MotoService Log
Harley-Davidson Softail (Twin Cam)
Example photo: Pierre André Leclercq, CC BY 4.0, Wikimedia Commons
Harley-Davidson · Harley-Davidson Twin Cam (1999-2017)

Softail (Twin Cam)

Library entry covers 2000-2017

35 factory 34 guideline

Published source

2006 HD Buell Service Intervals (H-D factory service interval tables 43-47)

Factory workshop manual. Covers 2006.

69 items for a 2000 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)
Engine cycle
Four-stroke
Engine lubrication
Dry sump (separate oil tank)
Oil filtration
Replaceable cartridge or spin-on filter
Valve gear
Hydraulic lifters (no routine clearance adjustment)
Ignition
Electronic (CDI / transistor / ECU)
Charging
Alternator / stator with rectifier
Battery
Wet cell (flooded lead-acid, needs topping up)
Fuel system
Fuel injection
Cooling
Air / oil cooled
Primary drive
Chain in oil-bath case with its own oil
Gearbox oil
Separate gearbox oil
Clutch control
Hand lever, cable
Final drive
Toothed belt
Front suspension
Telescopic fork
Rear suspension
Swingarm, single shock / cantilever
Front brake
Disc, hydraulic
Rear brake
Disc, hydraulic
Wheels
Cast / alloy, tubeless
Sidecar
No sidecar
Maintenance schedule

2000 Harley-Davidson Softail (Twin Cam)

On the road: every 300 km

1 item
  • Check engine oil level
    Pre-ride / on the road
    Guideline

    Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 500 km

2 items
  • Check lights, horn, brake light switches
    Pre-ride / on the road
    Guideline
  • Check tire pressures
    Pre-ride / on the road
    Guideline

Every 4,000 km

1 item
  • Check steering head bearing adjustment
    Front end
    Factory

    Manual: Springer steering head: adjust and lubricate. Factory: Springer models only, every 2500 mi

Every 5,000 km or 12 months

5 items
  • Check throttle cable(s) free play and return
    Fuel and air
    Guideline
  • Inspect fork seals, stanchions and fork boots
    Front end
    Guideline
  • Check footrests, pegs, rear brake and gear lever pivots
    Rear suspension and frame
    Guideline
  • Grease and check center / side stand and springs
    Rear suspension and frame
    Guideline
  • Check wheel bearings for play
    Wheels and tires
    Guideline

Every 6,500 km or 12 months

1 item
  • Inspect, clean and gap spark plugs
    Engine
    Guideline

Every 8,000 km

17 items
  • Change engine oil
    Engine
    Factory

    Manual: Replace engine oil and filter. Factory: marked at every column: 1000 mi then every 5000 mi

  • Electrical equipment and switches: Check operation
    Engine
    Factory

    Factory: As printed: X in all six columns (1,000 / 5,000 / 10,000 / 15,000 / 20,000 / 25,000 mi)

  • Engine idle speed: Check adjustment
    Engine
    Factory

    Factory: As printed: X in all six columns (1,000 / 5,000 / 10,000 / 15,000 / 20,000 / 25,000 mi)

  • Replace oil filter
    Engine
    Factory

    Manual: Replace engine oil and filter. Factory: filter changed with oil, 1000 then every 5000 mi

  • Road test: verify component and system functions
    Engine
    Factory

    Factory: first at 1000 mi (1600 km), then every 5000 mi (8000 km) Read from Harley-Davidson/Buell 2006 Service Intervals, Table 45 (2006 Softail models)

  • Verify component and system functions
    Engine
    Factory

    Factory: As printed: X in all six columns (1,000 / 5,000 / 10,000 / 15,000 / 20,000 / 25,000 mi)

  • Clean / inspect air filter
    Fuel and air
    Factory

    Manual: Inspect air cleaner, service as required. Factory: every interval (1000, then each 5000)

  • Fuel door, Tour-Pak, saddlebags: lubricate hinges and latches
    Fuel and air
    Factory

    Factory: every service from 1000 mi through 20000 mi (5000 mi steps) Read from Harley-Davidson/Buell 2006 Service Intervals, Table 45 (2006 Softail models)

  • Fuel valve, lines and fittings: Inspect for leaks
    Fuel and air
    Factory

    Factory: As printed: X in all six columns (1,000 / 5,000 / 10,000 / 15,000 / 20,000 / 25,000 mi)

  • Adjust clutch free play, lubricate cable and lever pivot
    Primary and gearbox
    Factory

    Manual: Check/adjust clutch. Factory: every interval

  • Check / adjust primary chain
    Primary and gearbox
    Factory

    Manual: Check primary chain adjustment. Factory: every interval

  • Inspect drive belt, pulleys and tension
    Final drive
    Factory

    Manual: Check rear belt. Factory: every interval

  • Brake fluid: Check levels and condition
    Brakes
    Factory

    Factory: As printed: X in all six columns (1,000 / 5,000 / 10,000 / 15,000 / 20,000 / 25,000 mi)

  • Check brake pads and discs
    Brakes
    Factory

    Manual: Inspect brake pads and discs for wear. Factory: every interval

  • Oil lines and brake system: Inspect for leaks
    Brakes
    Factory

    Factory: As printed: X in all six columns (1,000 / 5,000 / 10,000 / 15,000 / 20,000 / 25,000 mi)

  • Inspect tire tread, sidewalls and date codes
    Wheels and tires
    Factory

    Manual: Check tire pressure, inspect tread. Factory: every interval

  • Lubricate control cables and lever pivots
    Controls and cables
    Factory

    Manual: Check throttle, brake, enrichener, clutch controls. Factory: every interval

Every 9,500 km or 12 months

4 items
  • Check charging voltage and regulator / cut-out
    Ignition and electrics
    Guideline
  • Check swingarm bushes for play
    Rear suspension and frame
    Guideline
  • Inspect rear shocks for leaks and damping
    Rear suspension and frame
    Guideline
  • Lubricate speedometer / tachometer cables, check drive
    Controls and cables
    Guideline

    A dry speedo cable whips the needle and eventually kills the instrument.

Every 16,000 km or 12 months

1 item
  • Change primary chaincase oil
    Primary and gearbox
    Guideline

Every 16,000 km or 2 years

2 items
  • Compression test (or leak-down)
    Engine
    Guideline
  • Change gearbox oil
    Primary and gearbox
    Guideline

Every 16,000 km

8 items
  • Critical fasteners: check tightness
    Engine
    Factory

    Factory: first at 1000 mi (1600 km), then 10000 and 20000 mi; dealer item (note 1) Read from Harley-Davidson/Buell 2006 Service Intervals, Table 45 (2006 Softail models)

  • Spark plugs: inspect
    Engine
    Factory

    Factory: marked at 1000, 5000, 15000 and 25000 mi, between replacements Read from Harley-Davidson/Buell 2006 Service Intervals, Table 45 (2006 Softail models)

  • Spark plugs: replace
    Engine
    Factory

    Factory: marked at 10000 and 20000 mi (16000, 32000 km) Read from Harley-Davidson/Buell 2006 Service Intervals, Table 45 (2006 Softail models)

  • Springer rocker bearings: adjust
    Engine
    Factory

    Factory: first at 1000 mi (1600 km), then 10000 and 20000 mi; dealer item (note 1) Read from Harley-Davidson/Buell 2006 Service Intervals, Table 45 (2006 Softail models)

  • Windshield bushings: inspect
    Engine
    Factory

    Factory: marked at 10000 and 20000 mi (16000, 32000 km); dealer item (note 1) Read from Harley-Davidson/Buell 2006 Service Intervals, Table 45 (2006 Softail models)

  • Primary chaincase lubricant: replace
    Final drive
    Factory

    Factory: first at 1000 mi (1600 km), then 10000 and 20000 mi Read from Harley-Davidson/Buell 2006 Service Intervals, Table 45 (2006 Softail models)

  • Steering head bearings: adjust (Softail models)
    Front end
    Factory

    Factory: first at 1000 mi (1600 km), then 10000 and 20000 mi; dealer item (note 1) Read from Harley-Davidson/Buell 2006 Service Intervals, Table 45 (2006 Softail models)

  • Jiffy stand: inspect and lubricate
    Rear suspension and frame
    Factory

    Factory: first at 1000 mi (1600 km), then 10000 and 20000 mi; dealer item (note 1) Read from Harley-Davidson/Buell 2006 Service Intervals, Table 45 (2006 Softail models)

Every 19,500 km or 2 years

4 items
  • Replace air filter element
    Fuel and air
    Guideline
  • Synchronize throttle bodies
    Fuel and air
    Guideline
  • Clean and grease rear suspension linkage
    Rear suspension and frame
    Guideline
  • Grease swingarm pivot
    Rear suspension and frame
    Guideline

Every 24,000 km or 3 years

1 item
  • Change fork oil
    Front end
    Guideline

    Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 24,000 km

1 item
  • Wheel spokes: check tightness
    Wheels and tires
    Factory

    Factory: marked at 1000, 5000 and 20000 mi (1600, 8000, 32000 km); not all vehicles have spoke wheels (note 4) Read from Harley-Davidson/Buell 2006 Service Intervals, Table 45 (2006 Softail models)

Every 25,500 km or 4 years

1 item
  • Replace spark plugs
    Engine
    Guideline

Every 32,000 km or 4 years

1 item
  • Repack / replace wheel bearings
    Wheels and tires
    Guideline

    Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 32,000 km

2 items
  • Transmission lubricant: replace
    Primary and gearbox
    Factory

    Factory: first at 1000 mi (1600 km), then 20000 mi (32000 km) Read from Harley-Davidson/Buell 2006 Service Intervals, Table 45 (2006 Softail models)

  • Steering head bearings (Springer models): Disassemble, lubricate and inspect
    Front end
    Factory

    Factory: As printed: Note 5: Disassemble, lubricate and inspect every 20,000 miles (32,000 kilometers).

Every 38,500 km or 4 years

1 item
  • Replace fuel filter
    Fuel and air
    Guideline

Every 40,000 km or 6 years

1 item
  • Replace swingarm bushes / bearings
    Rear suspension and frame
    Guideline

Every 40,000 km

1 item
  • Inspect cam chain tensioner shoes (spring-loaded type)
    Engine
    Guideline

Every 48,000 km

1 item
  • Repack / replace steering head bearings
    Front end
    Factory

    Manual: Steering head bearings: disassemble, lubricate, inspect. Factory: footnote: every 30,000 mi

Every 48,500 km or 6 years

1 item
  • Rebuild forks: seals, bushes, springs
    Front end
    Guideline

Every 80,500 km

1 item
  • Replace drive belt (wear or damage based)
    Final drive
    Guideline

Every 12 months

1 item
  • Clean battery terminals, check charge and strap
    Ignition and electrics
    Factory

    Manual: Check battery and clean connections. Factory: annually

Every 2 years

3 items
  • Inspect wiring, bullet connectors and ground points
    Ignition and electrics
    Guideline
  • Inspect frame, welds and lugs for cracks
    Rear suspension and frame
    Guideline
  • Replace brake fluid
    Brakes
    Factory

    Manual: Change DOT 4 brake fluid, flush. Factory: flush and replace every two years

Every 4 years

3 items
  • Replace fuel lines
    Fuel and air
    Guideline

    Old rubber and modern ethanol fuel do not mix well.

  • Inspect brake hoses; replace old rubber
    Brakes
    Guideline
  • Rebuild calipers and master cylinders (seals)
    Brakes
    Guideline

Every 6 years

1 item
  • Replace tires on age (regardless of tread)
    Wheels and tires
    Guideline

No interval set

3 items
  • Fuel tank filter screen: Clean (EFI: replace)
    Fuel and air
    Factory

    Factory: As printed: X in one column only; columns not readable

  • Front fork oil: Replace
    Front end
    Factory

    Factory: As printed: X in one column only; columns not readable

  • Rear fork bearings (if applicable): Repack
    Front end
    Factory

    Factory: As printed: X in one column only; columns not readable

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.

Keep up with this schedule on your phone

Add the bike in the app and this chart loads itself, ready to log against and edit.

Coming soon to Google Play

Other 2000 Harley-Davidson models

All 2000 Harley-Davidson