MotoService Log
No photo of this model in the library yet.
Victory · Overhead-cam four-stroke twin, wet sump, gearbox shares engine oil, belt drive

Cross Country (1737 cc)

Library entry covers 2010-2018

48 factory 44 guideline

Published source

Victory 2012 Rider's Manual (Cross Roads / Cross Country family), Periodic Maintenance Table printed p.55 (ManualsLib 766438 page 59)

Factory owner's handbook. Covers Victory 2012 Rider's Manual covering the Cross Roads, Cross Roads Limited Edition, Cross Country, Cross Country Tour and Ness Signature Series Cross Country.

92 items for a 2016 model, grouped by interval the way a factory chart is laid out.

How this bike is built (what the schedule is based on)
Engine cycle
Four-stroke
Engine lubrication
Wet sump (oil in crankcase)
Oil filtration
Replaceable cartridge or spin-on filter
Valve gear
Overhead cam, screw/locknut adjusters
Ignition
Electronic (CDI / transistor / ECU)
Charging
Alternator / stator with rectifier
Battery
Wet cell (flooded lead-acid, needs topping up)
Fuel system
Fuel injection
Cooling
Air / oil cooled
Primary drive
Gear or chain inside engine, shares engine oil
Gearbox oil
Shares engine oil
Clutch control
Hand lever, cable
Final drive
Toothed belt
Front suspension
Telescopic fork
Rear suspension
Swingarm, single shock / cantilever
Front brake
Disc, hydraulic
Rear brake
Disc, hydraulic
Wheels
Cast / alloy, tubeless
Sidecar
No sidecar
Maintenance schedule

2016 Victory Cross Country (1737 cc)

On the road: every 200 mi

1 item
  • Check engine oil level
    Pre-ride / on the road
    Guideline

    Each fuel stop on old machines. Dry sump: check the tank hot, engine idling or just stopped, per your manual.

On the road: every 300 mi

2 items
  • Check lights, horn, brake light switches
    Pre-ride / on the road
    Guideline
  • Check tire pressures
    Pre-ride / on the road
    Guideline

Every 500 mi

1 item
  • Drive belt adjustment
    Engine
    Factory

    Factory: Periodic Maintenance Table (printed p.55): P at 500 mi (800 km); adjust with each tire change thereafter. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

Every 1,000 mi or 6 months

1 item
  • Inspect tire tread, sidewalls and date codes
    Wheels and tires
    Guideline

Every 3,000 mi or 12 months

7 items
  • Check throttle cable(s) free play and return
    Fuel and air
    Guideline
  • Check steering head bearing adjustment
    Front end
    Guideline
  • Inspect fork seals, stanchions and fork boots
    Front end
    Guideline
  • Check footrests, pegs, rear brake and gear lever pivots
    Rear suspension and frame
    Guideline
  • Grease and check center / side stand and springs
    Rear suspension and frame
    Guideline
  • Check brake pads and discs
    Brakes
    Guideline
  • Check wheel bearings for play
    Wheels and tires
    Guideline

Every 4,000 mi or 12 months

2 items
  • Inspect, clean and gap spark plugs
    Engine
    Guideline
  • Adjust clutch free play, lubricate cable and lever pivot
    Primary and gearbox
    Guideline

Every 5,000 mi or 12 months

4 items
  • Change engine oil
    Engine
    Guideline

    Pre-1970 machines: many owners run non-detergent or classic-spec oil with no filter, so short intervals matter. Dry sump: drain the tank and the crankcase/sump, flush the tank and clean the feed and return screens.

  • Engine oil and filter (replace)
    Engine
    Factory

    Factory: Periodic Maintenance Table (printed p.55): R at 500 mi, 5,000 mi, 10,000 mi, 15,000 mi, 20,000 mi, 25,000 mi, 30,000 mi, 35,000 mi, 40,000 mi, 45,000 mi, 50,000 mi. Starred: replace at specified interval or annually. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Replace oil filter
    Engine
    Guideline
  • Inspect drive belt, pulleys and tension
    Final drive
    Guideline

Every 5,000 mi

31 items
  • ABS components (inspect)
    Engine
    Factory

    Factory: Periodic Maintenance Table (printed p.55): I at 500 mi, 5,000 mi, 10,000 mi, 15,000 mi, 20,000 mi, 25,000 mi, 30,000 mi, 35,000 mi, 40,000 mi, 45,000 mi, 50,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Crankcase vent (inspect)
    Engine
    Factory

    Factory: Periodic Maintenance Table (printed p.55): I at 500 mi, 5,000 mi, 10,000 mi, 15,000 mi, 20,000 mi, 25,000 mi, 30,000 mi, 35,000 mi, 40,000 mi, 45,000 mi, 50,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Drive belt (inspect)
    Engine
    Factory

    Factory: Periodic Maintenance Table (printed p.55): I at 500 mi, 5,000 mi, 10,000 mi, 15,000 mi, 20,000 mi, 25,000 mi, 35,000 mi, 40,000 mi, 45,000 mi, 50,000 mi. Also R at 30,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Exhaust system (inspect)
    Engine
    Factory

    Factory: Periodic Maintenance Table (printed p.55): I at 500 mi, 5,000 mi, 10,000 mi, 15,000 mi, 20,000 mi, 25,000 mi, 30,000 mi, 35,000 mi, 40,000 mi, 45,000 mi, 50,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Fasteners (inspect)
    Engine
    Factory

    Factory: Periodic Maintenance Table (printed p.55): I at 500 mi, 5,000 mi, 10,000 mi, 15,000 mi, 20,000 mi, 25,000 mi, 30,000 mi, 35,000 mi, 40,000 mi, 45,000 mi, 50,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Road test
    Engine
    Factory

    Factory: Periodic Maintenance Table (printed p.55): P at 500 mi, 5,000 mi, 10,000 mi, 15,000 mi, 20,000 mi, 25,000 mi, 30,000 mi, 35,000 mi, 40,000 mi, 45,000 mi, 50,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Spark plugs (inspect)
    Engine
    Factory

    Factory: Periodic Maintenance Table (printed p.55): I at 500 mi, 5,000 mi, 10,000 mi, 15,000 mi, 20,000 mi, 25,000 mi, 35,000 mi, 40,000 mi, 45,000 mi, 50,000 mi. Also R at 30,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Air filter (inspect)
    Fuel and air
    Factory

    Factory: Periodic Maintenance Table (printed p.55): I at 500 mi, 5,000 mi, 15,000 mi, 25,000 mi, 35,000 mi, 45,000 mi. Also R at 10,000 mi; R at 20,000 mi; R at 30,000 mi; R at 40,000 mi; R at 50,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Fuel system (inspect)
    Fuel and air
    Factory

    Factory: Periodic Maintenance Table (printed p.55): I at 500 mi, 5,000 mi, 10,000 mi, 15,000 mi, 20,000 mi, 25,000 mi, 30,000 mi, 35,000 mi, 40,000 mi, 45,000 mi, 50,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Battery (inspect)
    Ignition and electrics
    Factory

    Factory: Periodic Maintenance Table (printed p.55): I at 500 mi, 5,000 mi, 10,000 mi, 15,000 mi, 20,000 mi, 25,000 mi, 30,000 mi, 35,000 mi, 40,000 mi, 45,000 mi, 50,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Ignition switch/locks (lubricate)
    Ignition and electrics
    Factory

    Factory: Periodic Maintenance Table (printed p.55): L at 5,000 mi, 10,000 mi, 15,000 mi, 20,000 mi, 25,000 mi, 30,000 mi, 35,000 mi, 40,000 mi, 45,000 mi, 50,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Clutch cable (inspect)
    Primary and gearbox
    Factory

    Factory: Periodic Maintenance Table (printed p.55): I at 500 mi, 5,000 mi, 15,000 mi, 25,000 mi, 35,000 mi, 45,000 mi. Also L at 10,000 mi; L at 20,000 mi; L at 30,000 mi; L at 40,000 mi; L at 50,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Clutch lever, mechanical (inspect)
    Primary and gearbox
    Factory

    Factory: Periodic Maintenance Table (printed p.55): I at 5,000 mi, 15,000 mi, 25,000 mi, 35,000 mi, 45,000 mi. Also L at 500 mi; L at 10,000 mi; L at 20,000 mi; L at 30,000 mi; L at 40,000 mi; L at 50,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Front fork oil (inspect)
    Front end
    Factory

    Factory: Periodic Maintenance Table (printed p.55): I at 500 mi, 5,000 mi, 10,000 mi, 20,000 mi, 25,000 mi, 35,000 mi, 40,000 mi, 50,000 mi. Also R at 15,000 mi; R at 30,000 mi; R at 45,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Front fork/axle (inspect)
    Front end
    Factory

    Factory: Periodic Maintenance Table (printed p.55): I at 500 mi, 5,000 mi, 10,000 mi, 15,000 mi, 20,000 mi, 25,000 mi, 30,000 mi, 35,000 mi, 40,000 mi, 45,000 mi, 50,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Steering head bearings (inspect)
    Front end
    Factory

    Factory: Periodic Maintenance Table (printed p.55): I at 500 mi, 5,000 mi, 10,000 mi, 20,000 mi, 25,000 mi, 35,000 mi, 40,000 mi, 50,000 mi. Also L at 15,000 mi; L at 30,000 mi; L at 45,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Rear shock (inspect)
    Rear suspension and frame
    Factory

    Factory: Periodic Maintenance Table (printed p.55): I at 500 mi, 5,000 mi, 10,000 mi, 15,000 mi, 20,000 mi, 25,000 mi, 30,000 mi, 35,000 mi, 40,000 mi, 45,000 mi, 50,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Sidestand (inspect)
    Rear suspension and frame
    Factory

    Factory: Periodic Maintenance Table (printed p.55): I at 500 mi, 5,000 mi, 15,000 mi, 25,000 mi, 35,000 mi, 45,000 mi. Also L at 10,000 mi; L at 20,000 mi; L at 30,000 mi; L at 40,000 mi; L at 50,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Sidestand pad (inspect)
    Rear suspension and frame
    Factory

    Factory: Periodic Maintenance Table (printed p.55): I at 500 mi, 5,000 mi, 10,000 mi, 15,000 mi, 20,000 mi, 25,000 mi, 30,000 mi, 35,000 mi, 40,000 mi, 45,000 mi, 50,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Swingarm (inspect)
    Rear suspension and frame
    Factory

    Factory: Periodic Maintenance Table (printed p.55): I at 500 mi, 5,000 mi, 10,000 mi, 15,000 mi, 20,000 mi, 25,000 mi, 30,000 mi, 35,000 mi, 40,000 mi, 45,000 mi, 50,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Brake fluid (inspect)
    Brakes
    Factory

    Factory: Periodic Maintenance Table (printed p.55): I at 500 mi, 5,000 mi, 10,000 mi, 15,000 mi, 20,000 mi, 25,000 mi, 35,000 mi, 40,000 mi, 45,000 mi, 50,000 mi. Also R at 30,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Brake pads (inspect)
    Brakes
    Factory

    Factory: Periodic Maintenance Table (printed p.55): I at 500 mi, 5,000 mi, 10,000 mi, 15,000 mi, 20,000 mi, 25,000 mi, 30,000 mi, 35,000 mi, 40,000 mi, 45,000 mi, 50,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Front brake lever (lubricate)
    Brakes
    Factory

    Factory: Periodic Maintenance Table (printed p.55): L at 500 mi, 5,000 mi, 10,000 mi, 15,000 mi, 20,000 mi, 25,000 mi, 30,000 mi, 35,000 mi, 40,000 mi, 45,000 mi, 50,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Rear brake pedal (inspect)
    Brakes
    Factory

    Factory: Periodic Maintenance Table (printed p.55): I at 500 mi, 5,000 mi, 15,000 mi, 25,000 mi, 35,000 mi, 45,000 mi. Also L at 10,000 mi; L at 20,000 mi; L at 30,000 mi; L at 40,000 mi; L at 50,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Rear wheel alignment (inspect)
    Wheels and tires
    Factory

    Factory: Periodic Maintenance Table (printed p.55): I at 500 mi, 5,000 mi, 10,000 mi, 15,000 mi, 20,000 mi, 25,000 mi, 30,000 mi, 35,000 mi, 40,000 mi, 45,000 mi, 50,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Tires (inspect)
    Wheels and tires
    Factory

    Factory: Periodic Maintenance Table (printed p.55): I at 500 mi, 5,000 mi, 10,000 mi, 15,000 mi, 20,000 mi, 25,000 mi, 30,000 mi, 35,000 mi, 40,000 mi, 45,000 mi, 50,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Wheel condition (inspect)
    Wheels and tires
    Factory

    Factory: Periodic Maintenance Table (printed p.55): I at 500 mi, 5,000 mi, 10,000 mi, 15,000 mi, 20,000 mi, 25,000 mi, 30,000 mi, 35,000 mi, 40,000 mi, 45,000 mi, 50,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Wheel spokes (inspect)
    Wheels and tires
    Factory

    Factory: Periodic Maintenance Table (printed p.55): I at 500 mi, 5,000 mi, 10,000 mi, 15,000 mi, 20,000 mi, 25,000 mi, 30,000 mi, 35,000 mi, 40,000 mi, 45,000 mi, 50,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Control cables (inspect)
    Controls and cables
    Factory

    Factory: Periodic Maintenance Table (printed p.55): I at 500 mi, 5,000 mi, 15,000 mi, 25,000 mi, 35,000 mi, 45,000 mi. Also L at 10,000 mi; L at 20,000 mi; L at 30,000 mi; L at 40,000 mi; L at 50,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Evaporative emission control system, if equipped (inspect)
    Controls and cables
    Factory

    Factory: Periodic Maintenance Table (printed p.55): I at 500 mi, 5,000 mi, 10,000 mi, 15,000 mi, 20,000 mi, 25,000 mi, 30,000 mi, 35,000 mi, 40,000 mi, 45,000 mi, 50,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Throttle cable (inspect)
    Controls and cables
    Factory

    Factory: Periodic Maintenance Table (printed p.55): I at 500 mi, 5,000 mi, 15,000 mi, 25,000 mi, 35,000 mi, 45,000 mi. Also L at 10,000 mi; L at 20,000 mi; L at 30,000 mi; L at 40,000 mi; L at 50,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

Every 6,000 mi or 12 months

6 items
  • Clean / inspect air filter
    Fuel and air
    Guideline

    Mesh or oiled foam: clean and re-oil. Paper: blow out or replace. Some very early machines have no filter at all.

  • Check charging voltage and regulator / cut-out
    Ignition and electrics
    Guideline
  • Check swingarm bushes for play
    Rear suspension and frame
    Guideline
  • Inspect rear shocks for leaks and damping
    Rear suspension and frame
    Guideline
  • Lubricate control cables and lever pivots
    Controls and cables
    Guideline
  • Lubricate speedometer / tachometer cables, check drive
    Controls and cables
    Guideline

    A dry speedo cable whips the needle and eventually kills the instrument.

Every 8,000 mi or 2 years

1 item
  • Check and adjust valve clearances
    Engine
    Guideline

Every 10,000 mi or 2 years

1 item
  • Compression test (or leak-down)
    Engine
    Guideline

Every 10,000 mi

8 items
  • Headlamp (inspect)
    Engine
    Factory

    Factory: Periodic Maintenance Table (printed p.55): I at 500 mi, 10,000 mi, 20,000 mi, 30,000 mi, 40,000 mi, 50,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Air filter (replace)
    Fuel and air
    Factory

    Factory: Periodic Maintenance Table (printed p.55): R at 10,000 mi, 20,000 mi, 30,000 mi, 40,000 mi, 50,000 mi. Also I at 500 mi; I at 5,000 mi; I at 15,000 mi; I at 25,000 mi; I at 35,000 mi; I at 45,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Clutch cable (lubricate)
    Primary and gearbox
    Factory

    Factory: Periodic Maintenance Table (printed p.55): L at 10,000 mi, 20,000 mi, 30,000 mi, 40,000 mi, 50,000 mi. Also I at 500 mi; I at 5,000 mi; I at 15,000 mi; I at 25,000 mi; I at 35,000 mi; I at 45,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Clutch lever, mechanical (lubricate)
    Primary and gearbox
    Factory

    Factory: Periodic Maintenance Table (printed p.55): L at 500 mi, 10,000 mi, 20,000 mi, 30,000 mi, 40,000 mi, 50,000 mi. Also I at 5,000 mi; I at 15,000 mi; I at 25,000 mi; I at 35,000 mi; I at 45,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Sidestand (lubricate)
    Rear suspension and frame
    Factory

    Factory: Periodic Maintenance Table (printed p.55): L at 10,000 mi, 20,000 mi, 30,000 mi, 40,000 mi, 50,000 mi. Also I at 500 mi; I at 5,000 mi; I at 15,000 mi; I at 25,000 mi; I at 35,000 mi; I at 45,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Rear brake pedal (lubricate)
    Brakes
    Factory

    Factory: Periodic Maintenance Table (printed p.55): L at 10,000 mi, 20,000 mi, 30,000 mi, 40,000 mi, 50,000 mi. Also I at 500 mi; I at 5,000 mi; I at 15,000 mi; I at 25,000 mi; I at 35,000 mi; I at 45,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Control cables (lubricate)
    Controls and cables
    Factory

    Factory: Periodic Maintenance Table (printed p.55): L at 10,000 mi, 20,000 mi, 30,000 mi, 40,000 mi, 50,000 mi. Also I at 500 mi; I at 5,000 mi; I at 15,000 mi; I at 25,000 mi; I at 35,000 mi; I at 45,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Throttle cable (lubricate)
    Controls and cables
    Factory

    Factory: Periodic Maintenance Table (printed p.55): L at 10,000 mi, 20,000 mi, 30,000 mi, 40,000 mi, 50,000 mi. Also I at 500 mi; I at 5,000 mi; I at 15,000 mi; I at 25,000 mi; I at 35,000 mi; I at 45,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

Every 12,000 mi or 2 years

4 items
  • Replace air filter element
    Fuel and air
    Guideline
  • Synchronize throttle bodies
    Fuel and air
    Guideline
  • Clean and grease rear suspension linkage
    Rear suspension and frame
    Guideline
  • Grease swingarm pivot
    Rear suspension and frame
    Guideline

Every 15,000 mi or 2 years

1 item
  • Front fork oil (replace)
    Front end
    Factory

    Factory: Periodic Maintenance Table (printed p.55): R at 15,000 mi, 30,000 mi, 45,000 mi. Also I at 500 mi; I at 5,000 mi; I at 10,000 mi; I at 20,000 mi; I at 25,000 mi; I at 35,000 mi; I at 40,000 mi; I at 50,000 mi. Double-starred: replace as specified or every 2 years. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

Every 15,000 mi or 3 years

1 item
  • Change fork oil
    Front end
    Guideline

    Some early telescopic forks are grease filled or use very small oil quantities. Check your manual.

Every 15,000 mi

1 item
  • Steering head bearings (lubricate)
    Front end
    Factory

    Factory: Periodic Maintenance Table (printed p.55): L at 15,000 mi, 30,000 mi, 45,000 mi. Also I at 500 mi; I at 5,000 mi; I at 10,000 mi; I at 20,000 mi; I at 25,000 mi; I at 35,000 mi; I at 40,000 mi; I at 50,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

Every 16,000 mi or 4 years

1 item
  • Replace spark plugs
    Engine
    Guideline

Every 20,000 mi or 4 years

2 items
  • Repack / replace steering head bearings
    Front end
    Guideline

    Many old machines use loose balls in cups and cones. Taper roller conversions are common.

  • Repack / replace wheel bearings
    Wheels and tires
    Guideline

    Cup-and-cone and taper roller hubs need periodic repacking and adjustment.

Every 24,000 mi or 4 years

1 item
  • Replace fuel filter
    Fuel and air
    Guideline

Every 25,000 mi or 6 years

1 item
  • Replace swingarm bushes / bearings
    Rear suspension and frame
    Guideline

Every 30,000 mi or 6 years

1 item
  • Rebuild forks: seals, bushes, springs
    Front end
    Guideline

Every 30,000 mi

4 items
  • Drive belt (replace)
    Engine
    Factory

    Factory: Periodic Maintenance Table (printed p.55): R at 30,000 mi. Also I at 500 mi; I at 5,000 mi; I at 10,000 mi; I at 15,000 mi; I at 20,000 mi; I at 25,000 mi; I at 35,000 mi; I at 40,000 mi; I at 45,000 mi; I at 50,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Spark plugs (replace)
    Engine
    Factory

    Factory: Periodic Maintenance Table (printed p.55): R at 30,000 mi. Also I at 500 mi; I at 5,000 mi; I at 10,000 mi; I at 15,000 mi; I at 20,000 mi; I at 25,000 mi; I at 35,000 mi; I at 40,000 mi; I at 45,000 mi; I at 50,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Fuel filter (replace, dealer)
    Fuel and air
    Factory

    Factory: Periodic Maintenance Table (printed p.55): R at 30,000 mi. Printed: please see your dealer for this service. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

  • Brake fluid (replace)
    Brakes
    Factory

    Factory: Periodic Maintenance Table (printed p.55): R at 30,000 mi. Also I at 500 mi; I at 5,000 mi; I at 10,000 mi; I at 15,000 mi; I at 20,000 mi; I at 25,000 mi; I at 35,000 mi; I at 40,000 mi; I at 45,000 mi; I at 50,000 mi. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

Every 50,000 mi

1 item
  • Replace drive belt (wear or damage based)
    Final drive
    Guideline

Every 6 months

1 item
  • Clean battery terminals, check charge and strap
    Ignition and electrics
    Guideline

Every 12 months

1 item
  • Radio/radio software (update)
    Engine
    Factory

    Factory: Periodic Maintenance Table (printed p.55): update annually; please see your dealer. Maintenance key: I = inspect, clean, adjust, correct or replace if necessary; P = perform; R = replace/rebuild; L = lubricate with proper lubricant; * = replace at specified interval or annually; ** = replace as specified or every 2 years.

Every 2 years

3 items
  • Inspect wiring, bullet connectors and ground points
    Ignition and electrics
    Guideline
  • Inspect frame, welds and lugs for cracks
    Rear suspension and frame
    Guideline
  • Replace brake fluid
    Brakes
    Guideline

Every 4 years

3 items
  • Replace fuel lines
    Fuel and air
    Guideline

    Old rubber and modern ethanol fuel do not mix well.

  • Inspect brake hoses; replace old rubber
    Brakes
    Guideline
  • Rebuild calipers and master cylinders (seals)
    Brakes
    Guideline

Every 6 years

1 item
  • Replace tires on age (regardless of tread)
    Wheels and tires
    Guideline

Guideline lines: Intervals here are general guidelines for the machine's era and layout, compiled for this app. They are not factory manual figures. Check your workshop manual, and edit any interval in the bike's Schedule tab.

Keep up with this schedule on your phone

Add the bike in the app and this chart loads itself, ready to log against and edit.

Coming soon to Google Play

Other 2016 Victory models

All 2016 Victory