No photo of this model in the library yet.

Have this bike? Send a photo or the manual's service chart

Royal Enfield · Shim-adjusted overhead-cam four-stroke, wet sump, gearbox shares engine oil, chain drive

Classic 650

Library entry covers 2025

31 factory 48 guideline

Published source

Royal Enfield Classic 650 Owner's Manual (India, BS-VI), Periodical Maintenance pp.113-116

Factory owner's handbook. Covers Royal Enfield Classic 650 owner's manual, India BS-VI edition (royalenfield.com).

79 items for a 2025 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)

Engine cycle: Four-stroke
Engine lubrication: Wet sump (oil in crankcase)
Oil filtration: Replaceable cartridge or spin-on filter
Valve gear: Overhead cam, shim adjusted (incl. desmo)
Ignition: Electronic (CDI / transistor / ECU)
Charging: Alternator / stator with rectifier
Battery: Wet cell (flooded lead-acid, needs topping up)
Fuel system: Fuel injection
Cooling: Air / oil cooled
Primary drive: Gear or chain inside engine, shares engine oil
Gearbox oil: Shares engine oil
Clutch control: Hand lever, cable
Final drive: Chain
Front suspension: Telescopic fork
Rear suspension: Swingarm, twin shocks
Front brake: Disc, hydraulic
Rear brake: Disc, hydraulic
Wheels: Spoked, tubed
Sidecar: No sidecar

Maintenance schedule

2025 Royal Enfield Classic 650

On the road: every 300 km

1 item

Check engine oil level

Pre-ride / on the road

Guideline

Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 500 km

3 items

Check lights, horn, brake light switches

Pre-ride / on the road

Guideline
Check tire pressures

Pre-ride / on the road

Guideline
Lubricate drive chain

Pre-ride / on the road

Guideline

Lube warm, ideally at the end of the riding day so it soaks in overnight. Sooner after rain.

On the road: every 1,000 km

1 item

Check chain slack and rear wheel alignment

Pre-ride / on the road

Guideline

Every 500 km

1 item

Rear wheel drive chain (clean, lubricate and adjust)

Final drive

Factory

Factory: Periodical maintenance chart pp.113-116, printed across the columns: Clean, lubricate and adjust every 500 km or earlier as required or after riding in wet/dusty/muddy conditions. Codes: A = adjust; C = clean; I = inspect (clean, adjust, lubricate or replace if necessary); L = lubricate; R = replace. Note: for maintenance after 50,000 km, repeat the same frequency.

Every 1,000 km

3 items

Engine oil level (check)

Engine

Factory

Factory: Periodical maintenance chart pp.113-116, printed across the columns: Engine oil: check level at every 1000 km or earlier and top up as required. Codes: A = adjust; C = clean; I = inspect (clean, adjust, lubricate or replace if necessary); L = lubricate; R = replace. Note: for maintenance after 50,000 km, repeat the same frequency.
Clutch cable/lever free play (adjust)

Primary and gearbox

Factory

Factory: Periodical maintenance chart pp.113-116, printed across the columns: Adjust every 1000 km or earlier as required. Codes: A = adjust; C = clean; I = inspect (clean, adjust, lubricate or replace if necessary); L = lubricate; R = replace. Note: for maintenance after 50,000 km, repeat the same frequency.
Clutch lever and front brake lever pivots (lubricate)

Brakes

Factory

Factory: Periodical maintenance chart pp.113-116, printed across the columns: Lubricate every 1000 km or earlier as required. Codes: A = adjust; C = clean; I = inspect (clean, adjust, lubricate or replace if necessary); L = lubricate; R = replace. Note: for maintenance after 50,000 km, repeat the same frequency.

Every 1,600 km or 6 months

1 item

Inspect tire tread, sidewalls and date codes

Wheels and tires

Guideline

Every 5,000 km or 6 months

19 items

All mounting fasteners in vehicle for tightness (inspect)

Engine

Factory

Factory: Periodical maintenance chart pp.113-116 (km x 1,000 or months, whichever is earlier): I at 500 km/1.5 mo, 5,000 km/6 mo, 10,000 km/12 mo, 15,000 km/18 mo, 20,000 km/24 mo, 25,000 km/30 mo, 30,000 km/36 mo, 35,000 km/42 mo, 40,000 km/48 mo, 45,000 km/54 mo, 50,000 km/60 mo. Codes: A = adjust; C = clean; I = inspect (clean, adjust, lubricate or replace if necessary); L = lubricate; R = replace. Note: for maintenance after 50,000 km, repeat the same frequency.
Evaporative emission equipment rubber hoses (inspect)

Engine

Factory

Factory: Periodical maintenance chart pp.113-116 (km x 1,000 or months, whichever is earlier): I at 500 km/1.5 mo, 5,000 km/6 mo, 10,000 km/12 mo, 15,000 km/18 mo, 20,000 km/24 mo, 25,000 km/30 mo, 30,000 km/36 mo, 35,000 km/42 mo, 40,000 km/48 mo, 45,000 km/54 mo, 50,000 km/60 mo. Codes: A = adjust; C = clean; I = inspect (clean, adjust, lubricate or replace if necessary); L = lubricate; R = replace. Note: for maintenance after 50,000 km, repeat the same frequency.
HT lead (inspect)

Engine

Factory

Factory: Periodical maintenance chart pp.113-116 (km x 1,000 or months, whichever is earlier): I at 500 km/1.5 mo, 5,000 km/6 mo, 10,000 km/12 mo, 15,000 km/18 mo, 20,000 km/24 mo, 25,000 km/30 mo, 30,000 km/36 mo, 35,000 km/42 mo, 40,000 km/48 mo, 45,000 km/54 mo, 50,000 km/60 mo. Codes: A = adjust; C = clean; I = inspect (clean, adjust, lubricate or replace if necessary); L = lubricate; R = replace. Note: for maintenance after 50,000 km, repeat the same frequency.
Headstock bearings (inspect)

Engine

Factory

Factory: Periodical maintenance chart pp.113-116 (km x 1,000 or months, whichever is earlier): I at 500 km/1.5 mo, 5,000 km/6 mo, 10,000 km/12 mo, 15,000 km/18 mo, 20,000 km/24 mo, 25,000 km/30 mo, 30,000 km/36 mo, 35,000 km/42 mo, 40,000 km/48 mo, 45,000 km/54 mo, 50,000 km/60 mo. Codes: A = adjust; C = clean; I = inspect (clean, adjust, lubricate or replace if necessary); L = lubricate; R = replace. Note: for maintenance after 50,000 km, repeat the same frequency.
Rider and pillion footrest pivot (lubricate)

Engine

Factory

Factory: Periodical maintenance chart pp.113-116 (km x 1,000 or months, whichever is earlier): L at 500 km/1.5 mo, 5,000 km/6 mo, 10,000 km/12 mo, 15,000 km/18 mo, 20,000 km/24 mo, 25,000 km/30 mo, 30,000 km/36 mo, 35,000 km/42 mo, 40,000 km/48 mo. Printed as L from 500 km to 40,000 km and as I at 45,000 and 50,000 km. Codes: A = adjust; C = clean; I = inspect (clean, adjust, lubricate or replace if necessary); L = lubricate; R = replace. Note: for maintenance after 50,000 km, repeat the same frequency.
Rubber hose, inlet manifold/adapter (inspect)

Engine

Factory

Factory: Periodical maintenance chart pp.113-116 (km x 1,000 or months, whichever is earlier): I at 500 km/1.5 mo, 5,000 km/6 mo, 10,000 km/12 mo, 15,000 km/18 mo, 20,000 km/24 mo, 25,000 km/30 mo, 30,000 km/36 mo, 35,000 km/42 mo, 40,000 km/48 mo, 45,000 km/54 mo, 50,000 km/60 mo. Codes: A = adjust; C = clean; I = inspect (clean, adjust, lubricate or replace if necessary); L = lubricate; R = replace. Note: for maintenance after 50,000 km, repeat the same frequency.
Spark plug (inspect)

Engine

Factory

Factory: Periodical maintenance chart pp.113-116 (km x 1,000 or months, whichever is earlier): I at 500 km/1.5 mo, 5,000 km/6 mo, 10,000 km/12 mo, 15,000 km/18 mo, 25,000 km/30 mo, 30,000 km/36 mo, 35,000 km/42 mo, 45,000 km/54 mo, 50,000 km/60 mo. Codes: A = adjust; C = clean; I = inspect (clean, adjust, lubricate or replace if necessary); L = lubricate; R = replace. Note: for maintenance after 50,000 km, repeat the same frequency.
Air filter element (clean)

Fuel and air

Factory

Factory: Periodical maintenance chart pp.113-116 (km x 1,000 or months, whichever is earlier): C at 500 km/1.5 mo, 5,000 km/6 mo, 15,000 km/18 mo, 25,000 km/30 mo, 35,000 km/42 mo, 45,000 km/54 mo. Clean/replace more frequently if operated in dusty condition. Codes: A = adjust; C = clean; I = inspect (clean, adjust, lubricate or replace if necessary); L = lubricate; R = replace. Note: for maintenance after 50,000 km, repeat the same frequency.
Rubber hose, air filter to throttle body (inspect)

Fuel and air

Factory

Factory: Periodical maintenance chart pp.113-116 (km x 1,000 or months, whichever is earlier): I at 500 km/1.5 mo, 5,000 km/6 mo, 10,000 km/12 mo, 15,000 km/18 mo, 20,000 km/24 mo, 25,000 km/30 mo, 30,000 km/36 mo, 35,000 km/42 mo, 40,000 km/48 mo, 45,000 km/54 mo, 50,000 km/60 mo. Codes: A = adjust; C = clean; I = inspect (clean, adjust, lubricate or replace if necessary); L = lubricate; R = replace. Note: for maintenance after 50,000 km, repeat the same frequency.
Vent pipe under air filter box (inspect)

Fuel and air

Factory

Factory: Periodical maintenance chart pp.113-116 (km x 1,000 or months, whichever is earlier): I at 500 km/1.5 mo, 5,000 km/6 mo, 10,000 km/12 mo, 15,000 km/18 mo, 20,000 km/24 mo, 25,000 km/30 mo, 30,000 km/36 mo, 35,000 km/42 mo, 40,000 km/48 mo, 45,000 km/54 mo, 50,000 km/60 mo. Codes: A = adjust; C = clean; I = inspect (clean, adjust, lubricate or replace if necessary); L = lubricate; R = replace. Note: for maintenance after 50,000 km, repeat the same frequency.
Battery terminals, apply petroleum jelly (inspect)

Ignition and electrics

Factory

Factory: Periodical maintenance chart pp.113-116 (km x 1,000 or months, whichever is earlier): I at 500 km/1.5 mo, 5,000 km/6 mo, 10,000 km/12 mo, 15,000 km/18 mo, 20,000 km/24 mo, 25,000 km/30 mo, 30,000 km/36 mo, 35,000 km/42 mo, 40,000 km/48 mo, 45,000 km/54 mo, 50,000 km/60 mo. Codes: A = adjust; C = clean; I = inspect (clean, adjust, lubricate or replace if necessary); L = lubricate; R = replace. Note: for maintenance after 50,000 km, repeat the same frequency.
Side stand and center stand pivots (lubricate)

Rear suspension and frame

Factory

Factory: Periodical maintenance chart pp.113-116 (km x 1,000 or months, whichever is earlier): L at 500 km/1.5 mo, 5,000 km/6 mo, 10,000 km/12 mo, 15,000 km/18 mo, 20,000 km/24 mo, 25,000 km/30 mo, 30,000 km/36 mo, 35,000 km/42 mo, 40,000 km/48 mo, 45,000 km/54 mo, 50,000 km/60 mo. Codes: A = adjust; C = clean; I = inspect (clean, adjust, lubricate or replace if necessary); L = lubricate; R = replace. Note: for maintenance after 50,000 km, repeat the same frequency.
Brake fluid, front and rear (inspect)

Brakes

Factory

Factory: Periodical maintenance chart pp.113-116 (km x 1,000 or months, whichever is earlier): I at 500 km/1.5 mo, 5,000 km/6 mo, 10,000 km/12 mo, 15,000 km/18 mo, 25,000 km/30 mo, 30,000 km/36 mo, 35,000 km/42 mo, 45,000 km/54 mo, 50,000 km/60 mo. Codes: A = adjust; C = clean; I = inspect (clean, adjust, lubricate or replace if necessary); L = lubricate; R = replace. Note: for maintenance after 50,000 km, repeat the same frequency.
Brake hose and banjo bolt, front and rear (inspect)

Brakes

Factory

Factory: Periodical maintenance chart pp.113-116 (km x 1,000 or months, whichever is earlier): I at 500 km/1.5 mo, 5,000 km/6 mo, 10,000 km/12 mo, 15,000 km/18 mo, 20,000 km/24 mo, 25,000 km/30 mo, 30,000 km/36 mo, 35,000 km/42 mo, 40,000 km/48 mo, 45,000 km/54 mo, 50,000 km/60 mo. Codes: A = adjust; C = clean; I = inspect (clean, adjust, lubricate or replace if necessary); L = lubricate; R = replace. Note: for maintenance after 50,000 km, repeat the same frequency.
Brake pads, front and rear (inspect)

Brakes

Factory

Factory: Periodical maintenance chart pp.113-116 (km x 1,000 or months, whichever is earlier): I at 500 km/1.5 mo, 5,000 km/6 mo, 10,000 km/12 mo, 15,000 km/18 mo, 20,000 km/24 mo, 25,000 km/30 mo, 30,000 km/36 mo, 35,000 km/42 mo, 40,000 km/48 mo, 45,000 km/54 mo, 50,000 km/60 mo. Codes: A = adjust; C = clean; I = inspect (clean, adjust, lubricate or replace if necessary); L = lubricate; R = replace. Note: for maintenance after 50,000 km, repeat the same frequency.
Rear brake pedal and gear change pedal pivot (lubricate)

Brakes

Factory

Factory: Periodical maintenance chart pp.113-116 (km x 1,000 or months, whichever is earlier): L at 500 km/1.5 mo, 5,000 km/6 mo, 10,000 km/12 mo, 15,000 km/18 mo, 20,000 km/24 mo, 25,000 km/30 mo, 30,000 km/36 mo, 35,000 km/42 mo, 40,000 km/48 mo, 45,000 km/54 mo, 50,000 km/60 mo. Codes: A = adjust; C = clean; I = inspect (clean, adjust, lubricate or replace if necessary); L = lubricate; R = replace. Note: for maintenance after 50,000 km, repeat the same frequency.
Spokes tightness/wheel rim run out, front and rear (inspect)

Wheels and tires

Factory

Factory: Periodical maintenance chart pp.113-116 (km x 1,000 or months, whichever is earlier): I at 500 km/1.5 mo, 5,000 km/6 mo, 10,000 km/12 mo, 15,000 km/18 mo, 20,000 km/24 mo, 25,000 km/30 mo, 30,000 km/36 mo, 35,000 km/42 mo, 40,000 km/48 mo, 45,000 km/54 mo, 50,000 km/60 mo. Codes: A = adjust; C = clean; I = inspect (clean, adjust, lubricate or replace if necessary); L = lubricate; R = replace. Note: for maintenance after 50,000 km, repeat the same frequency.
Tire wear pattern, front and rear (inspect)

Wheels and tires

Factory

Factory: Periodical maintenance chart pp.113-116 (km x 1,000 or months, whichever is earlier): I at 500 km/1.5 mo, 5,000 km/6 mo, 10,000 km/12 mo, 15,000 km/18 mo, 20,000 km/24 mo, 25,000 km/30 mo, 30,000 km/36 mo, 35,000 km/42 mo, 40,000 km/48 mo, 45,000 km/54 mo, 50,000 km/60 mo. Codes: A = adjust; C = clean; I = inspect (clean, adjust, lubricate or replace if necessary); L = lubricate; R = replace. Note: for maintenance after 50,000 km, repeat the same frequency.
Throttle cable (adjust)

Controls and cables

Factory

Factory: Periodical maintenance chart pp.113-116 (km x 1,000 or months, whichever is earlier): A at 500 km/1.5 mo, 5,000 km/6 mo, 10,000 km/12 mo, 15,000 km/18 mo, 20,000 km/24 mo, 25,000 km/30 mo, 30,000 km/36 mo, 35,000 km/42 mo, 40,000 km/48 mo, 45,000 km/54 mo, 50,000 km/60 mo. Codes: A = adjust; C = clean; I = inspect (clean, adjust, lubricate or replace if necessary); L = lubricate; R = replace. Note: for maintenance after 50,000 km, repeat the same frequency.

Every 5,000 km or 12 months

10 items

Check throttle cable(s) free play and return

Fuel and air

Guideline
Clean drive chain thoroughly (remove and soak, re-lube)

Final drive

Guideline

Non O-ring chains on old machines: remove, clean, soak in hot chain grease or lube, refit with the master link clip closed end leading.
Inspect chain and sprockets for wear (measure stretch)

Final drive

Guideline
Check steering head bearing adjustment

Front end

Guideline
Inspect fork seals, stanchions and fork boots

Front end

Guideline
Check footrests, pegs, rear brake and gear lever pivots

Rear suspension and frame

Guideline
Grease and check center / side stand and springs

Rear suspension and frame

Guideline
Check brake pads and discs

Brakes

Guideline
Check spoke tension and wheel true

Wheels and tires

Guideline
Check wheel bearings for play

Wheels and tires

Guideline

Every 6,500 km or 12 months

2 items

Inspect, clean and gap spark plugs

Engine

Guideline
Adjust clutch free play, lubricate cable and lever pivot

Primary and gearbox

Guideline

Every 8,000 km or 12 months

2 items

Change engine oil

Engine

Guideline

Pre-1970 machines: many owners run non-detergent or classic-spec oil with no filter, so short intervals matter. Dry sump: drain the tank and the crankcase/sump, flush the tank and clean the feed and return screens.
Replace oil filter

Engine

Guideline

Every 9,500 km or 12 months

6 items

Clean / inspect air filter

Fuel and air

Guideline

Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.
Check charging voltage and regulator / cut-out

Ignition and electrics

Guideline
Check swingarm bushes for play

Rear suspension and frame

Guideline
Inspect rear shocks for leaks and damping

Rear suspension and frame

Guideline
Lubricate control cables and lever pivots

Controls and cables

Guideline
Lubricate speedometer / tachometer cables, check drive

Controls and cables

Guideline

A dry speedo cable whips the needle and eventually kills the instrument.

Every 10,000 km or 12 months

5 items

Earth wire eyelet tightness (inspect)

Engine

Factory

Factory: Periodical maintenance chart pp.113-116 (km x 1,000 or months, whichever is earlier): I at 10,000 km/12 mo, 20,000 km/24 mo, 30,000 km/36 mo, 40,000 km/48 mo, 45,000 km/54 mo, 50,000 km/60 mo. Printed marks fall at 10, 20, 30, 40, 45 and 50 thousand km. Codes: A = adjust; C = clean; I = inspect (clean, adjust, lubricate or replace if necessary); L = lubricate; R = replace. Note: for maintenance after 50,000 km, repeat the same frequency.
Engine oil (replace)

Engine

Factory

Factory: Periodical maintenance chart pp.113-116 (km x 1,000 or months, whichever is earlier): R at 500 km/1.5 mo, 10,000 km/12 mo, 20,000 km/24 mo, 30,000 km/36 mo, 40,000 km/48 mo, 50,000 km/60 mo. (#) After first service, engine oil and engine oil filter replacement is required every 12 months regardless of kilometer. Codes: A = adjust; C = clean; I = inspect (clean, adjust, lubricate or replace if necessary); L = lubricate; R = replace. Note: for maintenance after 50,000 km, repeat the same frequency.
Engine oil filter (replace)

Engine

Factory

Factory: Periodical maintenance chart pp.113-116 (km x 1,000 or months, whichever is earlier): R at 500 km/1.5 mo, 10,000 km/12 mo, 20,000 km/24 mo, 30,000 km/36 mo, 40,000 km/48 mo, 50,000 km/60 mo. (#) After first service, engine oil and engine oil filter replacement is required every 12 months regardless of kilometer. Codes: A = adjust; C = clean; I = inspect (clean, adjust, lubricate or replace if necessary); L = lubricate; R = replace. Note: for maintenance after 50,000 km, repeat the same frequency.
Inlet and exhaust valve clearance (inspect)

Engine

Factory

Factory: Periodical maintenance chart pp.113-116 (km x 1,000 or months, whichever is earlier): I at 10,000 km/12 mo, 20,000 km/24 mo, 30,000 km/36 mo, 40,000 km/48 mo, 50,000 km/60 mo. (**) After first service, valve clearance adjustment is required every 12 months regardless of kilometer. Codes: A = adjust; C = clean; I = inspect (clean, adjust, lubricate or replace if necessary); L = lubricate; R = replace. Note: for maintenance after 50,000 km, repeat the same frequency.
Air filter element (replace)

Fuel and air

Factory

Factory: Periodical maintenance chart pp.113-116 (km x 1,000 or months, whichever is earlier): R at 10,000 km/12 mo, 20,000 km/24 mo, 30,000 km/36 mo, 40,000 km/48 mo, 50,000 km/60 mo. Clean/replace more frequently if operated in dusty condition. Codes: A = adjust; C = clean; I = inspect (clean, adjust, lubricate or replace if necessary); L = lubricate; R = replace. Note: for maintenance after 50,000 km, repeat the same frequency.

Every 16,000 km or 2 years

1 item

Compression test (or leak-down)

Engine

Guideline

Every 19,500 km or 2 years

3 items

Replace air filter element

Fuel and air

Guideline
Synchronize throttle bodies

Fuel and air

Guideline
Grease swingarm pivot

Rear suspension and frame

Guideline

Every 20,000 km or 2 years

3 items

Spark plug (replace)

Engine

Factory

Factory: Periodical maintenance chart pp.113-116 (km x 1,000 or months, whichever is earlier): R at 20,000 km/24 mo, 40,000 km/48 mo. Codes: A = adjust; C = clean; I = inspect (clean, adjust, lubricate or replace if necessary); L = lubricate; R = replace. Note: for maintenance after 50,000 km, repeat the same frequency.
Brake fluid, front and rear (replace)

Brakes

Factory

Factory: Periodical maintenance chart pp.113-116 (km x 1,000 or months, whichever is earlier): R at 20,000 km/24 mo, 40,000 km/48 mo. Codes: A = adjust; C = clean; I = inspect (clean, adjust, lubricate or replace if necessary); L = lubricate; R = replace. Note: for maintenance after 50,000 km, repeat the same frequency.
Rear wheel cush rubbers (inspect)

Wheels and tires

Factory

Factory: Periodical maintenance chart pp.113-116 (km x 1,000 or months, whichever is earlier): I at 20,000 km/24 mo, 40,000 km/48 mo. Codes: A = adjust; C = clean; I = inspect (clean, adjust, lubricate or replace if necessary); L = lubricate; R = replace. Note: for maintenance after 50,000 km, repeat the same frequency.

Every 24,000 km or 3 years

1 item

Change fork oil

Front end

Guideline

Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 24,000 km or 4 years

1 item

Check valve clearances (shim adjusted)

Engine

Guideline

Every 25,500 km or 4 years

1 item

Replace spark plugs

Engine

Guideline

Every 29,000 km

1 item

Replace chain and sprockets (wear based)

Final drive

Guideline

Every 32,000 km or 4 years

2 items

Repack / replace steering head bearings

Front end

Guideline

Many old machines use loose balls in cups and cones. Taper roller conversions are common.
Repack / replace wheel bearings

Wheels and tires

Guideline

Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 38,500 km or 4 years

1 item

Replace fuel filter

Fuel and air

Guideline

Every 40,000 km or 6 years

1 item

Replace swingarm bushes / bearings

Rear suspension and frame

Guideline

Every 48,500 km or 6 years

1 item

Rebuild forks: seals, bushes, springs

Front end

Guideline

Every 6 months

1 item

Clean battery terminals, check charge and strap

Ignition and electrics

Guideline

Every 2 years

3 items

Inspect wiring, bullet connectors and ground points

Ignition and electrics

Guideline
Inspect frame, welds and lugs for cracks

Rear suspension and frame

Guideline
Replace brake fluid

Brakes

Guideline

Every 4 years

3 items

Replace fuel lines

Fuel and air

Guideline

Old rubber and modern ethanol fuel do not mix well.
Inspect brake hoses; replace old rubber

Brakes

Guideline
Rebuild calipers and master cylinders (seals)

Brakes

Guideline

Every 6 years

2 items

Replace inner tubes and rim tape with tires

Wheels and tires

Guideline
Replace tires on age (regardless of tread)

Wheels and tires

Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.