
  • Check footrests, pegs, rear brake and gear lever pivots
    Rear suspension and frame
    Guideline
  • Grease and check center / side stand and springs
    Rear suspension and frame
    Guideline
  • Check wheel bearings for play
    Wheels and tires
    Guideline

Every 4,000 mi or 12 months

1 item
  • Inspect, clean and gap spark plugs
    Engine
    Guideline

Every 5,000 mi

9 items
  • Change engine oil
    Engine
    Factory

    Manual: Replace engine oil and filter. Factory: marked at every column: 1000 mi then every 5000 mi

  • Replace oil filter
    Engine
    Factory

    Manual: Replace engine oil and filter. Factory: filter changed with oil, 1000 then every 5000 mi

  • Clean / inspect air filter
    Fuel and air
    Factory

    Manual: Inspect air cleaner, service as required. Factory: every interval (1000, then each 5000)

  • Adjust clutch free play, lubricate cable and lever pivot
    Primary and gearbox
    Factory

    Manual: Check/adjust clutch. Factory: every interval

  • Check / adjust primary chain
    Primary and gearbox
    Factory

    Manual: Check primary chain adjustment. Factory: every interval

  • Inspect drive belt, pulleys and tension
    Final drive
    Factory

    Manual: Check rear belt. Factory: every interval

  • Check brake pads and discs
    Brakes
    Factory

    Manual: Inspect brake pads and discs for wear. Factory: every interval

  • Inspect tire tread, sidewalls and date codes
    Wheels and tires
    Factory

    Manual: Check tire pressure, inspect tread. Factory: every interval

  • Lubricate control cables and lever pivots
    Controls and cables
    Factory

    Manual: Check throttle, brake, enrichener, clutch controls. Factory: every interval

Every 6,000 mi or 12 months

4 items
  • Check charging voltage and regulator / cut-out
    Ignition and electrics
    Guideline
  • Check swingarm bushes for play
    Rear suspension and frame
    Guideline
  • Inspect rear shocks for leaks and damping
    Rear suspension and frame
    Guideline
  • Lubricate speedometer / tachometer cables, check drive
    Controls and cables
    Guideline

    A dry speedo cable whips the needle and eventually kills the instrument.

Every 10,000 mi or 12 months

1 item
  • Change primary chaincase oil
    Primary and gearbox
    Guideline

Every 10,000 mi or 2 years

2 items
  • Compression test (or leak-down)
    Engine
    Guideline
  • Change gearbox oil
    Primary and gearbox
    Guideline

Every 12,000 mi or 2 years

4 items
  • Replace air filter element
    Fuel and air
    Guideline
  • Synchronize throttle bodies
    Fuel and air
    Guideline
  • Clean and grease rear suspension linkage
    Rear suspension and frame
    Guideline
  • Grease swingarm pivot
    Rear suspension and frame
    Guideline

Every 15,000 mi or 3 years

1 item
  • Change fork oil
    Front end
    Guideline

    Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 16,000 mi or 4 years

1 item
  • Replace spark plugs
    Engine
    Guideline

Every 20,000 mi or 4 years

1 item
  • Repack / replace wheel bearings
    Wheels and tires
    Guideline

    Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 24,000 mi or 4 years

1 item
  • Replace fuel filter
    Fuel and air
    Guideline

Every 25,000 mi or 6 years

1 item
  • Replace swingarm bushes / bearings
    Rear suspension and frame
    Guideline

Every 25,000 mi

1 item
  • Inspect cam chain tensioner shoes (spring-loaded type)
    Engine
    Guideline

Every 30,000 mi or 6 years

1 item
  • Rebuild forks: seals, bushes, springs
    Front end
    Guideline

Every 30,000 mi

1 item
  • Repack / replace steering head bearings
    Front end
    Factory

    Manual: Steering head bearings: disassemble, lubricate, inspect. Factory: footnote: every 30,000 mi

Every 50,000 mi

1 item
  • Replace drive belt (wear or damage based)
    Final drive
    Guideline

Every 12 months

1 item
  • Clean battery terminals, check charge and strap
    Ignition and electrics
    Factory

    Manual: Check battery and clean connections. Factory: annually

Every 2 years

3 items
  • Inspect wiring, bullet connectors and ground points
    Ignition and electrics
    Guideline
  • Inspect frame, welds and lugs for cracks
    Rear suspension and frame
    Guideline
  • Replace brake fluid
    Brakes
    Factory

    Manual: Change DOT 4 brake fluid, flush. Factory: flush and replace every two years

Every 4 years

3 items
  • Replace fuel lines
    Fuel and air
    Guideline

    Old rubber and modern ethanol fuel do not mix well.

  • Inspect brake hoses; replace old rubber
    Brakes
    Guideline
  • Rebuild calipers and master cylinders (seals)
    Brakes
    Guideline

Every 6 years

1 item
  • Replace tires on age (regardless of tread)
    Wheels and tires
    Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.

Keep up with this schedule on your phone

Add the bike in the app and this chart loads itself, ready to log against and edit.

Coming soon to Google Play

Other 2000 Harley-Davidson models

All 2000 Harley-Davidson